From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Samuelsson Date: Wed, 5 Mar 2008 21:07:06 +0100 Subject: [Buildroot] Buildroot on Kwikbyte KBAT9261 References: <6090c5eb0803051137xd753f7ax3db33d595f037e96@mail.gmail.com> Message-ID: <036c01c87f00$dc470ab0$0c0514ac@atmel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net > Dear all, > > I've just ordered one KBAT9261 from kwikbyte, wich is AT91SAM9261 based, i'm > just planning to build a custom board based on the AT91SAM9261 and use it as > an HMI. > > Somebody here tested buildroot on an AT91SAM9261? There is support for the AT91SAM9261EK, but it is less tested than the SAM9260/63. Don't know the H/W of the KBAT9261, but if it has a dataflash then you should probably be OK. There is very little support in Buildroot for AT91 with parallel flash. > Does it works to build any kind of Xserver? X is not well supported in Buildroot. Three versions, but I have not succeeded in building any of them. > Any library available on buildroot to use on my graphical applications? > DirectFB ?` > Thanks in advance for your time. > > Regards, > > Jorge. > Best Regards Ulf Samuelsson ulf at atmel.com Atmel Nordic AB Mail: Box 2033, 174 02 Sundbyberg, Sweden Visit: Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden Phone +46 (8) 441 54 22 Fax +46 (8) 441 54 29 GSM +46 (706) 22 44 57