[PATCH 0/2] bpf: htab: Reduce memory use of hash maps

["T.J. Mercier" <tjmercier@google.com>]

Memory is expensive and scarce these days. This series reduces the
memory use of BPF hash maps by eliminating the per-element overheads
below. This saves up to 50% of per-element memory use for standard and
PCPU hash maps. The memory use of LRU hash maps is unaffected.

Map Type & Configuration            | Old size | New size | Savings
------------------------------------|----------|----------|--------
Standard (key <= 8 B, val <= 8 B)   |   64 B   |   32 B   | 50.0%
Per-CPU (prealloc) (key <= 8 B)     |   64 B   |   32 B   | 50.0%
Per-CPU (non-prealloc) (key <= 8 B) |   64 B   |   40 B   | 37.5%
LRU (Any key/value size)            |    -     |    -     | 00.0%

1) Unused LRU / PCPU fields in standard and PCPU hash maps (patch 1)
struct htab_elem is used for all hash map types, and includes fields
that are not always used (bpf_lru_node, ptr_to_pptr). For standard
(non-LRU, non-PCPU) hash maps the 24 bytes for the bpf_lru_node (union)
are entirely overhead and can be eliminated. Non-preallocated PCPU maps
only need the 8 byte ptr_to_pptr which is currently unioned with the
unneeded 24 byte bpf_lru_node, so 16 bytes of overhead can be
eliminated. Preallocated PCPU maps don't need ptr_to_pptr, so 24 bytes
of overhead can be saved.

2) Hash caching for small keys (patch 2)
For hash maps with small key sizes (<= 8 bytes), comparing keys only
requires a single instruction (64 bit), or a few (32 bit). Currently the
4 byte hash value (8 byte aligned) is used for this, but offers no
performance advantage in this case and can be eliminated.

The implementation splits htab_elem into dedicated structures for the
different map types (htab_elem_lru, htab_elem_pcpu, htab_elem) which
share a common initial sequence, but contain additional map-type
specific fields where necessary. This means the placement of the key for
each element varies with the map type, and key_offset is added to
bpf_htab for this purpose.

While using key_offset and conditional hash checks adds new pointer
dereferences and branching during element traversal,
run_bench_htab_mem.sh shows no significant performance regression across
10 runs on my 3995WX.

Benchmark (all in kops/sec)  | Avg. Before | StDev | Avg. After | StDev
-----------------------------|-------------|-------|------------|------
prealloc overwrite           | 115.11      | 4.10  | 115.45     | 5.24
prealloc batch_add_batch_del | 127.14      | 4.32  | 127.06     | 2.32
prealloc add_del_on_diff_cpu | 23.22       | 0.93  | 22.91      | 1.60
normal overwrite             | 78.52       | 3.05  | 80.40      | 3.25
normal batch_add_batch_del   | 45.37       | 0.69  | 47.71      | 0.66
normal add_del_on_diff_cpu   | 12.02       | 0.73  | 12.48      | 0.70

T.J. Mercier (2):
  bpf: htab: Split htab_elem_lru and htab_elem_pcpu off of htab_elem
  bpf: htab: Reduce elem_size by 8 bytes for small key sizes

 kernel/bpf/hashtab.c                          | 339 ++++++++++++------
 kernel/bpf/map_in_map.c                       |  13 +
 kernel/bpf/map_in_map.h                       |   2 +
 .../selftests/bpf/progs/map_ptr_kern.c        |   2 +-
 4 files changed, 252 insertions(+), 104 deletions(-)


base-commit: cfce77b63375dac81d53f2f85593c548415206b7
-- 
2.55.0.229.g6434b31f56-goog