From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael J. Hammel Date: Thu, 17 May 2012 22:38:21 -0600 Subject: [Buildroot] connman requirement for resolver in toolchain In-Reply-To: <20120517102649.6a6dc5ab@skate> References: <1337223711.1915.3.camel@galileo.gfxmuse.org> <20120517102649.6a6dc5ab@skate> Message-ID: <1337315901.1681.13.camel@kepler.gfxmuse.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Thu, 2012-05-17 at 10:26 +0200, Thomas Petazzoni wrote: > Hello Michael, Howdy Thomas. > All packages in Buildroot assume that if uClibc is used, then the > uClibc configuration contains at least the options that Buildroot uses > to build uClibc when the internal backend is used. Those options are > listed in toolchain/uClibc/uClibc-0.9.xx.config. Oops. That's what I missed. I didn't check my uClibc config. I only looked at Crosstool-NG's config (well, and Buildroot's). I'll check uClibc. > But the overall answer is: if you're using an uClibc external > toolchain, Buildroot can't do anything to adjust the uClibc > configuration, so it's your job to do so :-) Yup. I just have to remember which ones to check. :-) Thanks again Thomas. -- Michael J. Hammel