From: sdf@google.com
To: Wang Yufen <wangyufen@huawei.com>
Cc: bpf@vger.kernel.org, andrii@kernel.org, mykolal@fb.com,
martin.lau@linux.dev, ast@kernel.org, deso@posteo.net
Subject: Re: [bpf-next] selftests/bpf: fix missing BPF object files
Date: Thu, 20 Oct 2022 11:07:56 -0700 [thread overview]
Message-ID: <Y1GOfIXzOt61uMo9@google.com> (raw)
In-Reply-To: <1666235134-562-1-git-send-email-wangyufen@huawei.com>
On 10/20, Wang Yufen wrote:
> After commit afef88e65554 ("selftests/bpf: Store BPF object files with
> .bpf.o extension"), we should use *.bpf.o instead of *.o.
> In addition, use the BPF_FILE variable to save the BPF object file name,
> which can be better identified and modified.
> Fixes: afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o
> extension")
> Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
I wish these were a part of test_progs to be exercised by the CI :-(
> ---
> tools/testing/selftests/bpf/test_bpftool_metadata.sh | 7 +++++--
> tools/testing/selftests/bpf/test_flow_dissector.sh | 6 ++++--
> tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 17
> +++++++++--------
> tools/testing/selftests/bpf/test_lwt_seg6local.sh | 9 +++++----
> tools/testing/selftests/bpf/test_tc_edt.sh | 3 ++-
> tools/testing/selftests/bpf/test_tc_tunnel.sh | 5 +++--
> tools/testing/selftests/bpf/test_tunnel.sh | 5 +++--
> tools/testing/selftests/bpf/test_xdp_meta.sh | 9 +++++----
> tools/testing/selftests/bpf/test_xdp_vlan.sh | 8 ++++----
> 9 files changed, 40 insertions(+), 29 deletions(-)
> diff --git a/tools/testing/selftests/bpf/test_bpftool_metadata.sh
> b/tools/testing/selftests/bpf/test_bpftool_metadata.sh
> index 1bf81b4..b552069 100755
> --- a/tools/testing/selftests/bpf/test_bpftool_metadata.sh
> +++ b/tools/testing/selftests/bpf/test_bpftool_metadata.sh
> @@ -4,6 +4,9 @@
> # Kselftest framework requirement - SKIP code is 4.
> ksft_skip=4
> +BPF_FILE_USED="metadata_used.bpf.o"
> +BPF_FILE_UNUSED="metadata_unused.bpf.o"
> +
> TESTNAME=bpftool_metadata
> BPF_FS=$(awk '$3 == "bpf" {print $2; exit}' /proc/mounts)
> BPF_DIR=$BPF_FS/test_$TESTNAME
> @@ -55,7 +58,7 @@ mkdir $BPF_DIR
> trap cleanup EXIT
> -bpftool prog load metadata_unused.o $BPF_DIR/unused
> +bpftool prog load $BPF_FILE_UNUSED $BPF_DIR/unused
> METADATA_PLAIN="$(bpftool prog)"
> echo "$METADATA_PLAIN" | grep 'a = "foo"' > /dev/null
> @@ -67,7 +70,7 @@ bpftool map | grep 'metadata.rodata' > /dev/null
> rm $BPF_DIR/unused
> -bpftool prog load metadata_used.o $BPF_DIR/used
> +bpftool prog load $BPF_FILE_USED $BPF_DIR/used
> METADATA_PLAIN="$(bpftool prog)"
> echo "$METADATA_PLAIN" | grep 'a = "bar"' > /dev/null
> diff --git a/tools/testing/selftests/bpf/test_flow_dissector.sh
> b/tools/testing/selftests/bpf/test_flow_dissector.sh
> index 5303ce0..4b298863 100755
> --- a/tools/testing/selftests/bpf/test_flow_dissector.sh
> +++ b/tools/testing/selftests/bpf/test_flow_dissector.sh
> @@ -2,6 +2,8 @@
> # SPDX-License-Identifier: GPL-2.0
> #
> # Load BPF flow dissector and verify it correctly dissects traffic
> +
> +BPF_FILE="bpf_flow.bpf.o"
> export TESTNAME=test_flow_dissector
> unmount=0
> @@ -22,7 +24,7 @@ if [[ -z $(ip netns identify $$) ]]; then
> if bpftool="$(which bpftool)"; then
> echo "Testing global flow dissector..."
> - $bpftool prog loadall ./bpf_flow.o /sys/fs/bpf/flow \
> + $bpftool prog loadall $BPF_FILE /sys/fs/bpf/flow \
> type flow_dissector
> if ! unshare --net $bpftool prog attach pinned \
> @@ -95,7 +97,7 @@ else
> fi
> # Attach BPF program
> -./flow_dissector_load -p bpf_flow.o -s _dissect
> +./flow_dissector_load -p $BPF_FILE -s _dissect
> # Setup
> tc qdisc add dev lo ingress
> diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
> b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
> index 6c69c42..1e565f4 100755
> --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
> +++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
> @@ -38,6 +38,7 @@
> # ping: SRC->[encap at veth2:ingress]->GRE:decap->DST
> # ping replies go DST->SRC directly
> +BPF_FILE="test_lwt_ip_encap.bpf.o"
> if [[ $EUID -ne 0 ]]; then
> echo "This script must be run as root"
> echo "FAIL"
> @@ -373,14 +374,14 @@ test_egress()
> # install replacement routes (LWT/eBPF), pings succeed
> if [ "${ENCAP}" == "IPv4" ] ; then
> ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \
> - test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF}
> + ${BPF_FILE} sec encap_gre dev veth1 ${VRF}
> ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \
> - test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF}
> + ${BPF_FILE} sec encap_gre dev veth1 ${VRF}
> elif [ "${ENCAP}" == "IPv6" ] ; then
> ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \
> - test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF}
> + ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF}
> ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \
> - test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF}
> + ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF}
> else
> echo " unknown encap ${ENCAP}"
> TEST_STATUS=1
> @@ -431,14 +432,14 @@ test_ingress()
> # install replacement routes (LWT/eBPF), pings succeed
> if [ "${ENCAP}" == "IPv4" ] ; then
> ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \
> - test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF}
> + ${BPF_FILE} sec encap_gre dev veth2 ${VRF}
> ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \
> - test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF}
> + ${BPF_FILE} sec encap_gre dev veth2 ${VRF}
> elif [ "${ENCAP}" == "IPv6" ] ; then
> ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \
> - test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF}
> + ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF}
> ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \
> - test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF}
> + ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF}
> else
> echo "FAIL: unknown encap ${ENCAP}"
> TEST_STATUS=1
> diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh
> b/tools/testing/selftests/bpf/test_lwt_seg6local.sh
> index 826f4423..0efea22 100755
> --- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh
> +++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh
> @@ -23,6 +23,7 @@
> # Kselftest framework requirement - SKIP code is 4.
> ksft_skip=4
> +BPF_FILE="test_lwt_seg6local.bpf.o"
> readonly NS1="ns1-$(mktemp -u XXXXXX)"
> readonly NS2="ns2-$(mktemp -u XXXXXX)"
> readonly NS3="ns3-$(mktemp -u XXXXXX)"
> @@ -117,18 +118,18 @@ ip netns exec ${NS6} ip -6 addr add fb00::109/16
> dev veth10 scope link
> ip netns exec ${NS1} ip -6 addr add fb00::1/16 dev lo
> ip netns exec ${NS1} ip -6 route add fb00::6 dev veth1 via fb00::21
> -ip netns exec ${NS2} ip -6 route add fb00::6 encap bpf in obj
> test_lwt_seg6local.o sec encap_srh dev veth2
> +ip netns exec ${NS2} ip -6 route add fb00::6 encap bpf in obj
> ${BPF_FILE} sec encap_srh dev veth2
> ip netns exec ${NS2} ip -6 route add fd00::1 dev veth3 via fb00::43
> scope link
> ip netns exec ${NS3} ip -6 route add fc42::1 dev veth5 via fb00::65
> -ip netns exec ${NS3} ip -6 route add fd00::1 encap seg6local action
> End.BPF endpoint obj test_lwt_seg6local.o sec add_egr_x dev veth4
> +ip netns exec ${NS3} ip -6 route add fd00::1 encap seg6local action
> End.BPF endpoint obj ${BPF_FILE} sec add_egr_x dev veth4
> -ip netns exec ${NS4} ip -6 route add fd00::2 encap seg6local action
> End.BPF endpoint obj test_lwt_seg6local.o sec pop_egr dev veth6
> +ip netns exec ${NS4} ip -6 route add fd00::2 encap seg6local action
> End.BPF endpoint obj ${BPF_FILE} sec pop_egr dev veth6
> ip netns exec ${NS4} ip -6 addr add fc42::1 dev lo
> ip netns exec ${NS4} ip -6 route add fd00::3 dev veth7 via fb00::87
> ip netns exec ${NS5} ip -6 route add fd00::4 table 117 dev veth9 via
> fb00::109
> -ip netns exec ${NS5} ip -6 route add fd00::3 encap seg6local action
> End.BPF endpoint obj test_lwt_seg6local.o sec inspect_t dev veth8
> +ip netns exec ${NS5} ip -6 route add fd00::3 encap seg6local action
> End.BPF endpoint obj ${BPF_FILE} sec inspect_t dev veth8
> ip netns exec ${NS6} ip -6 addr add fb00::6/16 dev lo
> ip netns exec ${NS6} ip -6 addr add fd00::4/16 dev lo
> diff --git a/tools/testing/selftests/bpf/test_tc_edt.sh
> b/tools/testing/selftests/bpf/test_tc_edt.sh
> index daa7d1b..76f0bd1 100755
> --- a/tools/testing/selftests/bpf/test_tc_edt.sh
> +++ b/tools/testing/selftests/bpf/test_tc_edt.sh
> @@ -5,6 +5,7 @@
> # with dst port = 9000 down to 5MBps. Then it measures actual
> # throughput of the flow.
> +BPF_FILE="test_tc_edt.bpf.o"
> if [[ $EUID -ne 0 ]]; then
> echo "This script must be run as root"
> echo "FAIL"
> @@ -54,7 +55,7 @@ ip -netns ${NS_DST} route add ${IP_SRC}/32 dev veth_dst
> ip netns exec ${NS_SRC} tc qdisc add dev veth_src root fq
> ip netns exec ${NS_SRC} tc qdisc add dev veth_src clsact
> ip netns exec ${NS_SRC} tc filter add dev veth_src egress \
> - bpf da obj test_tc_edt.o sec cls_test
> + bpf da obj ${BPF_FILE} sec cls_test
> # start the listener
> diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh
> b/tools/testing/selftests/bpf/test_tc_tunnel.sh
> index 088fcad..334bdfe 100755
> --- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
> +++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
> @@ -3,6 +3,7 @@
> #
> # In-place tunneling
> +BPF_FILE="test_tc_tunnel.bpf.o"
> # must match the port that the bpf program filters on
> readonly port=8000
> @@ -196,7 +197,7 @@ verify_data
> # client can no longer connect
> ip netns exec "${ns1}" tc qdisc add dev veth1 clsact
> ip netns exec "${ns1}" tc filter add dev veth1 egress \
> - bpf direct-action object-file ./test_tc_tunnel.o \
> + bpf direct-action object-file ${BPF_FILE} \
> section "encap_${tuntype}_${mac}"
> echo "test bpf encap without decap (expect failure)"
> server_listen
> @@ -296,7 +297,7 @@ fi
> ip netns exec "${ns2}" ip link del dev testtun0
> ip netns exec "${ns2}" tc qdisc add dev veth2 clsact
> ip netns exec "${ns2}" tc filter add dev veth2 ingress \
> - bpf direct-action object-file ./test_tc_tunnel.o section decap
> + bpf direct-action object-file ${BPF_FILE} section decap
> echo "test bpf encap with bpf decap"
> client_connect
> verify_data
> diff --git a/tools/testing/selftests/bpf/test_tunnel.sh
> b/tools/testing/selftests/bpf/test_tunnel.sh
> index e9ebc67..2eaedc1 100755
> --- a/tools/testing/selftests/bpf/test_tunnel.sh
> +++ b/tools/testing/selftests/bpf/test_tunnel.sh
> @@ -45,6 +45,7 @@
> # 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
> # 6) Forward the packet to the overlay tnl dev
> +BPF_FILE="test_tunnel_kern.bpf.o"
> BPF_PIN_TUNNEL_DIR="/sys/fs/bpf/tc/tunnel"
> PING_ARG="-c 3 -w 10 -q"
> ret=0
> @@ -545,7 +546,7 @@ test_xfrm_tunnel()
> > /sys/kernel/debug/tracing/trace
> setup_xfrm_tunnel
> mkdir -p ${BPF_PIN_TUNNEL_DIR}
> - bpftool prog loadall ./test_tunnel_kern.o ${BPF_PIN_TUNNEL_DIR}
> + bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR}
> tc qdisc add dev veth1 clsact
> tc filter add dev veth1 proto ip ingress bpf da object-pinned \
> ${BPF_PIN_TUNNEL_DIR}/xfrm_get_state
> @@ -572,7 +573,7 @@ attach_bpf()
> SET=$2
> GET=$3
> mkdir -p ${BPF_PIN_TUNNEL_DIR}
> - bpftool prog loadall ./test_tunnel_kern.o ${BPF_PIN_TUNNEL_DIR}/
> + bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR}/
> tc qdisc add dev $DEV clsact
> tc filter add dev $DEV egress bpf da object-pinned
> ${BPF_PIN_TUNNEL_DIR}/$SET
> tc filter add dev $DEV ingress bpf da object-pinned
> ${BPF_PIN_TUNNEL_DIR}/$GET
> diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh
> b/tools/testing/selftests/bpf/test_xdp_meta.sh
> index ea69370..2740322 100755
> --- a/tools/testing/selftests/bpf/test_xdp_meta.sh
> +++ b/tools/testing/selftests/bpf/test_xdp_meta.sh
> @@ -1,5 +1,6 @@
> #!/bin/sh
> +BPF_FILE="test_xdp_meta.bpf.o"
> # Kselftest framework requirement - SKIP code is 4.
> readonly KSFT_SKIP=4
> readonly NS1="ns1-$(mktemp -u XXXXXX)"
> @@ -42,11 +43,11 @@ ip netns exec ${NS2} ip addr add 10.1.1.22/24 dev
> veth2
> ip netns exec ${NS1} tc qdisc add dev veth1 clsact
> ip netns exec ${NS2} tc qdisc add dev veth2 clsact
> -ip netns exec ${NS1} tc filter add dev veth1 ingress bpf da obj
> test_xdp_meta.o sec t
> -ip netns exec ${NS2} tc filter add dev veth2 ingress bpf da obj
> test_xdp_meta.o sec t
> +ip netns exec ${NS1} tc filter add dev veth1 ingress bpf da obj
> ${BPF_FILE} sec t
> +ip netns exec ${NS2} tc filter add dev veth2 ingress bpf da obj
> ${BPF_FILE} sec t
> -ip netns exec ${NS1} ip link set dev veth1 xdp obj test_xdp_meta.o sec x
> -ip netns exec ${NS2} ip link set dev veth2 xdp obj test_xdp_meta.o sec x
> +ip netns exec ${NS1} ip link set dev veth1 xdp obj ${BPF_FILE} sec x
> +ip netns exec ${NS2} ip link set dev veth2 xdp obj ${BPF_FILE} sec x
> ip netns exec ${NS1} ip link set dev veth1 up
> ip netns exec ${NS2} ip link set dev veth2 up
> diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh
> b/tools/testing/selftests/bpf/test_xdp_vlan.sh
> index 810c407..fbcaa9f 100755
> --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh
> +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh
> @@ -200,11 +200,11 @@ ip netns exec ${NS2} sh -c 'ping -W 1 -c 1
> 100.64.41.1 || echo "Success: First p
> # ----------------------------------------------------------------------
> # In ns1: ingress use XDP to remove VLAN tags
> export DEVNS1=veth1
> -export FILE=test_xdp_vlan.o
> +export BPF_FILE=test_xdp_vlan.bpf.o
> # First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change"
> export XDP_PROG=xdp_vlan_change
> -ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $FILE section
> $XDP_PROG
> +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE
> section $XDP_PROG
> # In ns1: egress use TC to add back VLAN tag 4011
> # (del cmd)
> @@ -212,7 +212,7 @@ ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE
> object $FILE section $XDP_PRO
> #
> ip netns exec ${NS1} tc qdisc add dev $DEVNS1 clsact
> ip netns exec ${NS1} tc filter add dev $DEVNS1 egress \
> - prio 1 handle 1 bpf da obj $FILE sec tc_vlan_push
> + prio 1 handle 1 bpf da obj $BPF_FILE sec tc_vlan_push
> # Now the namespaces can reach each-other, test with ping:
> ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1
> @@ -226,7 +226,7 @@ ip netns exec ${NS1} ping -i 0.2 -W 2 -c 2 $IPADDR2
> #
> export XDP_PROG=xdp_vlan_remove_outer2
> ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE off
> -ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $FILE section
> $XDP_PROG
> +ip netns exec ${NS1} ip link set $DEVNS1 $XDP_MODE object $BPF_FILE
> section $XDP_PROG
> # Now the namespaces should still be able reach each-other, test with
> ping:
> ip netns exec ${NS2} ping -i 0.2 -W 2 -c 2 $IPADDR1
> --
> 1.8.3.1
next prev parent reply other threads:[~2022-10-20 18:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-20 3:05 [bpf-next] selftests/bpf: fix missing BPF object files Wang Yufen
2022-10-20 18:07 ` sdf [this message]
2022-10-21 2:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y1GOfIXzOt61uMo9@google.com \
--to=sdf@google.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=deso@posteo.net \
--cc=martin.lau@linux.dev \
--cc=mykolal@fb.com \
--cc=wangyufen@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox