From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bob Bouterse <bob.bouterse@dm-holdings-na.com>
Date: Wed, 26 May 2010 14:45:52 -0400
Subject: [Buildroot] How does the Start and Entry Point addresses for a
	uImage get set?
Message-ID: <1274899552.26577.86.camel@bbouterse-debian.escient.local>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Thanks for the beagleboard patch! I have morphed it into an omap3_evm
configuration. But I have hit a mystery...
When the uImage for my kernel is created with mkimage, the start address
is being set to 0x00008000, it should be 0x80008000 . The zreladdr-y in
linux/arch/arm/mach-omap2/Makefile.boot is set to 0x80008000 . 

Does anyone know how this gets set in the uImage header?

FYI, I found that the parameters to mkimage were set to zero in
buildroot/target/u-boot/Makefile.in . I modified these to 0x80000000,
and that corrected the problem, but I can't believe this is hard coded.