Ethernet Bridge development
 help / color / mirror / Atom feed
From: "Nicolas de Pesloüan" <nicolas.2p.debian@free.fr>
To: Jochen Hebbrecht <jochenhebbrecht@gmail.com>,
	bridge@lists.linux-foundation.org
Subject: Re: [Bridge] Ubuntu: network bridging between wireless and wired connection fails
Date: Mon, 04 May 2009 22:07:20 +0200	[thread overview]
Message-ID: <49FF4AF8.1050801@free.fr> (raw)
In-Reply-To: <49FF41C4.4090404@gmail.com>

Jochen Hebbrecht wrote:
> Maybe my picture isn't very clear, but my WAN access is on location A. 
> There's a router which receives an ip from the ISP. On the other side, 
> I'm having a 192.168.1.0/24 network

> $ cat /etc/network/interfaces
> auto lo
> iface lo inet loopback
> 
> auto eth1
> iface eth1 inet manual
> wpa-driver wext
> wpa-ssid ##SSID##
> wpa-ap-scan 1
> wpa-proto RSN
> wpa-pairwise CCMP
> wpa-group CCMP
> wpa-key-mgmt WPA-PSK
> wpa-psk ##PSK KEY##
> 
> auto br0
> iface br0 inet static
> bridge_ports eth1
> address 192.168.1.111
> netmask 255.255.255.0
> gateway 192.168.1.1
> 

> $ ping 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
>  From 192.168.1.111 icmp_seq=2 Destination Host Unreachable
>  From 192.168.1.111 icmp_seq=3 Destination Host Unreachable
>  From 192.168.1.111 icmp_seq=5 Destination Host Unreachable
>  From 192.168.1.111 icmp_seq=6 Destination Host Unreachable
> 
> So here it goes wrong. I didn't execute any other steps as step 2 fails 

I think that the "Destination Host Unreachable" is caused by some sort 
of "down link", because wpa_supplicant failed to establish the wifi 
link. When eth1 is part of the br0, packets received on eth1 is 
"forwarded" to br0 and not available on eth1. So wpa_supplicant must be 
instructed to listen for incoming packets on br0, not on eth1.

Can you try the exact same configuration, adding wpa-bridge br0 in the 
eth1 stanza, to inform wpa_supplicant where to listen from ?

auto lo
iface lo inet loopback

auto eth1
iface eth1 inet manual
wpa-driver wext
wpa-ssid ##SSID##
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk ##PSK KEY##
wpa-bridge br0          <--- HERE.

auto br0
iface br0 inet static
bridge_ports eth1
address 192.168.1.111
netmask 255.255.255.0
gateway 192.168.1.1

If this fail, please provide the output of i_w_config eth1 and arp -an.

	Nicolas.

  parent reply	other threads:[~2009-05-04 20:07 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-27 21:13 [Bridge] Ubuntu: network bridging between wireless and wired connection fails Jochen Hebbrecht
2009-04-27 21:36 ` richardvoigt
2009-04-28  6:44   ` Jochen Hebbrecht
2009-04-28 12:40     ` Ross Vandegrift
2009-04-28 12:52       ` Jochen Hebbrecht
2009-04-28 13:37         ` Ross Vandegrift
2009-04-28 17:36           ` Jochen Hebbrecht
2009-04-28 19:00             ` richardvoigt
2009-04-28 21:16               ` Jochen Hebbrecht
2009-04-28 23:00                 ` richardvoigt
2009-04-29 16:16                   ` Jochen Hebbrecht
2009-04-29 16:26                     ` Ross Vandegrift
2009-04-29 16:40                       ` Jochen Hebbrecht
2009-04-29 16:53                         ` Ross Vandegrift
2009-04-29 21:21                           ` Jochen Hebbrecht
2009-04-30  4:18                             ` richardvoigt
2009-04-30  6:30                               ` Jochen Hebbrecht
2009-04-30 21:54                                 ` Nicolas de Pesloüan
2009-05-02 13:15                                   ` Jochen Hebbrecht
2009-05-03 17:46                                     ` Nicolas de Pesloüan
2009-05-04  3:59                                       ` richardvoigt
2009-05-04 19:29                                         ` Jochen Hebbrecht
2009-05-04 19:28                                       ` Jochen Hebbrecht
2009-05-04 19:34                                         ` Nicolas de Pesloüan
2009-05-04 19:42                                           ` Jochen Hebbrecht
2009-05-04 20:07                                         ` Nicolas de Pesloüan [this message]
2009-05-04 21:06                                           ` Jochen Hebbrecht
2009-05-04 23:33                                             ` richardvoigt
2009-05-05  5:49                                               ` Nicolas de Pesloüan
2009-05-05 16:59                                                 ` Jochen Hebbrecht
2009-05-05  6:20                                             ` Nicolas de Pesloüan
2009-05-05 17:01                                               ` Jochen Hebbrecht
2009-05-05 18:08                                                 ` richardvoigt
2009-05-05 19:19                                                   ` Jochen Hebbrecht
2009-05-05 19:53                                                     ` Jonathan Thibault
2009-05-05 20:52                                                       ` Jochen Hebbrecht
2009-05-05 21:44                                                 ` Nicolas de Pesloüan
2009-05-06  6:57                                                   ` Jochen Hebbrecht
2009-05-06 15:37                                                   ` Jochen Hebbrecht
2009-05-06 16:55                                                     ` Jonathan Thibault
2009-05-09 11:15                                                       ` Jochen Hebbrecht
2009-05-06 16:47                                                   ` Jochen Hebbrecht
2009-05-06 20:07                                                     ` Nicolas de Pesloüan
2009-05-09 11:17                                                       ` Jochen Hebbrecht
2009-05-09 23:30                                                         ` richardvoigt
2009-05-10 15:39                                                         ` Nicolas de Pesloüan
2009-04-29 16:41                       ` Jochen Hebbrecht

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49FF4AF8.1050801@free.fr \
    --to=nicolas.2p.debian@free.fr \
    --cc=bridge@lists.linux-foundation.org \
    --cc=jochenhebbrecht@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox