From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brian Austin Date: Tue, 02 Oct 2007 16:51:40 -0500 Subject: [Buildroot] Adding Cirrus EP93XX ARM to buildroot Message-ID: <1191361900.4187.48.camel@localhost.localdomain> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net All, I would like to start the process of adding the Cirrus Logic EP93XX ARM9 family to buildroot. couple things about the 93xx. 1. Maverick Crunch FPU. I have patches for GCC/uClibc to enable Crunch FPU. 2. Linux Kernel. We have a patch for several current kernel versions up to 2.6.21.5. I also have patches for DirectFB which I submitted last week and QT, TSLIB, and other BSP software which have not been submitted. I also think there is a section for bootloaders as well? Qustion is, where to start? Right now we give out a modified version of buildroot for the prebuilt toolchain and a buildroot system for building the kernel, u-boot, redboot (ecos), and BSP software. But I want it to go into ya'lls to make things more consistent. it's hard for me to do everything here. We use DirectFB/GTK now for our graphics and I had to change alot to get it to build and install correctly to pass SQA testing, so hopefully that can be of use as well. anyway comments and suggestions on where to start would be great. Regards, Brian Austin Cirrus Logic Inc.