From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Samuelsson Date: Fri, 26 Jan 2007 19:45:39 +0100 Subject: [Buildroot] Using external toolchain / disabling Buildroottoolchain References: Message-ID: <02a401c7417c$928c0af0$01c4af0a@atmel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net MikeW wrote: > MikeW writes: > >> >> Buildroot cannot build a required toolchain, but I would still like >> to use it to build everything else. >> >> Is there a preferred way to disable building the toolchain, and to >> set Buildroot to use an external toolchain instead ? It would be good to specify a toolchain once, and be done with it, so you don't have to rebuild the toolchain every time you start on a new version of buildroot. >> (This is 'inside-out' from the BR docs which say how to use the BR >> toolchain from outside.) >> >> Looking at the top-level Makefile, this looks as if it would involve >> edits to the file(s). >> >> Regards, >> MikeW >> > > Looks like there's a possible patch here > http://bugs.uclibc.org/view.php?id=237 > > Don't you wish there was a 'patch gallery' ?! > > MikeW > > > > _______________________________________________ > buildroot mailing list > buildroot at uclibc.org > http://busybox.net/mailman/listinfo/buildroot Best Regards, Ulf Samuelsson ulf at atmel.com GSM: +46 (706) 22 44 57 Tel: +46 (8) 441 54 22 Fax: +46 (8) 441 54 29 Mail: Box 2033 174 02 Sundbyberg Visit: Kavalleriv?gen 24 174 58 Sundbyberg' Sweden