[Buildroot] BR-2009.02-rc3 Make Error (./makedepend: 1: Syntax error: Unterminated quoted string)

[Ulf Samuelsson <ulf.samuelsson@atmel.com>]

ons 2009-02-04 klockan 16:11 +0100 skrev Peter Korsgaard:
> >>>>> "QuickX" == QuickX  <quickx@hotmail.com> writes:
> 
> Hi,
> 
>  QuickX> I'm trying to build the at91sam9261ek_defconfig build on a
>  QuickX> Kubuntu 8.10 machine.  I issue the following commands and get
>  QuickX> the following error:
> 
>  QuickX> Note: I notice it seems to be at a perl type section.  I do have perl 
>  QuickX> v5.10.0 on the host machine, is there a package I'm missing?
> 
>  QuickX> $ tar xf buildroot-2009.02-rc3.tar.gz
>  QuickX> $ cd buildroot-2009.02-rc3
>  QuickX> $ make menuconfig ((SAVE EXIT))
>  QuickX> $ make at91sam9261ek_defconfig
>  QuickX> $ make
> 
> ..
> 
>  QuickX> Extracting x2p/Makefile (with variable substitutions)
>  QuickX> /home/dustin//buildroot-2009.02-rc3/toolchain_build_arm/bin/sed -i -e 
>  QuickX> 's/^.*<command-line>.*//g' 
>  QuickX> /home/dustin//buildroot-2009.02-rc3/build_arm/perl-5.8.8/x2p/makefile
>  QuickX> /home/dustin//buildroot-2009.02-rc3/toolchain_build_arm/bin/sed: can't read 
>  QuickX> /home/dustin//buildroot-2009.02-rc3/build_arm/perl-5.8.8/x2p/makefile: No 
> 
> I just tried building it for i686 without problems - I'll try the
> atmel config as well.
> 
> I don't use perl, but it seems from the above like Ulf's r25032 might
> have gotten the file case wrong - It talks about x2p/Makefile but is
> then trying to sed x2p/makefile. Could you try changing the $(SED)
> line in package/microperl/microperl.mk to use x2p/Makefile?
> 

IIRC, there is both a makefile and a Makefile, and it should be applied
to makefile.

BR
Ulf Samuelsson