From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Mack Date: Wed, 8 Jul 2009 22:46:58 +0200 Subject: [Buildroot] [PATCH] Add support for custom post-build script Message-ID: <1247086018-18816-1-git-send-email-daniel@caiaq.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net The config help text says it all: Specify a script to be run after the build has finished and before the BR2 starts packing the files into selected packages. This gives users the oportunity to do board-specific cleanups, add-ons and the like, so the generated files can be used directly without further processing. The script is called with the target directory name as first and only argument. Make sure the exit code of that script is 0, otherwise make will stop after calling it. Signed-off-by: Daniel Mack Cc: Sven Neumann --- Makefile | 4 ++++ target/Config.in | 15 +++++++++++++++ 2 files changed, 19 insertions(+), 0 deletions(-) diff --git a/Makefile b/Makefile index 76dd2cd..dbeede5 100644 --- a/Makefile +++ b/Makefile @@ -360,6 +360,10 @@ endif find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIPCMD) 2>/dev/null || true $(TARGET_LDCONFIG) -r $(TARGET_DIR) 2>/dev/null +ifneq ($(BR2_ROOTFS_POST_BUILD_SCRIPT),"") + $(BR2_ROOTFS_POST_BUILD_SCRIPT) $(TARGET_DIR) +endif + ifeq ($(BR2_ENABLE_LOCALE_PURGE),y) LOCALE_WHITELIST=$(PROJECT_BUILD_DIR)/locales.nopurge LOCALE_NOPURGE=$(strip $(subst ",,$(BR2_ENABLE_LOCALE_WHITELIST))) diff --git a/target/Config.in b/target/Config.in index 87abbe6..dbdc2d6 100644 --- a/target/Config.in +++ b/target/Config.in @@ -12,6 +12,21 @@ config BR2_ROOTFS_SUFFIX help Add a custom string to the end of the root file system name. +config BR2_ROOTFS_POST_BUILD_SCRIPT + string "Custom script to run before packing files" + default "" + help + Specify a script to be run after the build has finished and before + the BR2 starts packing the files into selected packages. + + This gives users the oportunity to do board-specific cleanups, + add-ons and the like, so the generated files can be used directly + without further processing. + + The script is called with the target directory name as first and + only argument. Make sure the exit code of that script is 0, + otherwise make will stop after calling it. + comment "filesystem for target device" source "target/cramfs/Config.in" -- 1.6.3.1