[Buildroot] building tiny-x or x11R7 with latest snapshot

[Hebbar <gururajakr@sanyo.co.in>]

Hi Ivan

  Can you please share your Buildroot .config and other modifications you
have made to buildroot so that we can pply the same at our end. I am not
able to build atk,pango,cairo gtk. I can get only
glib2,directfb,fontconfig,freetype in graphic support section. 

 Thanks in advance

Regards
Gururaja


Ivan Kuten wrote:
> 
> Hello all,
> 
> I managed to build cairo, pango and gtk2 but with dependency on DirectFB -
> I need
> to modify flags to configure and dependencies. TinyX is buildable but
> seems only
> gtk-1.2 run on top of it. Xorg-7.2 and X11-R6 are not buildable and
> require a lot of hands work.
> 
> BR,
> Ivan
> 
>>
>> Hi Ulf,
>>
>>   If we cant build either Tinyx or Xorg or X11 then how else can we build
>> cairo,pango,gtk and other stuff. i am trying to build a decent toolchain
>> with all library for arm926ejs but i see that most of these are not
>> supported for am926ejs
>>
>>   Is there any possibilities that i can build just cairo pango gtk2
>> without
>> the need for x softwares. Once i build all this later can we integrate
>> these
>> with x softwares.
>>
>> Regards
>> Gururaja
>>
>>
>>
>> Ulf Samuelsson-2 wrote:
>>>
>>>>I receive errors if I want to build either tiny-x or the full X11R7. 
has
>>>> anyone else had these?  Is this something in the environment?
>>>>
>>>>
>>>>
>>>> I have a snapshot from a couple of months ago and I can build tiny-x
>>>> without
>>>> a problem on it.
>>>>
>>>>
>>>>
>>>> X11R7:
>>> [snip]
>>>
>>>>
>>>>
>>>> tiny-x:
>>>>
>>>> making imake with BOOTSTRAPCFLAGS= in config/imake
>>>>
>>>> /home/christopher/sb/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclib
>>>> c-gcc -Os -pipe
>>>> -I/home/christopher/sb/buildroot/build_arm/staging_dir/usr/include
>>>> -I/home/christopher/sb/buildroot/build_arm/staging_dir/include
>>>> -mtune=arm920t -o ccimake  -O -I../../include
>>>> -I../../imports/x11/include/X11 ccimake.c
>>>>
>>>
>>> As you can see from above, you are compiling ccimage.c using the ARM
>>> cross
>>> compiler.
>>>
>>>> /home/christopher/sb/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclib
>>>> c-gcc -Os -pipe
>>>> -I/home/christopher/sb/buildroot/build_arm/staging_dir/usr/include
>>>> -I/home/christopher/sb/buildroot/build_arm/staging_dir/include
>>>> -mtune=arm920t -c  -O -I../../include -I../../imports/x11/include/X11
>>>> `./ccimake` imake.c
>>>>
>>>> /bin/sh: ./ccimake: cannot execute binary file
>>>
>>> And now you try to run the ARM binary on your PC.
>>>
>>>>
>>> [snip]
>>>> ./config/imake/imake -I./config/cf  -s
>>>> ./config/makedepend/Makefile.proto
>>>> -f
>>>> ./config/makedepend/Imakefile -DTOPDIR=../..
>>>> -DCURDIR=./config/makedepend
>>>>
>>>> ./config/imake/imake: ./config/imake/imake: cannot execute binary file
>>>>
>>>
>>> I have seen the same problem, tinyx simply does not build.
>>> Xorg does not build either, and x11r7 is still work in progress.
>>>
>>>
>>>
>>> Best Regards
>>> Ulf Samuelsson
>>>
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at uclibc.org
>>> http://busybox.net/mailman/listinfo/buildroot
>>>
>>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/building-tiny-x-or-x11R7-with-latest-snapshot-tf4301002.html#a12306984
>> Sent from the BuildRoot mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at uclibc.org
>> http://busybox.net/mailman/listinfo/buildroot
>>
> 
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
> 
> 

-- 
View this message in context: http://www.nabble.com/building-tiny-x-or-x11R7-with-latest-snapshot-tf4301002.html#a12326683
Sent from the BuildRoot mailing list archive at Nabble.com.