From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Date: Sat, 5 May 2012 22:05:18 -0400 Subject: [Buildroot] [PATCH] Add the package read-edid which provides a pair of utilities to read and parse the video monitor information block (EDID). Message-ID: <1336269918-24339-1-git-send-email-golubovsky@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Signed-off-by: Dmitry --- package/Config.in | 1 + package/read-edid/Config.in | 16 ++++++++++++++++ package/read-edid/read-edid.mk | 20 ++++++++++++++++++++ 3 files changed, 37 insertions(+), 0 deletions(-) create mode 100644 package/read-edid/Config.in create mode 100644 package/read-edid/read-edid.mk diff --git a/package/Config.in b/package/Config.in index 6caca9d..94d0fb4 100644 --- a/package/Config.in +++ b/package/Config.in @@ -211,6 +211,7 @@ source "package/openocd/Config.in" source "package/parted/Config.in" source "package/pciutils/Config.in" source "package/picocom/Config.in" +source "package/read-edid/Config.in" source "package/rng-tools/Config.in" source "package/sane-backends/Config.in" source "package/sdparm/Config.in" diff --git a/package/read-edid/Config.in b/package/read-edid/Config.in new file mode 100644 index 0000000..465a062 --- /dev/null +++ b/package/read-edid/Config.in @@ -0,0 +1,16 @@ +config BR2_PACKAGE_READ_EDID + bool "read-edid" + depends on (BR2_i386) + help + Read-edid is a pair of tools (originally by John Fremlin) for reading + the EDID from a monitor. It should work with most monitors made since + 1996 (except for newer ones with 256-byte EDID's - WiP), assuming the + video card supports the standard read commands (most do). Read-edid + is a set of two tools - get-edid, which gets the raw edid information + from the monitor, and parse-edid, which turns the raw binary information + into an XF86Config-compatible monitor section. + + http://polypux.org/projects/read-edid/ + + + diff --git a/package/read-edid/read-edid.mk b/package/read-edid/read-edid.mk new file mode 100644 index 0000000..6328def --- /dev/null +++ b/package/read-edid/read-edid.mk @@ -0,0 +1,20 @@ +############################################ +# +# read-edid +# +############################################ + +READ_EDID_VERSION = 1.4.2 +READ_EDID_SITE = http://www.polypux.org/projects/read-edid/ + +define READ_EDID_BUILD_CMDS + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) +endef + +define READ_EDID_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid + $(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid +endef + +$(eval $(call AUTOTARGETS)) + -- 1.7.2.5