[PATCH] selftests/bpf: Move test_lwt_ip_encap to test_progs

Bastien Curutchet (eBPF Foundation)
2025-03-04T09:25:02Z

test_lwt_ip_encap.sh isn't used by the BPF CI.

Add a new file in the test_progs framework to migrate the tests done by
test_lwt_ip_encap.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_ip_encap.c.
Rework the GSO part to avoid using nc and dd.

Remove test_lwt_ip_encap.sh and its Makefile entry.

Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
---
tools/testing/selftests/bpf/Makefile | 3 +-
.../selftests/bpf/prog_tests/lwt_ip_encap.c | 540 +++++++++++++++++++++
tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 476 ------------------
3 files changed, 541 insertions(+), 478 deletions(-)

diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index e6a02d5b87d123cef7e6b41bfbc96d34083f38e1..df4814b5200a5a0e732b19ab3a5975957fb7cbc9 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -95,7 +95,7 @@ TEST_GEN_PROGS += test_progs-cpuv4
TEST_INST_SUBDIRS += cpuv4
endif

-TEST_GEN_FILES = test_lwt_ip_encap.bpf.o test_tc_edt.bpf.o
+TEST_GEN_FILES = test_tc_edt.bpf.o
TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c)

# Order correspond to 'make run_tests' order
@@ -104,7 +104,6 @@ TEST_PROGS := test_kmod.sh \
test_lirc_mode2.sh \
test_xdp_vlan_mode_generic.sh \
test_xdp_vlan_mode_native.sh \
- test_lwt_ip_encap.sh \
test_tc_tunnel.sh \
test_tc_edt.sh \
test_xdping.sh \
diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c
new file mode 100644
index 0000000000000000000000000000000000000000..61fcded43b46cab7775237c6d85de07b5df7d87e
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <netinet/in.h>
+
+#include "network_helpers.h"
+#include "test_progs.h"
+
+#define BPF_FILE "test_lwt_ip_encap.bpf.o"
+
+#define NETNS_NAME_SIZE 32
+#define NETNS_BASE "ns-lwt-ip-encap"
+
+#define IP4_ADDR_1 "172.16.1.100"
+#define IP4_ADDR_2 "172.16.2.100"
+#define IP4_ADDR_3 "172.16.3.100"
+#define IP4_ADDR_4 "172.16.4.100"
+#define IP4_ADDR_5 "172.16.5.100"
+#define IP4_ADDR_6 "172.16.6.100"
+#define IP4_ADDR_7 "172.16.7.100"
+#define IP4_ADDR_8 "172.16.8.100"
+#define IP4_ADDR_GRE "172.16.16.100"
+
+#define IP4_ADDR_SRC IP4_ADDR_1
+#define IP4_ADDR_DST IP4_ADDR_4
+
+#define IP6_ADDR_1 "fb01::1"
+#define IP6_ADDR_2 "fb02::1"
+#define IP6_ADDR_3 "fb03::1"
+#define IP6_ADDR_4 "fb04::1"
+#define IP6_ADDR_5 "fb05::1"
+#define IP6_ADDR_6 "fb06::1"
+#define IP6_ADDR_7 "fb07::1"
+#define IP6_ADDR_8 "fb08::1"
+#define IP6_ADDR_GRE "fb10::1"
+
+#define IP6_ADDR_SRC IP6_ADDR_1
+#define IP6_ADDR_DST IP6_ADDR_4
+
+/* Setup/topology:
+ *
+ * NS1 NS2 NS3
+ * veth1 <---> veth2 veth3 <---> veth4 (the top route)
+ * veth5 <---> veth6 veth7 <---> veth8 (the bottom route)
+ *
+ * Each vethN gets IP[4|6]_ADDR_N address.
+ *
+ * IP*_ADDR_SRC = IP*_ADDR_1
+ * IP*_ADDR_DST = IP*_ADDR_4
+ *
+ * All tests test pings from IP*_ADDR__SRC to IP*_ADDR_DST.
+ *
+ * By default, routes are configured to allow packets to go
+ * IP*_ADDR_1 <=> IP*_ADDR_2 <=> IP*_ADDR_3 <=> IP*_ADDR_4 (the top route).
+ *
+ * A GRE device is installed in NS3 with IP*_ADDR_GRE, and
+ * NS1/NS2 are configured to route packets to IP*_ADDR_GRE via IP*_ADDR_8
+ * (the bottom route).
+ *
+ * Tests:
+ *
+ * 1. Routes NS2->IP*_ADDR_DST are brought down, so the only way a ping
+ * from IP*_ADDR_SRC to IP*_ADDR_DST can work is via IP*_ADDR_GRE.
+ *
+ * 2a. In an egress test, a bpf LWT_XMIT program is installed on veth1
+ * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE.
+ *
+ * ping: SRC->[encap at veth1:egress]->GRE:decap->DST
+ * ping replies go DST->SRC directly
+ *
+ * 2b. In an ingress test, a bpf LWT_IN program is installed on veth2
+ * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE.
+ *
+ * ping: SRC->[encap at veth2:ingress]->GRE:decap->DST
+ * ping replies go DST->SRC directly
+ */
+
+static int create_ns(char *name, size_t name_sz)
+{
+ if (!name)
+ goto fail;
+
+ if (!ASSERT_OK(append_tid(name, name_sz), "append TID"))
+ goto fail;
+
+ SYS(fail, "ip netns add %s", name);
+
+ /* rp_filter gets confused by what these tests are doing, so disable it */
+ SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.all.rp_filter=0", name);
+ SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.default.rp_filter=0", name);
+ /* Disable IPv6 DAD because it sometimes takes too long and fails tests */
+ SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.accept_dad=0", name);
+ SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.default.accept_dad=0", name);
+
+ return 0;
+fail:
+ return -1;
+}
+
+static int set_top_addr(const char *ns1, const char *ns2, const char *ns3)
+{
+ SYS(fail, "ip -n %s a add %s/24 dev veth1", ns1, IP4_ADDR_1);
+ SYS(fail, "ip -n %s a add %s/24 dev veth2", ns2, IP4_ADDR_2);
+ SYS(fail, "ip -n %s a add %s/24 dev veth3", ns2, IP4_ADDR_3);
+ SYS(fail, "ip -n %s a add %s/24 dev veth4", ns3, IP4_ADDR_4);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth1", ns1, IP6_ADDR_1);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth2", ns2, IP6_ADDR_2);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth3", ns2, IP6_ADDR_3);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth4", ns3, IP6_ADDR_4);
+
+ SYS(fail, "ip -n %s link set dev veth1 up", ns1);
+ SYS(fail, "ip -n %s link set dev veth2 up", ns2);
+ SYS(fail, "ip -n %s link set dev veth3 up", ns2);
+ SYS(fail, "ip -n %s link set dev veth4 up", ns3);
+
+ return 0;
+fail:
+ return 1;
+}
+
+static int set_bottom_addr(const char *ns1, const char *ns2, const char *ns3)
+{
+ SYS(fail, "ip -n %s a add %s/24 dev veth5", ns1, IP4_ADDR_5);
+ SYS(fail, "ip -n %s a add %s/24 dev veth6", ns2, IP4_ADDR_6);
+ SYS(fail, "ip -n %s a add %s/24 dev veth7", ns2, IP4_ADDR_7);
+ SYS(fail, "ip -n %s a add %s/24 dev veth8", ns3, IP4_ADDR_8);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth5", ns1, IP6_ADDR_5);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth6", ns2, IP6_ADDR_6);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth7", ns2, IP6_ADDR_7);
+ SYS(fail, "ip -n %s -6 a add %s/128 dev veth8", ns3, IP6_ADDR_8);
+
+ SYS(fail, "ip -n %s link set dev veth5 up", ns1);
+ SYS(fail, "ip -n %s link set dev veth6 up", ns2);
+ SYS(fail, "ip -n %s link set dev veth7 up", ns2);
+ SYS(fail, "ip -n %s link set dev veth8 up", ns3);
+
+ return 0;
+fail:
+ return 1;
+}
+
+static int configure_vrf(const char *ns1, const char *ns2)
+{
+ if (!ns1 || !ns2)
+ goto fail;
+
+ SYS(fail, "ip -n %s link add red type vrf table 1001", ns1);
+ SYS(fail, "ip -n %s link set red up", ns1);
+ SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns1);
+ SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns1);
+ SYS(fail, "ip -n %s link set veth1 vrf red", ns1);
+ SYS(fail, "ip -n %s link set veth5 vrf red", ns1);
+
+ SYS(fail, "ip -n %s link add red type vrf table 1001", ns2);
+ SYS(fail, "ip -n %s link set red up", ns2);
+ SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns2);
+ SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns2);
+ SYS(fail, "ip -n %s link set veth2 vrf red", ns2);
+ SYS(fail, "ip -n %s link set veth3 vrf red", ns2);
+ SYS(fail, "ip -n %s link set veth6 vrf red", ns2);
+ SYS(fail, "ip -n %s link set veth7 vrf red", ns2);
+
+ return 0;
+fail:
+ return -1;
+}
+
+static int configure_ns1(const char *ns1, const char *vrf)
+{
+ struct nstoken *nstoken = NULL;
+
+ if (!ns1 || !vrf)
+ goto fail;
+
+ nstoken = open_netns(ns1);
+ if (!ASSERT_OK_PTR(nstoken, "open ns1"))
+ goto fail;
+
+ /* Top route */
+ SYS(fail, "ip route add %s/32 dev veth1 %s", IP4_ADDR_2, vrf);
+ SYS(fail, "ip route add default dev veth1 via %s %s", IP4_ADDR_2, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth1 %s", IP6_ADDR_2, vrf);
+ SYS(fail, "ip -6 route add default dev veth1 via %s %s", IP6_ADDR_2, vrf);
+ /* Bottom route */
+ SYS(fail, "ip route add %s/32 dev veth5 %s", IP4_ADDR_6, vrf);
+ SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_7, IP4_ADDR_6, vrf);
+ SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_8, IP4_ADDR_6, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth5 %s", IP6_ADDR_6, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_7, IP6_ADDR_6, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_8, IP6_ADDR_6, vrf);
+
+ close_netns(nstoken);
+ return 0;
+fail:
+ close_netns(nstoken);
+ return -1;
+}
+
+static int configure_ns2(const char *ns2, const char *vrf)
+{
+ struct nstoken *nstoken = NULL;
+
+ if (!ns2 || !vrf)
+ goto fail;
+
+ nstoken = open_netns(ns2);
+ if (!ASSERT_OK_PTR(nstoken, "open ns2"))
+ goto fail;
+
+ SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.ip_forward=1", ns2);
+ SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.forwarding=1", ns2);
+
+ /* Top route */
+ SYS(fail, "ip route add %s/32 dev veth2 %s", IP4_ADDR_1, vrf);
+ SYS(fail, "ip route add %s/32 dev veth3 %s", IP4_ADDR_4, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth2 %s", IP6_ADDR_1, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth3 %s", IP6_ADDR_4, vrf);
+ /* Bottom route */
+ SYS(fail, "ip route add %s/32 dev veth6 %s", IP4_ADDR_5, vrf);
+ SYS(fail, "ip route add %s/32 dev veth7 %s", IP4_ADDR_8, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth6 %s", IP6_ADDR_5, vrf);
+ SYS(fail, "ip -6 route add %s/128 dev veth7 %s", IP6_ADDR_8, vrf);
+
+ close_netns(nstoken);
+ return 0;
+fail:
+ close_netns(nstoken);
+ return -1;
+}
+
+static int configure_ns3(const char *ns3)
+{
+ struct nstoken *nstoken = NULL;
+
+ if (!ns3)
+ goto fail;
+
+ nstoken = open_netns(ns3);
+ if (!ASSERT_OK_PTR(nstoken, "open ns3"))
+ goto fail;
+
+ /* Top route */
+ SYS(fail, "ip route add %s/32 dev veth4", IP4_ADDR_3);
+ SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_1, IP4_ADDR_3);
+ SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_2, IP4_ADDR_3);
+ SYS(fail, "ip -6 route add %s/128 dev veth4", IP6_ADDR_3);
+ SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_1, IP6_ADDR_3);
+ SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_2, IP6_ADDR_3);
+ /* Bottom route */
+ SYS(fail, "ip route add %s/32 dev veth8", IP4_ADDR_7);
+ SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_5, IP4_ADDR_7);
+ SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_6, IP4_ADDR_7);
+ SYS(fail, "ip -6 route add %s/128 dev veth8", IP6_ADDR_7);
+ SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_5, IP6_ADDR_7);
+ SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_6, IP6_ADDR_7);
+
+ /* Configure IPv4 GRE device */
+ SYS(fail, "ip tunnel add gre_dev mode gre remote %s local %s ttl 255",
+ IP4_ADDR_1, IP4_ADDR_GRE);
+ SYS(fail, "ip link set gre_dev up");
+ SYS(fail, "ip a add %s dev gre_dev", IP4_ADDR_GRE);
+
+ /* Configure IPv6 GRE device */
+ SYS(fail, "ip tunnel add gre6_dev mode ip6gre remote %s local %s ttl 255",
+ IP6_ADDR_1, IP6_ADDR_GRE);
+ SYS(fail, "ip link set gre6_dev up");
+ SYS(fail, "ip a add %s dev gre6_dev", IP6_ADDR_GRE);
+
+ close_netns(nstoken);
+ return 0;
+fail:
+ close_netns(nstoken);
+ return -1;
+}
+
+static int setup_network(char *ns1, char *ns2, char *ns3, const char *vrf)
+{
+ if (!ns1 || !ns2 || !ns3 || !vrf)
+ goto fail;
+
+ SYS(fail, "ip -n %s link add veth1 type veth peer name veth2 netns %s", ns1, ns2);
+ SYS(fail, "ip -n %s link add veth3 type veth peer name veth4 netns %s", ns2, ns3);
+ SYS(fail, "ip -n %s link add veth5 type veth peer name veth6 netns %s", ns1, ns2);
+ SYS(fail, "ip -n %s link add veth7 type veth peer name veth8 netns %s", ns2, ns3);
+
+ if (vrf[0]) {
+ if (!ASSERT_OK(configure_vrf(ns1, ns2), "configure vrf"))
+ goto fail;
+ }
+ if (!ASSERT_OK(set_top_addr(ns1, ns2, ns3), "set top addresses"))
+ goto fail;
+
+ if (!ASSERT_OK(set_bottom_addr(ns1, ns2, ns3), "set bottom addresses"))
+ goto fail;
+
+ if (!ASSERT_OK(configure_ns1(ns1, vrf), "configure ns1 routes"))
+ goto fail;
+
+ if (!ASSERT_OK(configure_ns2(ns2, vrf), "configure ns2 routes"))
+ goto fail;
+
+ if (!ASSERT_OK(configure_ns3(ns3), "configure ns3 routes"))
+ goto fail;
+
+ /* Link bottom route to the GRE tunnels */
+ SYS(fail, "ip -n %s route add %s/32 dev veth5 via %s %s",
+ ns1, IP4_ADDR_GRE, IP4_ADDR_6, vrf);
+ SYS(fail, "ip -n %s route add %s/32 dev veth7 via %s %s",
+ ns2, IP4_ADDR_GRE, IP4_ADDR_8, vrf);
+ SYS(fail, "ip -n %s -6 route add %s/128 dev veth5 via %s %s",
+ ns1, IP6_ADDR_GRE, IP6_ADDR_6, vrf);
+ SYS(fail, "ip -n %s -6 route add %s/128 dev veth7 via %s %s",
+ ns2, IP6_ADDR_GRE, IP6_ADDR_8, vrf);
+
+ return 0;
+fail:
+ return -1;
+}
+
+int remove_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf)
+{
+ SYS(fail, "ip -n %s route del %s dev veth5 %s", ns1, IP4_ADDR_GRE, vrf);
+ SYS(fail, "ip -n %s route del %s dev veth7 %s", ns2, IP4_ADDR_GRE, vrf);
+ SYS(fail, "ip -n %s -6 route del %s/128 dev veth5 %s", ns1, IP6_ADDR_GRE, vrf);
+ SYS(fail, "ip -n %s -6 route del %s/128 dev veth7 %s", ns2, IP6_ADDR_GRE, vrf);
+
+ return 0;
+fail:
+ return -1;
+}
+
+int add_unreachable_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf)
+{
+ SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns1, IP4_ADDR_GRE, vrf);
+ SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns2, IP4_ADDR_GRE, vrf);
+ SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns1, IP6_ADDR_GRE, vrf);
+ SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns2, IP6_ADDR_GRE, vrf);
+
+ return 0;
+fail:
+ return -1;
+}
+
+#define GSO_SIZE 5000
+#define GSO_TCP_PORT 9000
+/* This tests the fix from commit ea0371f78799 ("net: fix GSO in bpf_lwt_push_ip_encap") */
+static int test_gso_fix(const char *ns1, const char *ns3, int family)
+{
+ const char *ip_addr = family == AF_INET ? IP4_ADDR_DST : IP6_ADDR_DST;
+ char gso_packet[GSO_SIZE] = {};
+ struct nstoken *nstoken = NULL;
+ int sfd, cfd, afd;
+ ssize_t bytes;
+ int ret = -1;
+
+ if (!ns1 || !ns3)
+ return ret;
+
+ nstoken = open_netns(ns3);
+ if (!ASSERT_OK_PTR(nstoken, "open ns3"))
+ return ret;
+
+ sfd = start_server_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL);
+ if (!ASSERT_OK_FD(sfd, "start server"))
+ goto close_netns;
+
+ close_netns(nstoken);
+
+ nstoken = open_netns(ns1);
+ if (!ASSERT_OK_PTR(nstoken, "open ns1"))
+ goto close_server;
+
+ cfd = connect_to_addr_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL);
+ if (!ASSERT_OK_FD(cfd, "connect to server"))
+ goto close_server;
+
+ close_netns(nstoken);
+ nstoken = NULL;
+
+ afd = accept(sfd, NULL, NULL);
+ if (!ASSERT_OK_FD(afd, "accept"))
+ goto close_client;
+
+ /* Send a packet larger than MTU */
+ bytes = send(cfd, gso_packet, GSO_SIZE, 0);
+ if (!ASSERT_EQ(bytes, GSO_SIZE, "send packet"))
+ goto close_accept;
+
+ /* Verify we received all expected bytes */
+ bytes = read(afd, gso_packet, GSO_SIZE);
+ if (!ASSERT_EQ(bytes, GSO_SIZE, "receive packet"))
+ goto close_accept;
+
+ ret = 0;
+
+close_accept:
+ close(afd);
+close_client:
+ close(cfd);
+close_server:
+ close(sfd);
+close_netns:
+ close_netns(nstoken);
+
+ return ret;
+}
+
+static int check_ping_ok(const char *ns1)
+{
+ SYS(fail, "ip netns exec %s ping -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP4_ADDR_DST);
+ SYS(fail, "ip netns exec %s ping6 -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP6_ADDR_DST);
+ return 0;
+fail:
+ return -1;
+}
+
+static int check_ping_fails(const char *ns1)
+{
+ int ret;
+
+ ret = SYS_NOFAIL("ip netns exec %s ping -c 1 -W1 -I veth1 %s", ns1, IP4_ADDR_DST);
+ if (!ret)
+ return -1;
+
+ ret = SYS_NOFAIL("ip netns exec %s ping6 -c 1 -W1 -I veth1 %s", ns1, IP6_ADDR_DST);
+ if (!ret)
+ return -1;
+
+ return 0;
+}
+
+#define EGRESS true
+#define INGRESS false
+#define IPV4_ENCAP true
+#define IPV6_ENCAP false
+static void lwt_ip_encap(bool ipv4_encap, bool egress, const char *vrf)
+{
+ char ns1[NETNS_NAME_SIZE] = NETNS_BASE "-1-";
+ char ns2[NETNS_NAME_SIZE] = NETNS_BASE "-2-";
+ char ns3[NETNS_NAME_SIZE] = NETNS_BASE "-3-";
+ char *sec = ipv4_encap ? "encap_gre" : "encap_gre6";
+
+ if (!vrf)
+ return;
+
+ if (!ASSERT_OK(create_ns(ns1, NETNS_NAME_SIZE), "create ns1"))
+ goto out;
+ if (!ASSERT_OK(create_ns(ns2, NETNS_NAME_SIZE), "create ns2"))
+ goto out;
+ if (!ASSERT_OK(create_ns(ns3, NETNS_NAME_SIZE), "create ns3"))
+ goto out;
+
+ if (!ASSERT_OK(setup_network(ns1, ns2, ns3, vrf), "setup network"))
+ goto out;
+
+ /* By default, pings work */
+ if (!ASSERT_OK(check_ping_ok(ns1), "ping OK"))
+ goto out;
+
+ /* Remove NS2->DST routes, ping fails */
+ SYS(out, "ip -n %s route del %s/32 dev veth3 %s", ns2, IP4_ADDR_DST, vrf);
+ SYS(out, "ip -n %s -6 route del %s/128 dev veth3 %s", ns2, IP6_ADDR_DST, vrf);
+ if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail"))
+ goto out;
+
+ /* Install replacement routes (LWT/eBPF), pings succeed */
+ if (egress) {
+ SYS(out, "ip -n %s route add %s encap bpf xmit obj %s sec %s dev veth1 %s",
+ ns1, IP4_ADDR_DST, BPF_FILE, sec, vrf);
+ SYS(out, "ip -n %s -6 route add %s encap bpf xmit obj %s sec %s dev veth1 %s",
+ ns1, IP6_ADDR_DST, BPF_FILE, sec, vrf);
+ } else {
+ SYS(out, "ip -n %s route add %s encap bpf in obj %s sec %s dev veth2 %s",
+ ns2, IP4_ADDR_DST, BPF_FILE, sec, vrf);
+ SYS(out, "ip -n %s -6 route add %s encap bpf in obj %s sec %s dev veth2 %s",
+ ns2, IP6_ADDR_DST, BPF_FILE, sec, vrf);
+ }
+
+ if (!ASSERT_OK(check_ping_ok(ns1), "ping OK"))
+ goto out;
+
+ /* Skip GSO tests with VRF: VRF routing needs properly assigned
+ * source IP/device, which is easy to do with ping but hard with TCP.
+ */
+ if (egress && !vrf[0]) {
+ if (!ASSERT_OK(test_gso_fix(ns1, ns3, AF_INET), "test GSO"))
+ goto out;
+ }
+
+ /* Negative test: remove routes to GRE devices: ping fails */
+ if (!ASSERT_OK(remove_routes_to_gredev(ns1, ns2, vrf), "remove routes to gredev"))
+ goto out;
+ if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail"))
+ goto out;
+
+ /* Another negative test */
+ if (!ASSERT_OK(add_unreachable_routes_to_gredev(ns1, ns2, vrf),
+ "add unreachable routes"))
+ goto out;
+ ASSERT_OK(check_ping_fails(ns1), "ping expected fail");
+
+out:
+ SYS_NOFAIL("ip netns del %s", ns1);
+ SYS_NOFAIL("ip netns del %s", ns2);
+ SYS_NOFAIL("ip netns del %s", ns3);
+}
+
+void test_lwt_ip_encap_vrf_ipv6(void)
+{
+ if (test__start_subtest("egress"))
+ lwt_ip_encap(IPV6_ENCAP, EGRESS, "vrf red");
+
+ if (test__start_subtest("ingress"))
+ lwt_ip_encap(IPV6_ENCAP, INGRESS, "vrf red");
+}
+
+void test_lwt_ip_encap_vrf_ipv4(void)
+{
+ if (test__start_subtest("egress"))
+ lwt_ip_encap(IPV4_ENCAP, EGRESS, "vrf red");
+
+ if (test__start_subtest("ingress"))
+ lwt_ip_encap(IPV4_ENCAP, INGRESS, "vrf red");
+}
+
+void test_lwt_ip_encap_ipv6(void)
+{
+ if (test__start_subtest("egress"))
+ lwt_ip_encap(IPV6_ENCAP, EGRESS, "");
+
+ if (test__start_subtest("ingress"))
+ lwt_ip_encap(IPV6_ENCAP, INGRESS, "");
+}
+
+void test_lwt_ip_encap_ipv4(void)
+{
+ if (test__start_subtest("egress"))
+ lwt_ip_encap(IPV4_ENCAP, EGRESS, "");
+
+ if (test__start_subtest("ingress"))
+ lwt_ip_encap(IPV4_ENCAP, INGRESS, "");
+}
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
deleted file mode 100755
index 1e565f47aca940d8dc7235d823c48537d7a708b8..0000000000000000000000000000000000000000
--- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
+++ /dev/null
@@ -1,476 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Setup/topology:
-#
-# NS1 NS2 NS3
-# veth1 <---> veth2 veth3 <---> veth4 (the top route)
-# veth5 <---> veth6 veth7 <---> veth8 (the bottom route)
-#
-# each vethN gets IPv[4|6]_N address
-#
-# IPv*_SRC = IPv*_1
-# IPv*_DST = IPv*_4
-#
-# all tests test pings from IPv*_SRC to IPv*_DST
-#
-# by default, routes are configured to allow packets to go
-# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route)
-#
-# a GRE device is installed in NS3 with IPv*_GRE, and
-# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8
-# (the bottom route)
-#
-# Tests:
-#
-# 1. routes NS2->IPv*_DST are brought down, so the only way a ping
-# from IP*_SRC to IP*_DST can work is via IPv*_GRE
-#
-# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1
-# that encaps the packets with an IP/GRE header to route to IPv*_GRE
-#
-# ping: SRC->[encap at veth1:egress]->GRE:decap->DST
-# ping replies go DST->SRC directly
-#
-# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2
-# that encaps the packets with an IP/GRE header to route to IPv*_GRE
-#
-# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST
-# ping replies go DST->SRC directly
-
-BPF_FILE="test_lwt_ip_encap.bpf.o"
-if [[ $EUID -ne 0 ]]; then
- echo "This script must be run as root"
- echo "FAIL"
- exit 1
-fi
-
-readonly NS1="ns1-$(mktemp -u XXXXXX)"
-readonly NS2="ns2-$(mktemp -u XXXXXX)"
-readonly NS3="ns3-$(mktemp -u XXXXXX)"
-
-readonly IPv4_1="172.16.1.100"
-readonly IPv4_2="172.16.2.100"
-readonly IPv4_3="172.16.3.100"
-readonly IPv4_4="172.16.4.100"
-readonly IPv4_5="172.16.5.100"
-readonly IPv4_6="172.16.6.100"
-readonly IPv4_7="172.16.7.100"
-readonly IPv4_8="172.16.8.100"
-readonly IPv4_GRE="172.16.16.100"
-
-readonly IPv4_SRC=$IPv4_1
-readonly IPv4_DST=$IPv4_4
-
-readonly IPv6_1="fb01::1"
-readonly IPv6_2="fb02::1"
-readonly IPv6_3="fb03::1"
-readonly IPv6_4="fb04::1"
-readonly IPv6_5="fb05::1"
-readonly IPv6_6="fb06::1"
-readonly IPv6_7="fb07::1"
-readonly IPv6_8="fb08::1"
-readonly IPv6_GRE="fb10::1"
-
-readonly IPv6_SRC=$IPv6_1
-readonly IPv6_DST=$IPv6_4
-
-TEST_STATUS=0
-TESTS_SUCCEEDED=0
-TESTS_FAILED=0
-
-TMPFILE=""
-
-process_test_results()
-{
- if [[ "${TEST_STATUS}" -eq 0 ]] ; then
- echo "PASS"
- TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1))
- else
- echo "FAIL"
- TESTS_FAILED=$((TESTS_FAILED+1))
- fi
-}
-
-print_test_summary_and_exit()
-{
- echo "passed tests: ${TESTS_SUCCEEDED}"
- echo "failed tests: ${TESTS_FAILED}"
- if [ "${TESTS_FAILED}" -eq "0" ] ; then
- exit 0
- else
- exit 1
- fi
-}
-
-setup()
-{
- set -e # exit on error
- TEST_STATUS=0
-
- # create devices and namespaces
- ip netns add "${NS1}"
- ip netns add "${NS2}"
- ip netns add "${NS3}"
-
- # rp_filter gets confused by what these tests are doing, so disable it
- ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0
- ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0
- ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0
- ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0
- ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0
- ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0
-
- # disable IPv6 DAD because it sometimes takes too long and fails tests
- ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0
- ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0
- ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0
- ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0
- ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0
- ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0
-
- ip link add veth1 type veth peer name veth2
- ip link add veth3 type veth peer name veth4
- ip link add veth5 type veth peer name veth6
- ip link add veth7 type veth peer name veth8
-
- ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1
- ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1
-
- ip link set veth1 netns ${NS1}
- ip link set veth2 netns ${NS2}
- ip link set veth3 netns ${NS2}
- ip link set veth4 netns ${NS3}
- ip link set veth5 netns ${NS1}
- ip link set veth6 netns ${NS2}
- ip link set veth7 netns ${NS2}
- ip link set veth8 netns ${NS3}
-
- if [ ! -z "${VRF}" ] ; then
- ip -netns ${NS1} link add red type vrf table 1001
- ip -netns ${NS1} link set red up
- ip -netns ${NS1} route add table 1001 unreachable default metric 8192
- ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192
- ip -netns ${NS1} link set veth1 vrf red
- ip -netns ${NS1} link set veth5 vrf red
-
- ip -netns ${NS2} link add red type vrf table 1001
- ip -netns ${NS2} link set red up
- ip -netns ${NS2} route add table 1001 unreachable default metric 8192
- ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192
- ip -netns ${NS2} link set veth2 vrf red
- ip -netns ${NS2} link set veth3 vrf red
- ip -netns ${NS2} link set veth6 vrf red
- ip -netns ${NS2} link set veth7 vrf red
- fi
-
- # configure addesses: the top route (1-2-3-4)
- ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1
- ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2
- ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3
- ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4
- ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1
- ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2
- ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3
- ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4
-
- # configure addresses: the bottom route (5-6-7-8)
- ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5
- ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6
- ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7
- ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8
- ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5
- ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6
- ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7
- ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8
-
- ip -netns ${NS1} link set dev veth1 up
- ip -netns ${NS2} link set dev veth2 up
- ip -netns ${NS2} link set dev veth3 up
- ip -netns ${NS3} link set dev veth4 up
- ip -netns ${NS1} link set dev veth5 up
- ip -netns ${NS2} link set dev veth6 up
- ip -netns ${NS2} link set dev veth7 up
- ip -netns ${NS3} link set dev veth8 up
-
- # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default;
- # the bottom route to specific bottom addresses
-
- # NS1
- # top route
- ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF}
- ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default
- ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF}
- ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default
- # bottom route
- ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF}
- ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF}
- ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF}
- ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF}
- ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF}
- ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF}
-
- # NS2
- # top route
- ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF}
- ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF}
- # bottom route
- ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF}
- ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF}
-
- # NS3
- # top route
- ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4
- ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3}
- ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3}
- ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4
- ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3}
- ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3}
- # bottom route
- ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8
- ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7}
- ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7}
- ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8
- ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7}
- ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7}
-
- # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route
- ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255
- ip -netns ${NS3} link set gre_dev up
- ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev
- ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF}
- ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF}
-
-
- # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route
- ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255
- ip -netns ${NS3} link set gre6_dev up
- ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev
- ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF}
-
- TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX)
-
- sleep 1 # reduce flakiness
- set +e
-}
-
-cleanup()
-{
- if [ -f ${TMPFILE} ] ; then
- rm ${TMPFILE}
- fi
-
- ip netns del ${NS1} 2> /dev/null
- ip netns del ${NS2} 2> /dev/null
- ip netns del ${NS3} 2> /dev/null
-}
-
-trap cleanup EXIT
-
-remove_routes_to_gredev()
-{
- ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF}
- ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF}
- ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF}
- ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF}
-}
-
-add_unreachable_routes_to_gredev()
-{
- ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF}
- ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF}
- ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF}
- ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF}
-}
-
-test_ping()
-{
- local readonly PROTO=$1
- local readonly EXPECTED=$2
- local RET=0
-
- if [ "${PROTO}" == "IPv4" ] ; then
- ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null
- RET=$?
- elif [ "${PROTO}" == "IPv6" ] ; then
- ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
- RET=$?
- else
- echo " test_ping: unknown PROTO: ${PROTO}"
- TEST_STATUS=1
- fi
-
- if [ "0" != "${RET}" ]; then
- RET=1
- fi
-
- if [ "${EXPECTED}" != "${RET}" ] ; then
- echo " test_ping failed: expected: ${EXPECTED}; got ${RET}"
- TEST_STATUS=1
- fi
-}
-
-test_gso()
-{
- local readonly PROTO=$1
- local readonly PKT_SZ=5000
- local IP_DST=""
- : > ${TMPFILE} # trim the capture file
-
- # check that nc is present
- command -v nc >/dev/null 2>&1 || \
- { echo >&2 "nc is not available: skipping TSO tests"; return; }
-
- # listen on port 9000, capture TCP into $TMPFILE
- if [ "${PROTO}" == "IPv4" ] ; then
- IP_DST=${IPv4_DST}
- ip netns exec ${NS3} bash -c \
- "nc -4 -l -p 9000 > ${TMPFILE} &"
- elif [ "${PROTO}" == "IPv6" ] ; then
- IP_DST=${IPv6_DST}
- ip netns exec ${NS3} bash -c \
- "nc -6 -l -p 9000 > ${TMPFILE} &"
- RET=$?
- else
- echo " test_gso: unknown PROTO: ${PROTO}"
- TEST_STATUS=1
- fi
- sleep 1 # let nc start listening
-
- # send a packet larger than MTU
- ip netns exec ${NS1} bash -c \
- "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null"
- sleep 2 # let the packet get delivered
-
- # verify we received all expected bytes
- SZ=$(stat -c %s ${TMPFILE})
- if [ "$SZ" != "$PKT_SZ" ] ; then
- echo " test_gso failed: ${PROTO}"
- TEST_STATUS=1
- fi
-}
-
-test_egress()
-{
- local readonly ENCAP=$1
- echo "starting egress ${ENCAP} encap test ${VRF}"
- setup
-
- # by default, pings work
- test_ping IPv4 0
- test_ping IPv6 0
-
- # remove NS2->DST routes, ping fails
- ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF}
- ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF}
- test_ping IPv4 1
- test_ping IPv6 1
-
- # install replacement routes (LWT/eBPF), pings succeed
- if [ "${ENCAP}" == "IPv4" ] ; then
- ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \
- ${BPF_FILE} sec encap_gre dev veth1 ${VRF}
- ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \
- ${BPF_FILE} sec encap_gre dev veth1 ${VRF}
- elif [ "${ENCAP}" == "IPv6" ] ; then
- ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \
- ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF}
- ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \
- ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF}
- else
- echo " unknown encap ${ENCAP}"
- TEST_STATUS=1
- fi
- test_ping IPv4 0
- test_ping IPv6 0
-
- # skip GSO tests with VRF: VRF routing needs properly assigned
- # source IP/device, which is easy to do with ping and hard with dd/nc.
- if [ -z "${VRF}" ] ; then
- test_gso IPv4
- test_gso IPv6
- fi
-
- # a negative test: remove routes to GRE devices: ping fails
- remove_routes_to_gredev
- test_ping IPv4 1
- test_ping IPv6 1
-
- # another negative test
- add_unreachable_routes_to_gredev
- test_ping IPv4 1
- test_ping IPv6 1
-
- cleanup
- process_test_results
-}
-
-test_ingress()
-{
- local readonly ENCAP=$1
- echo "starting ingress ${ENCAP} encap test ${VRF}"
- setup
-
- # need to wait a bit for IPv6 to autoconf, otherwise
- # ping6 sometimes fails with "unable to bind to address"
-
- # by default, pings work
- test_ping IPv4 0
- test_ping IPv6 0
-
- # remove NS2->DST routes, pings fail
- ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF}
- ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF}
- test_ping IPv4 1
- test_ping IPv6 1
-
- # install replacement routes (LWT/eBPF), pings succeed
- if [ "${ENCAP}" == "IPv4" ] ; then
- ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \
- ${BPF_FILE} sec encap_gre dev veth2 ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \
- ${BPF_FILE} sec encap_gre dev veth2 ${VRF}
- elif [ "${ENCAP}" == "IPv6" ] ; then
- ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \
- ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF}
- ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \
- ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF}
- else
- echo "FAIL: unknown encap ${ENCAP}"
- TEST_STATUS=1
- fi
- test_ping IPv4 0
- test_ping IPv6 0
-
- # a negative test: remove routes to GRE devices: ping fails
- remove_routes_to_gredev
- test_ping IPv4 1
- test_ping IPv6 1
-
- # another negative test
- add_unreachable_routes_to_gredev
- test_ping IPv4 1
- test_ping IPv6 1
-
- cleanup
- process_test_results
-}
-
-VRF=""
-test_egress IPv4
-test_egress IPv6
-test_ingress IPv4
-test_ingress IPv6
-
-VRF="vrf red"
-test_egress IPv4
-test_egress IPv6
-test_ingress IPv4
-test_ingress IPv6
-
-print_test_summary_and_exit

---
base-commit: 5fd21aaac37919abc5c5d0df1eb06a9f02518f27
change-id: 20250206-lwt_ip-b6a91d2787bf

Best regards,
--
Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>