From mboxrd@z Thu Jan 1 00:00:00 1970 From: Leonardo Borda In-Reply-To: <4D793AB5.5030807@gmail.com> References: <1299788413.4801.20.camel@bordalnx> <4D793AB5.5030807@gmail.com> Content-Type: text/plain; charset="UTF-8" Date: Thu, 10 Mar 2011 18:39:25 -0500 Message-ID: <1299800365.9834.10.camel@bordalnx> Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Subject: Re: [Bridge] [Bonding-devel] bridge + bonding with arp monitoring enabled List-Id: Linux Ethernet Bridging List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Nicolas de =?ISO-8859-1?Q?Peslo=FCan?= Cc: Zaid Al Hamami , Bridge , bonding-devel@lists.sourceforge.net Hi Nicolas, Thank you for your suggestion, it works. Actually I was thinking that in order to have arp monitoring (bond_arp_ip_target ) enabled the bond0 interface had to have an ip address configured and as per tcpdump samples show that is not true.=20 So here it is my current working configuration. # The loopback network interface auto lo iface lo inet loopback auto bond0 iface bond0 inet manual bond-slaves none bond-mode active-backup bond_arp_ip_target 10.153.107.1 bond_arp_interval 60 auto eth0 iface eth0 inet manual bond-master bond0 bond-primary eth0 eth1 auto eth1 iface eth1 inet manual bond-master bond0 bond-primary eth0 eth1 auto br0 iface br0 inet static address 10.153.107.110 netmask 255.255.255.0 gateway 10.153.107.1 bridge_ports bond0 bridge_stp off bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_maxwait 0 ### Tcpdump output 00:1c:c4:6b:38:4a > ff:ff:ff:ff:ff:ff, ARP, length 60: Request who-has 10.153.107.1 tell 0.0.0.0, length 46 00:1c:c4:6b:38:4a > ff:ff:ff:ff:ff:ff, ARP, length 60: Request who-has 10.153.107.1 tell 0.0.0.0, length 46 00:1c:c4:6b:38:4a > ff:ff:ff:ff:ff:ff, ARP, length 60: Request who-has 10.153.107.1 tell 0.0.0.0, length 46 Thanks guys. Leonardo On Thu, 2011-03-10 at 21:55 +0100, Nicolas de Peslo=C3=BCan wrote:=20 > Le 10/03/2011 21:20, Leonardo Borda a =C3=A9crit : > > Hello Guys, >=20 > Hi Leonardo, >=20 > > I am trying to configure bridge + bonding with arp monitoring enabled. > > Whenever I activate the bridge interface and assign bond0 to the bridge > > Everything stops working. > > > > I am on ubuntu 10.04 LTS. > > > > Can I have an ip address in the bond0 interface WHILE not having an IP > > address in the bridge interface? > > In order to have bond arp monitoring I must have an ip address in the > > bond interface as far as I understand. >=20 > Did you try to setup the IP address on br0 instead? I think it should wor= k. Do you have any reasons=20 > to put the IP address on bond0 instead? >=20 > > Here it is my current configuration. > > PS: I have seen similar configurations although none of them have an ip > > address configured in the bond0 interface. > > > > # The loopback network interface > > auto lo > > iface lo inet loopback > > > > auto bond0 > > iface bond0 inet static > > address 10.153.107.110 > > netmask 255.255.255.0 > > gateway 10.153.107.1 > > bond-slaves none > > bond-mode active-backup > > bond_arp_ip_target 10.153.107.1 > > bond_arp_interval 500 > > > > auto eth0 > > iface eth0 inet manual > > bond-master bond0 > > bond-primary eth0 eth1 > > > > auto eth1 > > iface eth1 inet manual > > bond-master bond0 > > bond-primary eth0 eth1 > > > > auto br0 > > iface br0 inet manual > > bridge_ports bond0 > > bridge_stp off > > bridge_fd 9 > > bridge_hello 2 > > bridge_maxage 12 > > bridge_maxwait 0 > > > > Leonardo > > > > > > -----------------------------------------------------------------------= ------- > > Colocation vs. Managed Hosting > > A question and answer guide to determining the best fit > > for your organization - today and in the future. > > http://p.sf.net/sfu/internap-sfd2d > > _______________________________________________ > > Bonding-devel mailing list > > Bonding-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/bonding-devel > > >=20 > _______________________________________________ > Bridge mailing list > Bridge@lists.linux-foundation.org > https://lists.linux-foundation.org/mailman/listinfo/bridge --=20 Leonardo Borda Server Support Analyst Canonical Canada