From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Fri, 04 Apr 2008 14:14:32 +0200
Subject: [Buildroot] Flash for AT91RM9200
In-Reply-To: <6090c5eb0804040452s11dc749m4fb3c1e44c341295@mail.gmail.com>
References: <039401c895a7$61f39304$85f0af0a@corp.atmel.com>
	<6090c5eb0804040452s11dc749m4fb3c1e44c341295@mail.gmail.com>
Message-ID: <1207311272.1106.4.camel@localhost>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

On Fri, 2008-04-04 at 13:52 +0200, Jorge S. wrote:

<cut need for only one large flash device>

> Is it possible to boot from nand (or nor) flash on the AVR32 and the
> AT91SAMxxxx series? if yes, can you please
> provide part numbers for known working chips?.
> 

AVR32 AP700X supports boot from NOR flash only, and is limited by a 64
MB size of chip select 0 on the external bus interface.

AFAIK Atmel NOR flashes, some ST NOR flashes and Spansion NOR flashes
are supported. If you drop avr32 at atmel.com an email you will probably
get a known to work list.

I have seen board with AP7000 and 2 x 64 MB NOR flash working (-:

-- 
With kind regards,
Hans-Christian Egtvedt, Applications Engineer