From: cmchao <cmchao@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 12/19] quagga : convert to autotools infrastructure & bump to 0.99.12
Date: Wed, 16 Jun 2010 19:47:14 +0800 [thread overview]
Message-ID: <1276688841-5252-13-git-send-email-cmchao@gmail.com> (raw)
In-Reply-To: <1276688841-5252-1-git-send-email-cmchao@gmail.com>
Signed-off-by: cmchao <cmchao@gmail.com>
---
package/quagga/quagga.mk | 125 +++++++++++++---------------------------------
1 files changed, 35 insertions(+), 90 deletions(-)
diff --git a/package/quagga/quagga.mk b/package/quagga/quagga.mk
index 30ebd35..4469395 100644
--- a/package/quagga/quagga.mk
+++ b/package/quagga/quagga.mk
@@ -3,176 +3,121 @@
# quagga suite
#
#############################################################
-QUAGGA_VERSION:=0.99.9
+QUAGGA_VERSION:=0.99.12
QUAGGA_SOURCE:=quagga-$(QUAGGA_VERSION).tar.gz
QUAGGA_SITE:=http://www.quagga.net/download/attic
-QUAGGA_DIR:=$(BUILD_DIR)/quagga-$(QUAGGA_VERSION)
-QUAGGA_CAT:=$(ZCAT)
-QUAGGA_CONFIGURE:=
-QUAGGA_DEPENDENCIES:=
+QUAGGA_INSTALL_STAGING = NO
+QUAGGA_INSTALL_TARGET = YES
+QUAGGA_LIBTOOL_PATCH = NO
+QUAGGA_CONF_OPT = --program-transform-name=''
ifeq ($(BR2_PACKAGE_QUAGGA_ZEBRA),y)
-QUAGGA_CONFIGURE+=--enable-zebra
+QUAGGA_CONF_OPT+=--enable-zebra
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=zebra
QUAGGA_BINARY=$(QUAGGA_DIR)/zebra/.libs/zebra
endif
else
-QUAGGA_CONFIGURE+=--disable-zebra
+QUAGGA_CONF_OPT+=--disable-zebra
endif
ifeq ($(BR2_PACKAGE_QUAGGA_BGPD),y)
-QUAGGA_CONFIGURE+=--enable-bgpd
+QUAGGA_CONF_OPT+=--enable-bgpd
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=bgpd
QUAGGA_BINARY=$(QUAGGA_DIR)/bgpd/.libs/bgpd
endif
else
-QUAGGA_CONFIGURE+=--disable-bgpd
+QUAGGA_CONF_OPT+=--disable-bgpd
endif
ifeq ($(BR2_PACKAGE_QUAGGA_RIPD),y)
-QUAGGA_CONFIGURE+=--enable-ripd
+QUAGGA_CONF_OPT+=--enable-ripd
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=ripd
QUAGGA_BINARY=$(QUAGGA_DIR)/ripd/.libs/ripd
endif
else
-QUAGGA_CONFIGURE+=--disable-ripd
+QUAGGA_CONF_OPT+=--disable-ripd
endif
ifeq ($(BR2_PACKAGE_QUAGGA_RIPNGD),y)
-QUAGGA_CONFIGURE+=--enable-ripngd
+QUAGGA_CONF_OPT+=--enable-ripngd
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=ripngd
QUAGGA_BINARY=$(QUAGGA_DIR)/ripngd/.libs/ripngd
endif
else
-QUAGGA_CONFIGURE+=--disable-ripngd
+QUAGGA_CONF_OPT+=--disable-ripngd
endif
ifeq ($(BR2_PACKAGE_QUAGGA_OSPFD),y)
-QUAGGA_CONFIGURE+=--enable-ospfd
+QUAGGA_CONF_OPT+=--enable-ospfd
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=ospfd
QUAGGA_BINARY=$(QUAGGA_DIR)/ospfd/.libs/ospfd
endif
else
-QUAGGA_CONFIGURE+=--disable-ospfd
+QUAGGA_CONF_OPT+=--disable-ospfd
endif
ifeq ($(BR2_PACKAGE_QUAGGA_OSPF6D),y)
-QUAGGA_CONFIGURE+=--enable-ospf6d
+QUAGGA_CONF_OPT+=--enable-ospf6d
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=ospf6d
QUAGGA_BINARY=$(QUAGGA_DIR)/ospf6d/.libs/ospf6d
endif
else
-QUAGGA_CONFIGURE+=--disable-ospf6d
+QUAGGA_CONF_OPT+=--disable-ospf6d
endif
ifeq ($(BR2_PACKAGE_QUAGGA_WATCHQUAGGA),y)
-QUAGGA_CONFIGURE+=--enable-watchquagga
+QUAGGA_CONF_OPT+=--enable-watchquagga
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=watchquagga
QUAGGA_BINARY=$(QUAGGA_DIR)/watchquagga/.libs/watchquagga
endif
else
-QUAGGA_CONFIGURE+=--disable-watchquagga
+QUAGGA_CONF_OPT+=--disable-watchquagga
endif
ifeq ($(BR2_PACKAGE_QUAGGA_ISISD),y)
-QUAGGA_CONFIGURE+=--enable-isisd
+QUAGGA_CONF_OPT+=--enable-isisd
ifndef QUAGGA_TARGET_BINARY
QUAGGA_TARGET_BINARY=isisd
QUAGGA_BINARY=$(QUAGGA_DIR)/isisd/.libs/isisd
endif
else
-QUAGGA_CONFIGURE+=--disable-isisd
+QUAGGA_CONF_OPT+=--disable-isisd
endif
ifeq ($(BR2_PACKAGE_QUAGGA_BGP_ANNOUNCE),y)
-QUAGGA_CONFIGURE+=--enable-bgp-announce
+QUAGGA_CONF_OPT+=--enable-bgp-announce
else
-QUAGGA_CONFIGURE+=--disable-bgp-announce
+QUAGGA_CONF_OPT+=--disable-bgp-announce
endif
ifeq ($(BR2_PACKAGE_QUAGGA_NETLINK),y)
-QUAGGA_CONFIGURE+=--enable-netlink
+QUAGGA_CONF_OPT+=--enable-netlink
else
-QUAGGA_CONFIGURE+=--disable-netlink
+QUAGGA_CONF_OPT+=--disable-netlink
endif
ifeq ($(BR2_PACKAGE_QUAGGA_SNMP),y)
-QUAGGA_CONFIGURE+=--enable-snmp
+QUAGGA_CONF_OPT+=--enable-snmp
QUAGGA_DEPENDENCIES+=netsnmp
else
-QUAGGA_CONFIGURE+=--disable-snmp
+QUAGGA_CONF_OPT+=--disable-snmp
endif
ifeq ($(BR2_PACKAGE_QUAGGA_TCP_ZEBRA),y)
-QUAGGA_CONFIGURE+=--enable-tcp-zebra
+QUAGGA_CONF_OPT+=--enable-tcp-zebra
else
-QUAGGA_CONFIGURE+=--disable-tcp-zebra
+QUAGGA_CONF_OPT+=--disable-tcp-zebra
endif
ifeq ($(BR2_PACKAGE_QUAGGA_OPAGUE_LSA),y)
-QUAGGA_CONFIGURE+=--enable-opaque-lsa
+QUAGGA_CONF_OPT+=--enable-opaque-lsa
else
-QUAGGA_CONFIGURE+=--disable-opaque-lsa
+QUAGGA_CONF_OPT+=--disable-opaque-lsa
endif
-$(DL_DIR)/$(QUAGGA_SOURCE):
- $(call DOWNLOAD,$(QUAGGA_SITE),$(QUAGGA_SOURCE))
-
-ifneq ($(QUAGGA_PATCH),)
-QUAGGA_PATCH_FILE=$(DL_DIR)/$(QUAGGA_PATCH)
-$(DL_DIR)/$(QUAGGA_PATCH):
- $(call DOWNLOAD,$(QUAGGA_SITE),$(QUAGGA_PATCH))
-endif
-quagga-source: $(DL_DIR)/$(QUAGGA_SOURCE) $(QUAGGA_PATCH_FILE)
-
-$(QUAGGA_DIR)/.unpacked: $(DL_DIR)/$(QUAGGA_SOURCE) $(DL_DIR)/$(QUAGGA_PATCH)
- $(QUAGGA_CAT) $(DL_DIR)/$(QUAGGA_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(QUAGGA_DIR) package/quagga/ quagga\*.patch
-ifneq ($(QUAGGA_PATCH),)
- (cd $(QUAGGA_DIR) && $(QUAGGA_CAT) $(DL_DIR)/$(QUAGGA_PATCH) | patch -p1)
- if [ -d $(QUAGGA_DIR)/debian/patches ]; then \
- toolchain/patch-kernel.sh $(QUAGGA_DIR) $(QUAGGA_DIR)/debian/patches \*.patch; \
- fi
-endif
- touch $@
-
-$(QUAGGA_DIR)/.configured: $(QUAGGA_DIR)/.unpacked
- (cd $(QUAGGA_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(TARGET_CONFIGURE_ARGS) \
- ./configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- $(DISABLE_LARGEFILE) \
- $(DISABLE_IPV6) \
- $(QUAGGA_CONFIGURE) \
- --program-transform-name='' \
- )
- touch $@
-
-$(QUAGGA_BINARY): $(QUAGGA_DIR)/.configured
- $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(QUAGGA_DIR)
-
-$(TARGET_DIR)/usr/sbin/$(QUAGGA_TARGET_BINARY): $(QUAGGA_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(QUAGGA_DIR) install
+define BOA_INSTALL_TARGET_CMDS
+ $(MAKE) DESTDIR=$(TARGET_DIR) -C $(@D) install
ifneq ($(BR2_PACKAGE_QUAGGA_HEADERS),y)
rm -rf $(TARGET_DIR)/usr/include/quagga
