Re: [Bridge] [PATCH v4 net-next 3/6] drivers: net: dsa: add locked fdb entry flag to drivers

[Ido Schimmel <idosch@nvidia.com>]

On Tue, Aug 23, 2022 at 09:13:54AM +0200, netdev@kapio-technology.com wrote:
> On 2022-08-23 08:48, Ido Schimmel wrote:
> > On Mon, Aug 22, 2022 at 09:49:28AM +0200, netdev@kapio-technology.com
> > wrote:
> 
> > > As I am not familiar with roaming in this context, I need to know
> > > how the SW
> > > bridge should behave in this case.
> > 
> 
> > > In this case, is the roaming only between locked ports or does the
> > > roaming include that the entry can move to a unlocked port, resulting
> > > in the locked flag getting removed?
> > 
> > Any two ports. If the "locked" entry in mv88e6xxx cannot move once
> > installed, then the "sticky" flag accurately describes it.
> > 
> 
> But since I am also doing the SW bridge implementation without mv88e6xxx I
> need it to function according to needs.
> Thus the locked entries created in the bridge I shall not put the sticky
> flag on, but there will be the situation where a locked entry can move to an
> unlocked port, which we regarded as a bug. 

I do not regard this as a bug. It makes sense to me that an authorized
port can cause an entry pointing to an unauthorized port to roam to
itself. Just like normal learned entries. What I considered as a bug is
the fact that the "locked" flag is not cleared when roaming to an
authorized port.

> In that case there is two possibilities, the locked entry can move to
> an unlocked port with the locked flag being removed or the locked
> entry can only move to another locked port?

My suggestion is to allow roaming and maintain / clear the "locked" flag
based on whether the new destination port is locked or not.