[Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Hans Schultz]

From: "Hans J. Schultz" <netdev@kapio-technology.com>

Verify that the MAC-Auth mechanism works by adding a FDB entry with the
locked flag set, denying access until the FDB entry is replaced with a
FDB entry without the locked flag set.

Add test of blackhole fdb entries, verifying that there is no forwarding
to a blackhole entry from any port, and that the blackhole entry can be
replaced.

Also add a test that verifies that sticky FDB entries cannot roam (this
is not needed for now, but should in general be present anyhow for future
applications).

Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com>
---
 .../net/forwarding/bridge_blackhole_fdb.sh    | 102 +++++++++++++++++
 .../net/forwarding/bridge_locked_port.sh      | 106 +++++++++++++++++-
 .../net/forwarding/bridge_sticky_fdb.sh       |  21 +++-
 tools/testing/selftests/net/forwarding/lib.sh |  18 +++
 4 files changed, 245 insertions(+), 2 deletions(-)
 create mode 100755 tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh

diff --git a/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
new file mode 100755
index 000000000000..54b1a51e1ed6
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="blackhole_fdb"
+NUM_NETIFS=4
+source lib.sh
+
+switch_create()
+{
+        ip link add dev br0 type bridge
+
+        ip link set dev $swp1 master br0
+        ip link set dev $swp2 master br0
+
+        ip link set dev br0 up
+        ip link set dev $h1 up
+        ip link set dev $swp1 up
+        ip link set dev $h2 up
+        ip link set dev $swp2 up
+
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+
+        ip link set dev $swp2 down
+        ip link set dev $h2 down
+        ip link set dev $swp1 down
+        ip link set dev $h1 down
+
+        ip link del dev br0
+}
+
+setup_prepare()
+{
+        h1=${NETIFS[p1]}
+        swp1=${NETIFS[p2]}
+        h2=${NETIFS[p3]}
+        swp2=${NETIFS[p4]}
+
+        switch_create
+}
+
+cleanup()
+{
+        pre_cleanup
+        switch_destroy
+}
+
+# Check that there is no egress with blackhole entry and that blackhole entries can be replaced
+blackhole_fdb()
+{
+        RET=0
+
+	check_blackhole_fdb_support || return 0
+
+	tc filter add dev $swp2 egress protocol ip pref 1 handle 1 flower \
+		dst_ip 192.0.2.2 ip_proto udp dst_port 12345 action pass
+
+	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
+		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
+
+	tc_check_packets "dev $swp2 egress" 1 1
+	check_err $? "Packet not seen on egress before adding blackhole entry"
+
+	bridge fdb add `mac_get $h2` dev br0 blackhole
+	bridge fdb get `mac_get $h2` br br0 | grep -q blackhole
+	check_err $? "Blackhole entry not found"
+
+	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
+		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
+
+	tc_check_packets "dev $swp2 egress" 1 1
+	check_err $? "Packet seen on egress after adding blackhole entry"
+
+	# Check blackhole entries can be replaced.
+	bridge fdb replace `mac_get $h2` dev $swp2 master static
+	bridge fdb get `mac_get $h2` br br0 | grep -q blackhole
+	check_fail $? "Blackhole entry found after replacement"
+
+	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
+		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
+
+	tc_check_packets "dev $swp2 egress" 1 2
+	check_err $? "Packet not seen on egress after replacing blackhole entry"
+
+	bridge fdb del `mac_get $h2` dev $swp2 master static
+	tc filter del dev $swp2 egress protocol ip pref 1 handle 1 flower
+
+        log_test "Blackhole FDB entry"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
index 5b02b6b60ce7..59b8b7666eab 100755
--- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
@@ -1,7 +1,15 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="locked_port_ipv4 locked_port_ipv6 locked_port_vlan"
+ALL_TESTS="
+	locked_port_ipv4
+	locked_port_ipv6
+	locked_port_vlan
+	locked_port_mab
+	locked_port_station_move
+	locked_port_mab_station_move
+"
+
 NUM_NETIFS=4
 CHECK_TC="no"
 source lib.sh
@@ -166,6 +174,102 @@ locked_port_ipv6()
 	log_test "Locked port ipv6"
 }
 
+locked_port_mab()
+{
+	RET=0
+	check_locked_port_support || return 0
+
+	ping_do $h1 192.0.2.2
+	check_err $? "MAB: Ping did not work before locking port"
+
+	bridge link set dev $swp1 locked on
+	check_port_mab_support $swp1 || return 0
+
+	ping_do $h1 192.0.2.2
+	check_fail $? "MAB: Ping worked on locked port without FDB entry"
+
+	bridge fdb show | grep `mac_get $h1` | grep -q "locked"
+	check_err $? "MAB: No locked fdb entry after ping on locked port"
+
+	bridge fdb replace `mac_get $h1` dev $swp1 master static
+
+	ping_do $h1 192.0.2.2
+	check_err $? "MAB: Ping did not work with fdb entry without locked flag"
+
+	bridge fdb del `mac_get $h1` dev $swp1 master
+	bridge link set dev $swp1 locked off mab off
+
+	log_test "Locked port MAB"
+}
+
+# No roaming allowed to a simple locked port
+locked_port_station_move()
+{
+	local mac=a0:b0:c0:c0:b0:a0
+
+	RET=0
+	check_locked_port_support || return 0
+
+	bridge link set dev $swp1 locked on
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master br0"
+	check_fail $? "Locked port station move: FDB entry on first injection"
+
+	$MZ $h2 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "master br0"
+	check_err $? "Locked port station move: Entry not found on unlocked port"
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master br0"
+	check_fail $? "Locked port station move: entry roamed to locked port"
+
+	bridge link set dev $swp1 locked off
+
+	log_test "Locked port station move"
+}
+
+# Roaming to and from a MAB enabled port should work if sticky flag is not set
+locked_port_mab_station_move()
+{
+	local mac=10:20:30:30:20:10
+
+	RET=0
+	check_locked_port_support || return 0
+
+	bridge link set dev $swp1 locked on
+
+	check_port_mab_support $swp1 || return 0
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	if bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "permanent"; then
+		echo "SKIP: Roaming not possible with local flag, skipping test..."
+		bridge link set dev $swp1 locked off mab off
+		return $ksft_skip
+	fi
+
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked"
+	check_err $? "MAB station move: no locked entry on first injection"
+
+	$MZ $h2 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked"
+	check_fail $? "MAB station move: locked entry did not move"
+
+	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "locked"
+	check_fail $? "MAB station move: roamed entry to unlocked port had locked flag on"
+
+	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "master br0"
+	check_err $? "MAB station move: roamed entry not found"
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep "master br0" | grep -q "locked"
+	check_fail $? "MAB station move: entry roamed back to locked port"
+
+	bridge link set dev $swp1 locked off mab off
+
+	log_test "Locked port MAB station move"
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
index 1f8ef0eff862..bca77bc3fe09 100755
--- a/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="sticky"
+ALL_TESTS="sticky sticky_no_roaming"
 NUM_NETIFS=4
 TEST_MAC=de:ad:be:ef:13:37
 source lib.sh
@@ -59,6 +59,25 @@ sticky()
 	log_test "Sticky fdb entry"
 }
 
+# No roaming allowed with the sticky flag set
+sticky_no_roaming()
+{
+	local mac=a8:b4:c2:c2:b4:a8
+
+	RET=0
+
+	bridge link set dev $swp2 learning on
+	bridge fdb add $mac dev $swp1 master static sticky
+	bridge fdb show dev $swp1 | grep "$mac master br0" | grep -q sticky
+	check_err $? "Sticky no roaming: No sticky FDB entry found after adding"
+
+	$MZ $h2 -q -t udp -c 10 -d 100msec -a $mac -b rand
+	bridge fdb show dev $swp2 | grep "$mac master br0" | grep -q sticky
+	check_fail $? "Sticky no roaming: Sticky entry roamed"
+
+	log_test "Sticky no roaming"
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 3ffb9d6c0950..642fbf217c20 100755
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -137,6 +137,24 @@ check_locked_port_support()
 	fi
 }
 
+check_port_mab_support()
+{
+	local dev=$1;
+
+	if ! bridge link set dev $dev mab on 2>/dev/null; then
+		echo "SKIP: iproute2 too old; MacAuth feature not supported."
+		return $ksft_skip
+	fi
+}
+
+check_blackhole_fdb_support()
+{
+	if ! bridge fdb help | grep -q "blackhole"; then
+		echo "SKIP: Blackhole fdb feature not supported."
+		return $ksft_skip
+	fi
+}
+
 if [[ "$(id -u)" -ne 0 ]]; then
 	echo "SKIP: need root privileges"
 	exit $ksft_skip
-- 
2.34.1

[Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Hans Schultz]

From: "Hans J. Schultz" <netdev@kapio-technology.com>

Verify that the MAC-Auth mechanism works by adding a FDB entry with the
locked flag set, denying access until the FDB entry is replaced with a
FDB entry without the locked flag set.

Add test of blackhole fdb entries, verifying that there is no forwarding
to a blackhole entry from any port, and that the blackhole entry can be
replaced.

Also add a test that verifies that sticky FDB entries cannot roam (this
is not needed for now, but should in general be present anyhow for future
applications).

Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com>
---
 .../net/forwarding/bridge_blackhole_fdb.sh    | 102 +++++++++++++++++
 .../net/forwarding/bridge_locked_port.sh      | 106 +++++++++++++++++-
 .../net/forwarding/bridge_sticky_fdb.sh       |  21 +++-
 tools/testing/selftests/net/forwarding/lib.sh |  18 +++
 4 files changed, 245 insertions(+), 2 deletions(-)
 create mode 100755 tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh

diff --git a/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
new file mode 100755
index 000000000000..54b1a51e1ed6
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="blackhole_fdb"
+NUM_NETIFS=4
+source lib.sh
+
+switch_create()
+{
+        ip link add dev br0 type bridge
+
+        ip link set dev $swp1 master br0
+        ip link set dev $swp2 master br0
+
+        ip link set dev br0 up
+        ip link set dev $h1 up
+        ip link set dev $swp1 up
+        ip link set dev $h2 up
+        ip link set dev $swp2 up
+
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+
+        ip link set dev $swp2 down
+        ip link set dev $h2 down
+        ip link set dev $swp1 down
+        ip link set dev $h1 down
+
+        ip link del dev br0
+}
+
+setup_prepare()
+{
+        h1=${NETIFS[p1]}
+        swp1=${NETIFS[p2]}
+        h2=${NETIFS[p3]}
+        swp2=${NETIFS[p4]}
+
+        switch_create
+}
+
+cleanup()
+{
+        pre_cleanup
+        switch_destroy
+}
+
+# Check that there is no egress with blackhole entry and that blackhole entries can be replaced
+blackhole_fdb()
+{
+        RET=0
+
+	check_blackhole_fdb_support || return 0
+
+	tc filter add dev $swp2 egress protocol ip pref 1 handle 1 flower \
+		dst_ip 192.0.2.2 ip_proto udp dst_port 12345 action pass
+
+	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
+		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
+
+	tc_check_packets "dev $swp2 egress" 1 1
+	check_err $? "Packet not seen on egress before adding blackhole entry"
+
+	bridge fdb add `mac_get $h2` dev br0 blackhole
+	bridge fdb get `mac_get $h2` br br0 | grep -q blackhole
+	check_err $? "Blackhole entry not found"
+
+	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
+		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
+
+	tc_check_packets "dev $swp2 egress" 1 1
+	check_err $? "Packet seen on egress after adding blackhole entry"
+
+	# Check blackhole entries can be replaced.
+	bridge fdb replace `mac_get $h2` dev $swp2 master static
+	bridge fdb get `mac_get $h2` br br0 | grep -q blackhole
+	check_fail $? "Blackhole entry found after replacement"
+
+	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
+		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
+
+	tc_check_packets "dev $swp2 egress" 1 2
+	check_err $? "Packet not seen on egress after replacing blackhole entry"
+
+	bridge fdb del `mac_get $h2` dev $swp2 master static
+	tc filter del dev $swp2 egress protocol ip pref 1 handle 1 flower
+
+        log_test "Blackhole FDB entry"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
index 5b02b6b60ce7..59b8b7666eab 100755
--- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
@@ -1,7 +1,15 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="locked_port_ipv4 locked_port_ipv6 locked_port_vlan"
+ALL_TESTS="
+	locked_port_ipv4
+	locked_port_ipv6
+	locked_port_vlan
+	locked_port_mab
+	locked_port_station_move
+	locked_port_mab_station_move
+"
+
 NUM_NETIFS=4
 CHECK_TC="no"
 source lib.sh
@@ -166,6 +174,102 @@ locked_port_ipv6()
 	log_test "Locked port ipv6"
 }
 
+locked_port_mab()
+{
+	RET=0
+	check_locked_port_support || return 0
+
+	ping_do $h1 192.0.2.2
+	check_err $? "MAB: Ping did not work before locking port"
+
+	bridge link set dev $swp1 locked on
+	check_port_mab_support $swp1 || return 0
+
+	ping_do $h1 192.0.2.2
+	check_fail $? "MAB: Ping worked on locked port without FDB entry"
+
+	bridge fdb show | grep `mac_get $h1` | grep -q "locked"
+	check_err $? "MAB: No locked fdb entry after ping on locked port"
+
+	bridge fdb replace `mac_get $h1` dev $swp1 master static
+
+	ping_do $h1 192.0.2.2
+	check_err $? "MAB: Ping did not work with fdb entry without locked flag"
+
+	bridge fdb del `mac_get $h1` dev $swp1 master
+	bridge link set dev $swp1 locked off mab off
+
+	log_test "Locked port MAB"
+}
+
+# No roaming allowed to a simple locked port
+locked_port_station_move()
+{
+	local mac=a0:b0:c0:c0:b0:a0
+
+	RET=0
+	check_locked_port_support || return 0
+
+	bridge link set dev $swp1 locked on
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master br0"
+	check_fail $? "Locked port station move: FDB entry on first injection"
+
+	$MZ $h2 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "master br0"
+	check_err $? "Locked port station move: Entry not found on unlocked port"
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master br0"
+	check_fail $? "Locked port station move: entry roamed to locked port"
+
+	bridge link set dev $swp1 locked off
+
+	log_test "Locked port station move"
+}
+
+# Roaming to and from a MAB enabled port should work if sticky flag is not set
+locked_port_mab_station_move()
+{
+	local mac=10:20:30:30:20:10
+
+	RET=0
+	check_locked_port_support || return 0
+
+	bridge link set dev $swp1 locked on
+
+	check_port_mab_support $swp1 || return 0
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	if bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "permanent"; then
+		echo "SKIP: Roaming not possible with local flag, skipping test..."
+		bridge link set dev $swp1 locked off mab off
+		return $ksft_skip
+	fi
+
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked"
+	check_err $? "MAB station move: no locked entry on first injection"
+
+	$MZ $h2 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked"
+	check_fail $? "MAB station move: locked entry did not move"
+
+	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "locked"
+	check_fail $? "MAB station move: roamed entry to unlocked port had locked flag on"
+
+	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "master br0"
+	check_err $? "MAB station move: roamed entry not found"
+
+	$MZ $h1 -q -t udp -a $mac -b rand
+	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep "master br0" | grep -q "locked"
+	check_fail $? "MAB station move: entry roamed back to locked port"
+
+	bridge link set dev $swp1 locked off mab off
+
+	log_test "Locked port MAB station move"
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
index 1f8ef0eff862..bca77bc3fe09 100755
--- a/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="sticky"
+ALL_TESTS="sticky sticky_no_roaming"
 NUM_NETIFS=4
 TEST_MAC=de:ad:be:ef:13:37
 source lib.sh
@@ -59,6 +59,25 @@ sticky()
 	log_test "Sticky fdb entry"
 }
 
+# No roaming allowed with the sticky flag set
+sticky_no_roaming()
+{
+	local mac=a8:b4:c2:c2:b4:a8
+
+	RET=0
+
+	bridge link set dev $swp2 learning on
+	bridge fdb add $mac dev $swp1 master static sticky
+	bridge fdb show dev $swp1 | grep "$mac master br0" | grep -q sticky
+	check_err $? "Sticky no roaming: No sticky FDB entry found after adding"
+
+	$MZ $h2 -q -t udp -c 10 -d 100msec -a $mac -b rand
+	bridge fdb show dev $swp2 | grep "$mac master br0" | grep -q sticky
+	check_fail $? "Sticky no roaming: Sticky entry roamed"
+
+	log_test "Sticky no roaming"
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 3ffb9d6c0950..642fbf217c20 100755
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -137,6 +137,24 @@ check_locked_port_support()
 	fi
 }
 
+check_port_mab_support()
+{
+	local dev=$1;
+
+	if ! bridge link set dev $dev mab on 2>/dev/null; then
+		echo "SKIP: iproute2 too old; MacAuth feature not supported."
+		return $ksft_skip
+	fi
+}
+
+check_blackhole_fdb_support()
+{
+	if ! bridge fdb help | grep -q "blackhole"; then
+		echo "SKIP: Blackhole fdb feature not supported."
+		return $ksft_skip
+	fi
+}
+
 if [[ "$(id -u)" -ne 0 ]]; then
 	echo "SKIP: need root privileges"
 	exit $ksft_skip
-- 
2.34.1

Re: [Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Jakub Kicinski]

On Wed, 28 Sep 2022 19:49:04 +0200 Hans Schultz wrote:
> From: "Hans J. Schultz" <netdev@kapio-technology.com>
> 
> Verify that the MAC-Auth mechanism works by adding a FDB entry with the
> locked flag set, denying access until the FDB entry is replaced with a
> FDB entry without the locked flag set.
> 
> Add test of blackhole fdb entries, verifying that there is no forwarding
> to a blackhole entry from any port, and that the blackhole entry can be
> replaced.
> 
> Also add a test that verifies that sticky FDB entries cannot roam (this
> is not needed for now, but should in general be present anyhow for future
> applications).

If you were trying to repost just the broken patches - that's not gonna
work :(

Re: [Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[netdev]

On 2022-09-29 18:11, Jakub Kicinski wrote:
> On Wed, 28 Sep 2022 19:49:04 +0200 Hans Schultz wrote:
>> From: "Hans J. Schultz" <netdev@kapio-technology.com>
>> 
>> Verify that the MAC-Auth mechanism works by adding a FDB entry with 
>> the
>> locked flag set, denying access until the FDB entry is replaced with a
>> FDB entry without the locked flag set.
>> 
>> Add test of blackhole fdb entries, verifying that there is no 
>> forwarding
>> to a blackhole entry from any port, and that the blackhole entry can 
>> be
>> replaced.
>> 
>> Also add a test that verifies that sticky FDB entries cannot roam 
>> (this
>> is not needed for now, but should in general be present anyhow for 
>> future
>> applications).
> 
> If you were trying to repost just the broken patches - that's not gonna
> work :(

Sorry, I do not understand what 'broken' patches you are referring to?

I think that the locked port tests should be working?

Re: [Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Jakub Kicinski]

On Thu, 29 Sep 2022 18:17:40 +0200 netdev@kapio-technology.com wrote:
> > If you were trying to repost just the broken patches - that's not gonna
> > work :(  
> 
> Sorry, I do not understand what 'broken' patches you are referring to?
> 
> I think that the locked port tests should be working?

Ignore it then. v6 does not build, see my other reply.

Re: [Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[Ido Schimmel]

On Wed, Sep 28, 2022 at 05:02:56PM +0200, Hans Schultz wrote:
> From: "Hans J. Schultz" <netdev@kapio-technology.com>
> 
> Verify that the MAC-Auth mechanism works by adding a FDB entry with the
> locked flag set, denying access until the FDB entry is replaced with a
> FDB entry without the locked flag set.
> 
> Add test of blackhole fdb entries, verifying that there is no forwarding
> to a blackhole entry from any port, and that the blackhole entry can be
> replaced.
> 
> Also add a test that verifies that sticky FDB entries cannot roam (this
> is not needed for now, but should in general be present anyhow for future
> applications).

The sticky selftests are not related to this set and need to be posted
separately.

> 
> Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com>
> ---
>  .../net/forwarding/bridge_blackhole_fdb.sh    | 102 +++++++++++++++++
>  .../net/forwarding/bridge_locked_port.sh      | 106 +++++++++++++++++-
>  .../net/forwarding/bridge_sticky_fdb.sh       |  21 +++-
>  tools/testing/selftests/net/forwarding/lib.sh |  18 +++
>  4 files changed, 245 insertions(+), 2 deletions(-)
>  create mode 100755 tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
> 
> diff --git a/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
> new file mode 100755
> index 000000000000..54b1a51e1ed6
> --- /dev/null
> +++ b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh
> @@ -0,0 +1,102 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +ALL_TESTS="blackhole_fdb"
> +NUM_NETIFS=4
> +source lib.sh
> +
> +switch_create()
> +{
> +        ip link add dev br0 type bridge
> +
> +        ip link set dev $swp1 master br0
> +        ip link set dev $swp2 master br0
> +
> +        ip link set dev br0 up
> +        ip link set dev $h1 up
> +        ip link set dev $swp1 up
> +        ip link set dev $h2 up
> +        ip link set dev $swp2 up
> +
> +	tc qdisc add dev $swp2 clsact

There are indentation problems in this file. The coding style is to
indent using tabs that are 8 characters deep, not spaces.

> +}

This is not how the selftests are usually constructed. We have
h1_create(), h2_create() and switch_create() and the hosts use VRFs via
simple_if_init(). Look at bridge_locked_port.sh, for example.

> +
> +switch_destroy()
> +{
> +	tc qdisc del dev $swp2 clsact
> +
> +        ip link set dev $swp2 down
> +        ip link set dev $h2 down
> +        ip link set dev $swp1 down
> +        ip link set dev $h1 down
> +
> +        ip link del dev br0
> +}
> +
> +setup_prepare()
> +{
> +        h1=${NETIFS[p1]}
> +        swp1=${NETIFS[p2]}
> +        h2=${NETIFS[p3]}
> +        swp2=${NETIFS[p4]}
> +
> +        switch_create
> +}
> +
> +cleanup()
> +{
> +        pre_cleanup
> +        switch_destroy
> +}
> +
> +# Check that there is no egress with blackhole entry and that blackhole entries can be replaced
> +blackhole_fdb()
> +{
> +        RET=0
> +
> +	check_blackhole_fdb_support || return 0
> +
> +	tc filter add dev $swp2 egress protocol ip pref 1 handle 1 flower \
> +		dst_ip 192.0.2.2 ip_proto udp dst_port 12345 action pass
> +
> +	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
> +		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
> +
> +	tc_check_packets "dev $swp2 egress" 1 1
> +	check_err $? "Packet not seen on egress before adding blackhole entry"
> +
> +	bridge fdb add `mac_get $h2` dev br0 blackhole
> +	bridge fdb get `mac_get $h2` br br0 | grep -q blackhole
> +	check_err $? "Blackhole entry not found"
> +
> +	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
> +		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
> +
> +	tc_check_packets "dev $swp2 egress" 1 1
> +	check_err $? "Packet seen on egress after adding blackhole entry"
> +
> +	# Check blackhole entries can be replaced.
> +	bridge fdb replace `mac_get $h2` dev $swp2 master static
> +	bridge fdb get `mac_get $h2` br br0 | grep -q blackhole
> +	check_fail $? "Blackhole entry found after replacement"
> +
> +	$MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \
> +		-a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q
> +
> +	tc_check_packets "dev $swp2 egress" 1 2
> +	check_err $? "Packet not seen on egress after replacing blackhole entry"
> +
> +	bridge fdb del `mac_get $h2` dev $swp2 master static
> +	tc filter del dev $swp2 egress protocol ip pref 1 handle 1 flower
> +
> +        log_test "Blackhole FDB entry"
> +}
> +
> +trap cleanup EXIT
> +
> +setup_prepare
> +setup_wait
> +
> +tests_run
> +
> +exit $EXIT_STATUS
> diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
> index 5b02b6b60ce7..59b8b7666eab 100755
> --- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
> +++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
> @@ -1,7 +1,15 @@
>  #!/bin/bash
>  # SPDX-License-Identifier: GPL-2.0
>  
> -ALL_TESTS="locked_port_ipv4 locked_port_ipv6 locked_port_vlan"
> +ALL_TESTS="
> +	locked_port_ipv4
> +	locked_port_ipv6
> +	locked_port_vlan
> +	locked_port_mab
> +	locked_port_station_move
> +	locked_port_mab_station_move
> +"
> +
>  NUM_NETIFS=4
>  CHECK_TC="no"
>  source lib.sh
> @@ -166,6 +174,102 @@ locked_port_ipv6()
>  	log_test "Locked port ipv6"
>  }
>  
> +locked_port_mab()
> +{
> +	RET=0
> +	check_locked_port_support || return 0
> +
> +	ping_do $h1 192.0.2.2
> +	check_err $? "MAB: Ping did not work before locking port"
> +
> +	bridge link set dev $swp1 locked on
> +	check_port_mab_support $swp1 || return 0

Move this check to the beginning of the test and instead do:

bridge link set dev $swp1 locked on mab on

See the comment at the end regarding check_port_mab_support()

> +
> +	ping_do $h1 192.0.2.2
> +	check_fail $? "MAB: Ping worked on locked port without FDB entry"
> +
> +	bridge fdb show | grep `mac_get $h1` | grep -q "locked"

Use "bridge fdb get" like in the blackhole test instead of dumping the
entire FDB.

> +	check_err $? "MAB: No locked fdb entry after ping on locked port"
> +
> +	bridge fdb replace `mac_get $h1` dev $swp1 master static
> +
> +	ping_do $h1 192.0.2.2
> +	check_err $? "MAB: Ping did not work with fdb entry without locked flag"
> +
> +	bridge fdb del `mac_get $h1` dev $swp1 master
> +	bridge link set dev $swp1 locked off mab off
> +
> +	log_test "Locked port MAB"
> +}
> +
> +# No roaming allowed to a simple locked port

# Check that entries cannot roam from an unlocked port to a locked port.

> +locked_port_station_move()
> +{
> +	local mac=a0:b0:c0:c0:b0:a0
> +
> +	RET=0
> +	check_locked_port_support || return 0
> +
> +	bridge link set dev $swp1 locked on

It is quite pointless to check that an entry cannot roam to a port that
has learning disabled... Need:

bridge link set dev $swp1 locked on learning on

> +
> +	$MZ $h1 -q -t udp -a $mac -b rand
> +	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master br0"

bridge fdb get ...

Same in other places

> +	check_fail $? "Locked port station move: FDB entry on first injection"
> +
> +	$MZ $h2 -q -t udp -a $mac -b rand
> +	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "master br0"
> +	check_err $? "Locked port station move: Entry not found on unlocked port"
> +
> +	$MZ $h1 -q -t udp -a $mac -b rand
> +	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master br0"
> +	check_fail $? "Locked port station move: entry roamed to locked port"
> +
> +	bridge link set dev $swp1 locked off

bridge link set dev $swp1 locked off learning off

And need to delete the FDB entry pointing to $swp2

> +
> +	log_test "Locked port station move"
> +}
> +
> +# Roaming to and from a MAB enabled port should work if sticky flag is not set

# Check that entries can roam from a locked port to an unlocked port.

> +locked_port_mab_station_move()
> +{
> +	local mac=10:20:30:30:20:10
> +
> +	RET=0
> +	check_locked_port_support || return 0
> +
> +	bridge link set dev $swp1 locked on
> +
> +	check_port_mab_support $swp1 || return 0

Move to the beginning of the test

> +
> +	$MZ $h1 -q -t udp -a $mac -b rand

# Some device drivers report locked entries to the bridge driver as
# permanent entries that cannot roam. In such cases there is no point in
# checking that locked entries can roam to an unlocked port.

> +	if bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "permanent"; then
> +		echo "SKIP: Roaming not possible with local flag, skipping test..."
> +		bridge link set dev $swp1 locked off mab off
> +		return $ksft_skip
> +	fi
> +
> +	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked"
> +	check_err $? "MAB station move: no locked entry on first injection"
> +
> +	$MZ $h2 -q -t udp -a $mac -b rand
> +	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked"
> +	check_fail $? "MAB station move: locked entry did not move"
> +
> +	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "locked"
> +	check_fail $? "MAB station move: roamed entry to unlocked port had locked flag on"
> +
> +	bridge fdb show dev $swp2 | grep "$mac vlan 1" | grep -q "master br0"
> +	check_err $? "MAB station move: roamed entry not found"

First check that the entry roamed to $swp2 using "bridge fdb get", then
check that the locked flag is not set on it.

> +
> +	$MZ $h1 -q -t udp -a $mac -b rand
> +	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep "master br0" | grep -q "locked"
> +	check_fail $? "MAB station move: entry roamed back to locked port"

This was already checked in locked_port_station_move()

> +

Need to delete the FBD entry from $swp2.

> +	bridge link set dev $swp1 locked off mab off
> +
> +	log_test "Locked port MAB station move"
> +}
> +
>  trap cleanup EXIT

[...]

> diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
> index 3ffb9d6c0950..642fbf217c20 100755
> --- a/tools/testing/selftests/net/forwarding/lib.sh
> +++ b/tools/testing/selftests/net/forwarding/lib.sh
> @@ -137,6 +137,24 @@ check_locked_port_support()
>  	fi
>  }
>  
> +check_port_mab_support()
> +{
> +	local dev=$1;

Why this helper needs a device, but check_locked_port_support() does
not? Please change this helper to work like check_locked_port_support().

> +
> +	if ! bridge link set dev $dev mab on 2>/dev/null; then
> +		echo "SKIP: iproute2 too old; MacAuth feature not supported."
> +		return $ksft_skip
> +	fi
> +}

Re: [Bridge] [PATCH v6 net-next 9/9] selftests: forwarding: add test of MAC-Auth Bypass to locked port tests

[netdev]

On 2022-10-03 15:40, Ido Schimmel wrote:
>> +locked_port_station_move()
>> +{
>> +	local mac=a0:b0:c0:c0:b0:a0
>> +
>> +	RET=0
>> +	check_locked_port_support || return 0
>> +
>> +	bridge link set dev $swp1 locked on
> 
> It is quite pointless to check that an entry cannot roam to a port that
> has learning disabled... Need:
> 
> bridge link set dev $swp1 locked on learning on
> 
>> +
>> +	$MZ $h1 -q -t udp -a $mac -b rand
>> +	bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "master 
>> br0"
> 
> bridge fdb get ...
> 
> Same in other places
> 

It seems that the output of 'bridge fdb get' does not respect the dev it 
is given as input and outputs the (MAC,vlan) when found on another 
dev...