endif
+endef
-quagga: $(QUAGGA_DEPENDENCIES) $(TARGET_DIR)/usr/sbin/$(QUAGGA_TARGET_BINARY)
-
-quagga-clean:
- -$(MAKE) DESTDIR=$(TARGET_DIR) -C $(QUAGGA_DIR) uninstall
- -$(MAKE) -C $(QUAGGA_DIR) clean
-
-quagga-dirclean:
- rm -rf $(QUAGGA_DIR)
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_QUAGGA),y)
-TARGETS+=quagga
-endif
+$(eval $(call AUTOTARGETS,package,quagga))
--
1.7.0.4
next prev parent reply other threads:[~2010-06-16 11:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-16 11:47 [Buildroot] [PATCH 00/19] Convert packages to new autotools cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 01/19] distcc : convert to autotools infrastructure & bump to 1.1-20100428 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 02/19] dmalloc : convert to autotools infrastructure cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 03/19] fbv " cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 04/19] links : convert to autotools infrastructure & bump to 1.01pre1-no-ssl cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 05/19] dialog : convert to autotools infrastructure & bump to 1.1-20100428 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 06/19] berkeleydb : convert to autotools infrastructure & bump to 4.4.20 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 07/19] dash : convert to autotools infrastructure & bump to 0.5.5.1 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 08/19] diffutils : convert to autotools infrastructure cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 09/19] libfuse : convert to autotools infrastructure & bump to 2.8.4 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 10/19] gzip : convert to autotools infrastructure & bump to 1.4 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 11/19] make : convert to autotools infrastructure cmchao
2010-06-16 12:58 ` Paulius Zaleckas
2010-06-16 11:47 ` cmchao [this message]
2010-06-16 11:47 ` [Buildroot] [PATCH 13/19] sdl_mixer : convert to autotools infrastructure & bump to 1.2.11 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 14/19] sdl_ttf : convert to autotools infrastructure cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 15/19] sdl : convert to autotools infrastructure & bump to 1.2.14 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 16/19] gmp : convert to autotools infrastructure & bump to 5.0.1 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 17/19] libgpg-error : convert to autotools infrastructure & bump to 1.8 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 18/19] liblockfile : convert to autotools infrastructure & bump to 1.08-4 cmchao
2010-06-16 11:47 ` [Buildroot] [PATCH 19/19] lrzsz : convert to autotools infrastructure cmchao
2010-06-16 17:13 ` Thomas Petazzoni
2010-06-16 20:43 ` Peter Korsgaard
2010-06-20 15:02 ` [Buildroot] [PATCH 00/19] Convert packages to new autotools Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276688841-5252-13-git-send-email-cmchao@gmail.com \
--to=cmchao@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox