From: Puranjay Mohan <puranjay@kernel.org>
To: bpf@vger.kernel.org
Cc: Puranjay Mohan <puranjay@kernel.org>,
Puranjay Mohan <puranjay12@gmail.com>,
Alexei Starovoitov <ast@kernel.org>,
Andrii Nakryiko <andrii@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Martin KaFai Lau <martin.lau@kernel.org>,
Eduard Zingerman <eddyz87@gmail.com>,
Kumar Kartikeya Dwivedi <memxor@gmail.com>,
Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>,
Fei Chen <feichen@meta.com>, Taruna Agrawal <taragrawal@meta.com>,
Nikhil Dixit Limaye <ndixit@meta.com>,
"Nikita V. Shirokov" <tehnerd@tehnerd.com>,
kernel-team@meta.com
Subject: [PATCH bpf-next 3/7] selftests/bpf: Add bpf-nop benchmark for timing overhead baseline
Date: Mon, 27 Apr 2026 16:23:00 -0700 [thread overview]
Message-ID: <20260427232313.1582588-4-puranjay@kernel.org> (raw)
In-Reply-To: <20260427232313.1582588-1-puranjay@kernel.org>
Add a minimal benchmark that measures the overhead of the batch-timing
infrastructure itself. The BPF program runs an empty BENCH_BPF_LOOP body
(~1.5-2 ns/op), establishing the floor cost that all timing-library
benchmarks include.
[root@virtme-ng tools/testing/selftests/bpf]# sudo ./bench -a -p8 bpf-nop
Setting up benchmark 'bpf-nop'...
Benchmark 'bpf-nop' started.
bpf-nop: median 1.82 ns/op, stddev 0.01, p99 1.86 (1754 samples)
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
---
tools/testing/selftests/bpf/Makefile | 2 +
tools/testing/selftests/bpf/bench.c | 2 +
.../selftests/bpf/benchs/bench_bpf_nop.c | 84 +++++++++++++++++++
.../selftests/bpf/progs/bpf_nop_bench.c | 14 ++++
4 files changed, 102 insertions(+)
create mode 100644 tools/testing/selftests/bpf/benchs/bench_bpf_nop.c
create mode 100644 tools/testing/selftests/bpf/progs/bpf_nop_bench.c
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 3d516f10f29e..97f9fbd41244 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -906,6 +906,7 @@ $(OUTPUT)/bench_htab_mem.o: $(OUTPUT)/htab_mem_bench.skel.h
$(OUTPUT)/bench_bpf_crypto.o: $(OUTPUT)/crypto_bench.skel.h
$(OUTPUT)/bench_sockmap.o: $(OUTPUT)/bench_sockmap_prog.skel.h
$(OUTPUT)/bench_lpm_trie_map.o: $(OUTPUT)/lpm_trie_bench.skel.h $(OUTPUT)/lpm_trie_map.skel.h
+$(OUTPUT)/bench_bpf_nop.o: $(OUTPUT)/bpf_nop_bench.skel.h bench_bpf_timing.h
$(OUTPUT)/bench_bpf_timing.o: bench_bpf_timing.h
$(OUTPUT)/bench.o: bench.h testing_helpers.h $(BPFOBJ)
$(OUTPUT)/bench: LDLIBS += -lm
@@ -930,6 +931,7 @@ $(OUTPUT)/bench: $(OUTPUT)/bench.o \
$(OUTPUT)/bench_sockmap.o \
$(OUTPUT)/bench_lpm_trie_map.o \
$(OUTPUT)/bench_bpf_timing.o \
+ $(OUTPUT)/bench_bpf_nop.o \
$(OUTPUT)/usdt_1.o \
$(OUTPUT)/usdt_2.o \
#
diff --git a/tools/testing/selftests/bpf/bench.c b/tools/testing/selftests/bpf/bench.c
index 47a4e72208d6..1696de5d6780 100644
--- a/tools/testing/selftests/bpf/bench.c
+++ b/tools/testing/selftests/bpf/bench.c
@@ -575,6 +575,7 @@ extern const struct bench bench_lpm_trie_insert;
extern const struct bench bench_lpm_trie_update;
extern const struct bench bench_lpm_trie_delete;
extern const struct bench bench_lpm_trie_free;
+extern const struct bench bench_bpf_nop;
static const struct bench *benchs[] = {
&bench_count_global,
@@ -653,6 +654,7 @@ static const struct bench *benchs[] = {
&bench_lpm_trie_update,
&bench_lpm_trie_delete,
&bench_lpm_trie_free,
+ &bench_bpf_nop,
};
static void find_benchmark(void)
diff --git a/tools/testing/selftests/bpf/benchs/bench_bpf_nop.c b/tools/testing/selftests/bpf/benchs/bench_bpf_nop.c
new file mode 100644
index 000000000000..e2d8c2ccf384
--- /dev/null
+++ b/tools/testing/selftests/bpf/benchs/bench_bpf_nop.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Meta Platforms, Inc. and affiliates. */
+
+#include "bench.h"
+#include "bench_bpf_timing.h"
+#include "bpf_nop_bench.skel.h"
+#include "bpf_util.h"
+
+static struct ctx {
+ struct bpf_nop_bench *skel;
+ struct bpf_bench_timing timing;
+ int prog_fd;
+} ctx;
+
+static void nop_validate(void)
+{
+ if (env.consumer_cnt != 0) {
+ fprintf(stderr, "benchmark doesn't support consumers\n");
+ exit(1);
+ }
+}
+
+static void nop_run_once(void *unused __always_unused)
+{
+ LIBBPF_OPTS(bpf_test_run_opts, topts);
+
+ bpf_prog_test_run_opts(ctx.prog_fd, &topts);
+}
+
+static void nop_setup(void)
+{
+ struct bpf_nop_bench *skel;
+ int err;
+
+ setup_libbpf();
+
+ skel = bpf_nop_bench__open();
+ if (!skel) {
+ fprintf(stderr, "failed to open skeleton\n");
+ exit(1);
+ }
+
+ err = bpf_nop_bench__load(skel);
+ if (err) {
+ fprintf(stderr, "failed to load skeleton: %s\n", strerror(-err));
+ bpf_nop_bench__destroy(skel);
+ exit(1);
+ }
+
+ ctx.skel = skel;
+ ctx.prog_fd = bpf_program__fd(skel->progs.bench_nop);
+
+ BENCH_TIMING_INIT(&ctx.timing, skel, 0);
+ bpf_bench_calibrate(&ctx.timing, nop_run_once, NULL);
+
+ env.duration_sec = 600;
+}
+
+static void *nop_producer(void *input)
+{
+ while (true)
+ nop_run_once(NULL);
+
+ return NULL;
+}
+
+static void nop_measure(struct bench_res *res)
+{
+ bpf_bench_timing_measure(&ctx.timing, res);
+}
+
+static void nop_report_final(struct bench_res res[], int res_cnt)
+{
+ bpf_bench_timing_report(&ctx.timing, "bpf-nop", NULL);
+}
+
+const struct bench bench_bpf_nop = {
+ .name = "bpf-nop",
+ .validate = nop_validate,
+ .setup = nop_setup,
+ .producer_thread = nop_producer,
+ .measure = nop_measure,
+ .report_final = nop_report_final,
+};
diff --git a/tools/testing/selftests/bpf/progs/bpf_nop_bench.c b/tools/testing/selftests/bpf/progs/bpf_nop_bench.c
new file mode 100644
index 000000000000..01ed284c1bb3
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/bpf_nop_bench.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Meta Platforms, Inc. and affiliates. */
+
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include "bench_bpf_timing.bpf.h"
+
+SEC("syscall")
+int bench_nop(void *ctx)
+{
+ return BENCH_BPF_LOOP(0, ({}));
+}
+
+char _license[] SEC("license") = "GPL";
--
2.52.0
next prev parent reply other threads:[~2026-04-27 23:23 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-27 23:22 [PATCH bpf-next 0/7] selftests/bpf: Add XDP load-balancer benchmark Puranjay Mohan
2026-04-27 23:22 ` [PATCH bpf-next 1/7] selftests/bpf: Add bench_force_done() for early benchmark completion Puranjay Mohan
2026-04-27 23:39 ` sashiko-bot
2026-04-28 0:05 ` bot+bpf-ci
2026-04-28 9:15 ` Puranjay Mohan
2026-04-27 23:22 ` [PATCH bpf-next 2/7] selftests/bpf: Add BPF batch-timing library Puranjay Mohan
2026-04-28 0:12 ` sashiko-bot
2026-04-28 0:18 ` bot+bpf-ci
2026-04-28 9:23 ` Puranjay Mohan
2026-04-27 23:23 ` Puranjay Mohan [this message]
2026-04-27 23:23 ` [PATCH bpf-next 4/7] selftests/bpf: Add XDP load-balancer common definitions Puranjay Mohan
2026-04-28 0:05 ` bot+bpf-ci
2026-04-28 0:38 ` sashiko-bot
2026-04-28 9:29 ` Puranjay Mohan
2026-04-27 23:23 ` [PATCH bpf-next 5/7] selftests/bpf: Add XDP load-balancer BPF program Puranjay Mohan
2026-04-28 0:18 ` bot+bpf-ci
2026-04-28 1:05 ` sashiko-bot
2026-04-28 9:30 ` Puranjay Mohan
2026-04-27 23:23 ` [PATCH bpf-next 6/7] selftests/bpf: Add XDP load-balancer benchmark driver Puranjay Mohan
2026-04-28 0:05 ` bot+bpf-ci
2026-04-28 1:29 ` sashiko-bot
2026-04-28 9:33 ` Puranjay Mohan
2026-04-27 23:23 ` [PATCH bpf-next 7/7] selftests/bpf: Add XDP load-balancer benchmark run script Puranjay Mohan
2026-04-28 2:03 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260427232313.1582588-4-puranjay@kernel.org \
--to=puranjay@kernel.org \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=eddyz87@gmail.com \
--cc=feichen@meta.com \
--cc=kernel-team@meta.com \
--cc=martin.lau@kernel.org \
--cc=memxor@gmail.com \
--cc=mykyta.yatsenko5@gmail.com \
--cc=ndixit@meta.com \
--cc=puranjay12@gmail.com \
--cc=taragrawal@meta.com \
--cc=tehnerd@tehnerd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox