[Bridge] [PATCH net-next 7/8] selftests: mlxsw: Add a test for VxLAN configuration with a VLAN-aware bridge

[Ido Schimmel <idosch@mellanox.com>]

Extend the existing VLAN-unaware tests with their VLAN-aware
counterparts. This includes sanitization of invalid configuration and
offload indication on the local route performing decapsulation and the
FDB entries perform encapsulation.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
---
 .../selftests/drivers/net/mlxsw/vxlan.sh      | 204 +++++++++++++++++-
 1 file changed, 203 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
index d00d4665c807..90b4998a3b70 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
@@ -6,7 +6,8 @@
 
 lib_dir=$(dirname $0)/../../../net/forwarding
 
-ALL_TESTS="sanitization_test offload_indication_test"
+ALL_TESTS="sanitization_test offload_indication_test \
+	sanitization_vlan_aware_test offload_indication_vlan_aware_test"
 NUM_NETIFS=2
 source $lib_dir/lib.sh
 
@@ -654,6 +655,207 @@ offload_indication_test()
 	offload_indication_setup_destroy
 }
 
+sanitization_vlan_aware_test()
+{
+	RET=0
+
+	ip link add dev br0 type bridge mcast_snooping 0 vlan_filtering 1
+
+	ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+
+	ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+
+	# Test that when each VNI is mapped to a different VLAN we can enslave
+	# a port to the bridge
+	bridge vlan add vid 10 dev vxlan10 pvid untagged
+	bridge vlan add vid 20 dev vxlan20 pvid untagged
+
+	ip link set dev $swp1 master br0
+	check_err $?
+
+	log_test "vlan-aware - enslavement to vlan-aware bridge"
+
+	# Try to map both VNIs to the same VLAN and make sure configuration
+	# fails
+	RET=0
+
+	bridge vlan add vid 10 dev vxlan20 pvid untagged &> /dev/null
+	check_fail $?
+
+	log_test "vlan-aware - two vnis mapped to the same vlan"
+
+	# Test that enslavement of a port to a bridge fails when two VNIs
+	# are mapped to the same VLAN
+	RET=0
+
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vxlan20 pvid untagged
+	bridge vlan add vid 10 dev vxlan20 pvid untagged
+
+	ip link set dev $swp1 master br0 &> /dev/null
+	check_fail $?
+
+	log_test "vlan-aware - failed enslavement to vlan-aware bridge"
+
+	ip link del dev vxlan20
+	ip link del dev vxlan10
+	ip link del dev br0
+}
+
+offload_indication_vlan_aware_setup_create()
+{
+	# Create a simple setup with two VxLAN devices and a single VLAN-aware
+	# bridge
+	ip link add name br0 up type bridge mcast_snooping 0 vlan_filtering 1 \
+		vlan_default_pvid 0
+
+	ip link set dev $swp1 master br0
+
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip address add 198.51.100.1/32 dev lo
+
+	ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+	ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+
+	bridge vlan add vid 10 dev vxlan10 pvid untagged
+	bridge vlan add vid 20 dev vxlan20 pvid untagged
+}
+
+offload_indication_vlan_aware_setup_destroy()
+{
+	bridge vlan del vid 20 dev vxlan20
+	bridge vlan del vid 10 dev vxlan10
+
+	ip link del dev vxlan20
+	ip link del dev vxlan10
+
+	ip address del 198.51.100.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br0
+}
+
+offload_indication_vlan_aware_fdb_test()
+{
+	RET=0
+
+	log_info "vxlan entry offload indication - vlan-aware"
+
+	bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self master static \
+		dst 198.51.100.2 vlan 10
+
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_err $?
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_err $?
+
+	log_test "vxlan entry offload indication - initial state"
+
+	# Remove FDB entry from the bridge driver and check that corresponding
+	# entry in the VxLAN driver is not marked as offloaded
+	RET=0
+
+	bridge fdb del de:ad:be:ef:13:37 dev vxlan10 master vlan 10
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_fail $?
+
+	log_test "vxlan entry offload indication - after removal from bridge"
+
+	# Add the FDB entry back to the bridge driver and make sure it is
+	# marked as offloaded in both drivers
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev vxlan10 master static vlan 10
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_err $?
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_err $?
+
+	log_test "vxlan entry offload indication - after re-add to bridge"
+
+	# Remove FDB entry from the VxLAN driver and check that corresponding
+	# entry in the bridge driver is not marked as offloaded
+	RET=0
+
+	bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_fail $?
+
+	log_test "vxlan entry offload indication - after removal from vxlan"
+
+	# Add the FDB entry back to the VxLAN driver and make sure it is
+	# marked as offloaded in both drivers
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self dst 198.51.100.2
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_err $?
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_err $?
+
+	log_test "vxlan entry offload indication - after re-add to vxlan"
+
+	bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self master vlan 10
+}
+
+offload_indication_vlan_aware_decap_route_test()
+{
+	RET=0
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_err $?
+
+	# Toggle PVID flag on one VxLAN device and make sure route is still
+	# marked as offloaded
+	bridge vlan add vid 10 dev vxlan10 untagged
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_err $?
+
+	# Toggle PVID flag on second VxLAN device and make sure route is no
+	# longer marked as offloaded
+	bridge vlan add vid 20 dev vxlan20 untagged
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_fail $?
+
+	# Toggle PVID flag back and make sure route is marked as offloaded
+	bridge vlan add vid 10 dev vxlan10 pvid untagged
+	bridge vlan add vid 20 dev vxlan20 pvid untagged
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_err $?
+
+	log_test "vxlan decap route - vni map/unmap"
+}
+
+offload_indication_vlan_aware_test()
+{
+	offload_indication_vlan_aware_setup_create
+	offload_indication_vlan_aware_fdb_test
+	offload_indication_vlan_aware_decap_route_test
+	offload_indication_vlan_aware_setup_destroy
+}
+
 trap cleanup EXIT
 
 setup_prepare
-- 
2.19.1