From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stuart Wood Date: Tue, 5 Jun 2007 10:56:21 -0400 Subject: [Buildroot] STILL soft float toolchain problems on ARM In-Reply-To: <20070605082606.GC30837@aon.at> Message-ID: <000001c7a781$ae01ecd0$0801fea9@SDW> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Paolo, I've found that when changing some of the build options you need to make sure you do a make clean and then remove the build_arm_nofpu and toolchain_build_arm_nofpu directories because they are not always purged properly. Don't get discouraged, I'm also working on the EP9302 and am not utilizing the FPU. Here is my config. Stuart -----Original Message----- From: buildroot-bounces@uclibc.org [mailto:buildroot-bounces at uclibc.org] On Behalf Of Bernhard Fischer Sent: Tuesday, June 05, 2007 4:26 AM To: Paolo Scaffardi Cc: buildroot at uclibc.org Subject: Re: [Buildroot] STILL soft float toolchain problems on ARM On Tue, Jun 05, 2007 at 10:18:00AM +0200, Paolo Scaffardi wrote: >Bernhard Fischer ha scritto: >> On Tue, Jun 05, 2007 at 08:42:17AM +0200, Paolo Scaffardi wrote: >>> Hi there! >>> I'm still trying to get a working buildroot for my ARM platform >>> (EP9302 cirrus logic CPU, T920), with soft float enabled. My >>> configuration uses GCC 4.1.2, libfloat, soft float and uclibc 0.9.29 >>> (i tried both snapshots and 0.9.29 official release). >> >> I flagged several such reports with FLOAT in the subject. Can you >> provide me with a kernel-config that i can use with qemu that does: >> 1) use xscale (but t920 t926 should do too, if you prefer) >> 2) have framebuffer support >> 3) is noMMU >> 4) wants soft-float > >I cannot provide such kernel config because i dont use XScale, but >cirrus ep93xx. I dont understand why are you using QEMU to test >these... I'm using qemu because i don't have such hardware, that simple ;) If i don't have a kernel that i can use for testing, i'm not interrested, thanks. >I'm simply trying to compile last buildroot snapshot WITHOUT changing >any kernel configuration. good luck _______________________________________________ buildroot mailing list buildroot at uclibc.org http://busybox.net/mailman/listinfo/buildroot -------------- next part -------------- A non-text attachment was scrubbed... Name: EP9302.config Type: application/octet-stream Size: 13212 bytes Desc: not available Url : http://busybox.net/lists/buildroot/attachments/20070605/6924e314/attachment.obj