BPF List
 help / color / mirror / Atom feed
From: Yonghong Song <yonghong.song@linux.dev>
To: bpf@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>,
	Andrii Nakryiko <andrii@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Eduard Zingerman <eddyz87@gmail.com>,
	kernel-team@fb.com
Subject: [PATCH bpf-next v3 12/13] selftests/bpf: Add tests for callbacks returning more than 8 bytes
Date: Sat,  8 Aug 2026 12:04:23 -0700	[thread overview]
Message-ID: <20260808190423.1903543-1-yonghong.song@linux.dev> (raw)
In-Reply-To: <20260808190322.1896580-1-yonghong.song@linux.dev>

Add two __failure tests covering the callback return-size checks:

 - timer_ret_pair_fail: a bpf_timer callback declared to return more than
   8 bytes, rejected by check_ld_imm() where the callback's PTR_TO_FUNC is
   created, with "callback function with >8-byte return value is not
   supported".

 - exceptions_ret_pair_fail: an exception callback declared to return more
   than 8 bytes, rejected by do_check_common() when the callback
   subprogram is verified, with "exception cb cannot return value larger
   than 8 bytes".

Both callback bodies are written in inline asm so that the tests do not
depend on LLVM 23 R0:R2 codegen and run on any compiler. The verifier reads
the return type from BTF rather than from the instructions, so the >8 byte
return prototype is supplied through __btf_func_path(), pointing at a
companion btf__*.c program that exists only to carry that BTF.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
---
 .../selftests/bpf/prog_tests/exceptions.c     |  2 +
 .../testing/selftests/bpf/prog_tests/timer.c  |  2 +
 .../bpf/progs/btf__exceptions_ret_pair_fail.c | 10 ++++
 .../bpf/progs/btf__timer_ret_pair_fail.c      | 10 ++++
 .../bpf/progs/exceptions_ret_pair_fail.c      | 30 ++++++++++++
 .../selftests/bpf/progs/timer_ret_pair_fail.c | 49 +++++++++++++++++++
 6 files changed, 103 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/progs/btf__exceptions_ret_pair_fail.c
 create mode 100644 tools/testing/selftests/bpf/progs/btf__timer_ret_pair_fail.c
 create mode 100644 tools/testing/selftests/bpf/progs/exceptions_ret_pair_fail.c
 create mode 100644 tools/testing/selftests/bpf/progs/timer_ret_pair_fail.c

diff --git a/tools/testing/selftests/bpf/prog_tests/exceptions.c b/tools/testing/selftests/bpf/prog_tests/exceptions.c
index 3588d6f97fd4..71d00c568d80 100644
--- a/tools/testing/selftests/bpf/prog_tests/exceptions.c
+++ b/tools/testing/selftests/bpf/prog_tests/exceptions.c
@@ -5,6 +5,7 @@
 #include "exceptions.skel.h"
 #include "exceptions_ext.skel.h"
 #include "exceptions_fail.skel.h"
+#include "exceptions_ret_pair_fail.skel.h"
 #include "exceptions_assert.skel.h"
 
 static char log_buf[1024 * 1024];
@@ -12,6 +13,7 @@ static char log_buf[1024 * 1024];
 static void test_exceptions_failure(void)
 {
 	RUN_TESTS(exceptions_fail);
+	RUN_TESTS(exceptions_ret_pair_fail);
 }
 
 static void test_exceptions_success(void)
diff --git a/tools/testing/selftests/bpf/prog_tests/timer.c b/tools/testing/selftests/bpf/prog_tests/timer.c
index 09ff21e1ad2f..593e56d8964e 100644
--- a/tools/testing/selftests/bpf/prog_tests/timer.c
+++ b/tools/testing/selftests/bpf/prog_tests/timer.c
@@ -6,6 +6,7 @@
 #include <sys/syscall.h>
 #include "timer.skel.h"
 #include "timer_failure.skel.h"
+#include "timer_ret_pair_fail.skel.h"
 #include "timer_interrupt.skel.h"
 
 #define NUM_THR 8
@@ -285,6 +286,7 @@ void serial_test_timer(void)
 	test_timer(timer);
 
 	RUN_TESTS(timer_failure);
+	RUN_TESTS(timer_ret_pair_fail);
 }
 
 void serial_test_timer_stress(void)
diff --git a/tools/testing/selftests/bpf/progs/btf__exceptions_ret_pair_fail.c b/tools/testing/selftests/bpf/progs/btf__exceptions_ret_pair_fail.c
new file mode 100644
index 000000000000..a45db5d9c1d4
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/btf__exceptions_ret_pair_fail.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Meta Platforms, Inc. and affiliates. */
+#include <vmlinux.h>
+#include <bpf/bpf_helpers.h>
+
+unsigned __int128 exception_cb_bad_ret_type3(u64 cookie)
+{
+	for (;;)
+		;
+}
diff --git a/tools/testing/selftests/bpf/progs/btf__timer_ret_pair_fail.c b/tools/testing/selftests/bpf/progs/btf__timer_ret_pair_fail.c
new file mode 100644
index 000000000000..35506c7c5a91
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/btf__timer_ret_pair_fail.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Meta Platforms, Inc. and affiliates. */
+#include <vmlinux.h>
+#include <bpf/bpf_helpers.h>
+
+unsigned __int128 timer_cb_ret_pair(void *map, int *key, struct bpf_timer *timer)
+{
+	for (;;)
+		;
+}
diff --git a/tools/testing/selftests/bpf/progs/exceptions_ret_pair_fail.c b/tools/testing/selftests/bpf/progs/exceptions_ret_pair_fail.c
new file mode 100644
index 000000000000..842f86ad8659
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/exceptions_ret_pair_fail.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Meta Platforms, Inc. and affiliates. */
+#include <vmlinux.h>
+#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_helpers.h>
+
+#include "bpf_misc.h"
+#include "bpf_experimental.h"
+
+__naked __noinline __used
+unsigned __int128 exception_cb_bad_ret_type3(u64 cookie)
+{
+	asm volatile (
+	"r0 = r1;"
+	"r2 = 0;"
+	"exit;"
+	::: __clobber_all);
+}
+
+SEC("?tc")
+__exception_cb(exception_cb_bad_ret_type3)
+__failure __msg("exception cb cannot return value larger than 8 bytes")
+__btf_func_path("btf__exceptions_ret_pair_fail.bpf.o")
+int reject_exception_cb_ret_pair(void *ctx)
+{
+	bpf_throw(0);
+	return 0;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/timer_ret_pair_fail.c b/tools/testing/selftests/bpf/progs/timer_ret_pair_fail.c
new file mode 100644
index 000000000000..29fd294dfd49
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/timer_ret_pair_fail.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2026 Meta Platforms, Inc. and affiliates. */
+
+#include <linux/bpf.h>
+#include <time.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+
+char _license[] SEC("license") = "GPL";
+
+struct elem {
+	struct bpf_timer t;
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(max_entries, 1);
+	__type(key, int);
+	__type(value, struct elem);
+} timer_map SEC(".maps");
+
+__naked __noinline __used
+static unsigned __int128 timer_cb_ret_pair(void *map, int *key, struct bpf_timer *timer)
+{
+	asm volatile (
+		"r0 = 0;"
+		"r2 = 0;"
+		"exit;"
+		::: __clobber_all
+	);
+}
+
+SEC("fentry/bpf_fentry_test1")
+__failure __msg("callback function with >8-byte return value is not supported")
+__btf_func_path("btf__timer_ret_pair_fail.bpf.o")
+long BPF_PROG2(test_bad_ret_pair, int, a)
+{
+	int key = 0;
+	struct bpf_timer *timer;
+
+	timer = bpf_map_lookup_elem(&timer_map, &key);
+	if (timer) {
+		bpf_timer_init(timer, &timer_map, CLOCK_BOOTTIME);
+		bpf_timer_set_callback(timer, timer_cb_ret_pair);
+	}
+
+	return 0;
+}
-- 
2.53.0-Meta


  parent reply	other threads:[~2026-08-08 19:04 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-08 19:03 [PATCH bpf-next v3 00/13] bpf: Support aggregate return values up to 16 bytes Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 01/13] bpf: Factor check_global_ret_scalar_reg() out of the global return check Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 02/13] bpf: Add helpers to describe the R0:R2 return register pair Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 03/13] bpf: Wire up JIT support for 16-byte kfunc returns Yonghong Song
2026-08-08 19:39   ` sashiko-bot
2026-08-10 16:29     ` Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 04/13] bpf: Track R2 of register-pair returns in precision backtracking Yonghong Song
2026-08-08 19:29   ` sashiko-bot
2026-08-10 16:30     ` Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 05/13] bpf: Account R2 of register-pair returns in live register analysis Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 06/13] bpf: Reject callbacks returning more than 8 bytes Yonghong Song
2026-08-08 19:45   ` sashiko-bot
2026-08-10 16:36     ` Yonghong Song
2026-08-08 19:03 ` [PATCH bpf-next v3 07/13] bpf: Add verifier support for 16-byte returns in R0:R2 Yonghong Song
2026-08-08 19:41   ` sashiko-bot
2026-08-10 16:44     ` Yonghong Song
2026-08-08 19:04 ` [PATCH bpf-next v3 08/13] bpf: Reject register-pair returns when the subprog BTF is unreliable Yonghong Song
2026-08-08 19:04 ` [PATCH bpf-next v3 09/13] bpf: Enable aggregate return types up to 16 bytes Yonghong Song
2026-08-08 19:04 ` [PATCH bpf-next v3 10/13] selftests/bpf: Add C tests for 16-byte returns in R0:R2 Yonghong Song
2026-08-08 19:27   ` sashiko-bot
2026-08-10 16:51     ` Yonghong Song
2026-08-08 19:04 ` [PATCH bpf-next v3 11/13] selftests/bpf: Add inline-asm and subprog tests for R0:R2 returns Yonghong Song
2026-08-08 19:04 ` Yonghong Song [this message]
2026-08-08 19:04 ` [PATCH bpf-next v3 13/13] Documentation/bpf: Document up to 16-byte kfunc return values in R0:R2 Yonghong Song

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260808190423.1903543-1-yonghong.song@linux.dev \
    --to=yonghong.song@linux.dev \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=eddyz87@gmail.com \
    --cc=kernel-team@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox