From: Jiri Olsa <jolsa@kernel.org>
To: Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>,
Masami Hiramatsu <mhiramat@kernel.org>,
Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org, rtm@csail.mit.edu, bpf@vger.kernel.org,
x86@kernel.org, linux-riscv@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-trace-kernel@vger.kernel.org,
Martin KaFai Lau <martin.lau@linux.dev>,
Eduard Zingerman <eddyz87@gmail.com>, Song Liu <song@kernel.org>,
Yonghong Song <yonghong.song@linux.dev>,
Will Deacon <will@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Peter Zijlstra <peterz@infradead.org>
Subject: [PATCH bpf 1/2] bpf: Restrict uprobe ctx writes to the registers ptrace can set
Date: Wed, 18 Nov 2026 09:44:49 +0100 [thread overview]
Message-ID: <20261118084451.12590-2-jolsa@kernel.org> (raw)
In-Reply-To: <20261118084451.12590-1-jolsa@kernel.org>
Since commit 7384893d970e ("bpf: Allow uprobe program to change context
registers") a uprobe program can write any field of struct pt_regs.
Some of those fields are not plain user registers. The exit to user
space loads them into the CPU:
arch field exit path ptrace
------ ------ ------------------------------- ------------------
riscv status csrw CSR_STATUS, a0 not in the regset
arm64 pstate msr spsr_el1, x22 valid_user_regs()
x86-64 cs, ss (cs & 3) == 0: iretq to ring 0 set_segment_reg()
x86-64 flags iretq loads IF and IOPL set_flags()
On riscv a program that sets sstatus.SPP in pt_regs.status makes
ret_from_exception return to user code in supervisor mode. On x86-64 a
program that writes a kernel selector to cs makes iretq return to
ring 0.
ptrace guards these fields, but the bpf verifier does not.
Add arch_uprobe_regs_writable(). Each arch lists the registers that
ptrace can set to any value, and kprobe_prog_is_valid_access() rejects
writes to any other offset when the program is loaded:
arm64: x0 to x30, sp, pc
riscv: epc, ra to t6
x86-64: r15 to di, ip, sp
The default is no writes, so arches without a list (and 32-bit x86)
lose ctx writes for uprobe programs. Reads are not affected.
flags on x86-64 and pstate on arm64 become read-only, including the
condition bits that ptrace would let a debugger change. orig_ax is
read-only too.
Kprobe programs that write ctx were already rejected when they were
attached. Those that write one of these fields now fail to load.
Fixes: 7384893d970e ("bpf: Allow uprobe program to change context registers")
Cc: stable@vger.kernel.org
Reported-by: rtm@csail.mit.edu
Closes: https://lore.kernel.org/bpf/30318.1794850523@30-11-166.wireless.csail.mit.edu/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
arch/arm64/kernel/probes/uprobes.c | 6 ++++++
arch/riscv/kernel/probes/uprobes.c | 6 ++++++
arch/x86/kernel/uprobes.c | 15 +++++++++++++++
include/linux/uprobes.h | 5 +++++
kernel/events/uprobes.c | 9 +++++++++
kernel/trace/bpf_trace.c | 10 +++++++++-
6 files changed, 50 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c
index 2a9b0bc083a3..1e6ac4785a53 100644
--- a/arch/arm64/kernel/probes/uprobes.c
+++ b/arch/arm64/kernel/probes/uprobes.c
@@ -152,6 +152,12 @@ bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
return regs->sp < ret->stack;
}
+bool arch_uprobe_regs_writable(int off, int size)
+{
+ /* From x0 to x30, sp, pc. */
+ return off + size <= offsetof(struct pt_regs, pstate);
+}
+
unsigned long
arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
struct pt_regs *regs)
diff --git a/arch/riscv/kernel/probes/uprobes.c b/arch/riscv/kernel/probes/uprobes.c
index eb177d0ce8ab..dbb153463197 100644
--- a/arch/riscv/kernel/probes/uprobes.c
+++ b/arch/riscv/kernel/probes/uprobes.c
@@ -126,6 +126,12 @@ bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
return regs->sp < ret->stack;
}
+bool arch_uprobe_regs_writable(int off, int size)
+{
+ /* epc, from ra to t6. */
+ return off + size <= offsetof(struct pt_regs, status);
+}
+
unsigned long
arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
struct pt_regs *regs)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 0f60c0d076b6..fc07bcd0f462 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -1888,6 +1888,21 @@ bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
return regs->sp <= ret->stack;
}
+bool arch_uprobe_regs_writable(int off, int size)
+{
+ int end = off + size;
+
+ /* The 32-bit pt_regs has segments in front of orig_ax. */
+ if (!IS_ENABLED(CONFIG_X86_64))
+ return false;
+ /* From r15 to di. Not orig_ax, cs, flags, ss. */
+ if (end <= offsetof(struct pt_regs, orig_ax))
+ return true;
+ if (off >= offsetof(struct pt_regs, ip) && end <= offsetofend(struct pt_regs, ip))
+ return true;
+ return off >= offsetof(struct pt_regs, sp) && end <= offsetofend(struct pt_regs, sp);
+}
+
/*
* Heuristic-based check if uprobe is installed at the function entry.
*
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index d34dbc0fbbfe..43b250bff162 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -239,6 +239,7 @@ extern void uprobe_copy_from_page(struct page *page, unsigned long vaddr, void *
extern void handle_syscall_uprobe(struct pt_regs *regs, unsigned long bp_vaddr);
extern void arch_uprobe_optimize(struct arch_uprobe *auprobe, unsigned long vaddr);
extern unsigned long arch_uprobe_get_xol_area(void);
+extern bool arch_uprobe_regs_writable(int off, int size);
#else /* !CONFIG_UPROBES */
struct uprobes_state {
};
@@ -300,5 +301,9 @@ static inline void uprobe_copy_process(struct task_struct *t, u64 flags)
static inline void uprobe_clear_state(struct mm_struct *mm)
{
}
+static inline bool arch_uprobe_regs_writable(int off, int size)
+{
+ return false;
+}
#endif /* !CONFIG_UPROBES */
#endif /* _LINUX_UPROBES_H */
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index caf444762a27..c47b1ee266d5 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -2703,6 +2703,15 @@ void __weak arch_uprobe_optimize(struct arch_uprobe *auprobe, unsigned long vadd
{
}
+/*
+ * Can a bpf prog write these bytes of pt_regs? An arch opts in and lists the
+ * registers that ptrace can set to any value.
+ */
+bool __weak arch_uprobe_regs_writable(int off, int size)
+{
+ return false;
+}
+
/*
* Run handler and ask thread to singlestep.
* Ensure all non-fatal signals cannot interrupt thread while it singlesteps.
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 2aec56d7f3d3..636c9849e07f 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -1397,8 +1397,16 @@ static bool kprobe_prog_is_valid_access(int off, int size, enum bpf_access_type
if (off + size > sizeof(struct pt_regs))
return false;
- if (type == BPF_WRITE)
+ if (type == BPF_WRITE) {
+ /*
+ * pt_regs also holds what the kernel restores on the way to
+ * user space: cs and flags on x86, pstate on arm64, status on
+ * riscv. A prog can write the registers of the task only.
+ */
+ if (!arch_uprobe_regs_writable(off, size))
+ return false;
prog->aux->kprobe_write_ctx = true;
+ }
return true;
}
--
2.43.0
next prev parent reply other threads:[~2026-11-18 8:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 8:44 [PATCH bpf 0/2] bpf: Limit writable registers in uprobe context Jiri Olsa
2026-11-18 8:44 ` Jiri Olsa [this message]
2026-11-18 8:44 ` [PATCH bpf 2/2] selftests/bpf: Test which ctx registers a uprobe prog can write Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118084451.12590-2-jolsa@kernel.org \
--to=jolsa@kernel.org \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=eddyz87@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=martin.lau@linux.dev \
--cc=mhiramat@kernel.org \
--cc=oleg@redhat.com \
--cc=palmer@dabbelt.com \
--cc=peterz@infradead.org \
--cc=rtm@csail.mit.edu \
--cc=song@kernel.org \
--cc=stable@vger.kernel.org \
--cc=will@kernel.org \
--cc=x86@kernel.org \
--cc=yonghong.song@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox