Robert:
This makes sense. I am pretty green when comes to LINUX. Does anybody has a boot sequence script to share? Thank you in advance.
Kirt
-----Original
Message-----
From: Robert Stannard
[mailto:robert.stannard@uku.co.uk]
Sent: Tuesday, June 27, 2006 10:38 AM
To: Kirti S. Bajwa
Cc: bridge@lists.osdl.org
Subject: Re: [Bridge] Bridge does
not stay UP!!!
Dear Kirt,
The bridge needs to be setup each time you reboot the system. It is not
remembered or setup in the boot sequence as standard.
You need to include a small script in the bootup sequence to initialise the
bridge automatically.
I hope this helps a little?
Best Regards
Robert Stannard
PS
There are some previous posts about this.
See http://lists.osdl.org/mailman/htdig/bridge/2004-March/000215.html
for one example.
Kirti S. Bajwa wrote:
Thank you for your response. I have read & re-read the documents you have suggested. Why the Bridge would not stay ACTIVE is not discussed in any of these documents.
Anybody else has a suggestion?
Kirt
-----Original Message-----
From:
bridge-bounces@lists.osdl.org
[mailto:bridge-bounces@lists.osdl.org]
On
Behalf Of German Jimenez Leal
Sent:
Monday, June 26, 2006 7:00 PM
To:
bridge@lists.osdl.org
Subject:
Re: [Bridge] Bridge does not stay UP!!!
Hello Kirti:
http://linux-net.osdl.org/index.php/Bridge
http://www.shorewall.net/ shorewall 3.x documentacion ---- 7.-Bridging------ Bridge/Firewall (control traffic through the bridge)
De: bridge-bounces@lists.osdl.org [mailto:bridge-bounces@lists.osdl.org]
En
nombre de Kirti S. Bajwa
Enviado
el: Lunes, 26 de Junio de 2006 03:54 p.m.
Para:
bridge@lists.osdl.org
Asunto:
[Bridge] Bridge does not stay UP!!!
Hello List:
I am trying to setup a bridge & Shorewall on a CentOS 4.3 (fresh Install) server. I successfully setup the bridge. However when I reboot the system, the bridge does not remain ACTIVE.
Am I missing a setting?
Thanks.
Kirti
_______________________________________________Bridge mailing listBridge@lists.osdl.orghttps://lists.osdl.org/mailman/listinfo/bridge