From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Date: Fri, 30 Jan 2009 21:05:10 +0100
Subject: [Buildroot] svn commit:
	trunk/buildroot:	target/device/Atmel/arch-avr32/kernel-pa etc...
In-Reply-To: <877i4cmw4p.fsf@macbook.be.48ers.dk>
References: <20090130085310.9730F765E9@busybox.osuosl.org>
	<87zlh9np10.fsf@macbook.be.48ers.dk>
	<20090130100919.5b8c93ba@hcegtvedt>
	<1233337768.4147.93.camel@elrond.atmel.com>
	<877i4cmw4p.fsf@macbook.be.48ers.dk>
Message-ID: <1233345910.4147.99.camel@elrond.atmel.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

fre 2009-01-30 klockan 20:28 +0100 skrev Peter Korsgaard:
> >>>>> "Ulf" == Ulf Samuelsson <ulf.samuelsson@atmel.com> writes:
> 
> Hi,
> 
>  Ulf> HC has all these patches in the kernel-headers directory in his
>  Ulf> tree.  I thought initially that was a little risky.
> 
>  Ulf> I therefore tried putting them in the avr32 specific parts, 
>  Ulf> but I have seen strange effects on some packages.
>  Ulf> That is why I tried this approach.
> 
> Just split up the patches and put the kernel header _FIXES_ in
> toolchain/kernel-headers, just like all other architectures do.
> 
> The leftovers you can but under target/device/Atmel.
> 
>  Ulf> Have read a little bit more on the kernel-headers, 
>  Ulf> and it appears that I can keep the stuff in the
>  Ulf> AVR32 parts and then define 
> 
>  Ulf> KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/2.6.[27.6|28.2]
> 
>  Ulf> for AVR32 targets.
> 
>  Ulf> Does that make sense?
> 
> I would prefer to have the kernel headers stuff together for all
> archs, the amount (and size of) patches is normally very limited.
> 

Since HC has direct contact with the tool guys,
I will let him decide and implement.
One of the patches which was needed, is the largest one.

BR
Ulf Samuelsson