From: John Stile <john@stilen.com>
To: buildroot@busybox.net
Subject: [Buildroot] adding dhcpcd
Date: Thu, 07 Mar 2013 07:30:16 -0800 [thread overview]
Message-ID: <1362670216.30287.9.camel@genx> (raw)
In-Reply-To: <20130307160350.1fdeb066@skate>
On Thu, 2013-03-07 at 16:03 +0100, Thomas Petazzoni wrote:
> Dear John Stile,
>
> On Thu, 07 Mar 2013 06:53:10 -0800, John Stile wrote:
>
> > Additionally, are the toolchain/uClibc/uClibc-0.9.32.config variables
> > available inside my dhcpcd.mk, so I can add the dependency on
> > UCLIBC_SUPPORT_AI_ADDRCONFIG?
>
> No. The latest Buildroot has UCLIBC_SUPPORT_AI_ADDRCONFIG enabled by
> default in the uClibc configuration.
>
> Thomas
This finally builds.
I had to add the --os=linux to the configure step
I tried using BR2_GCC_TARGET_ABI, which is "aapcs-linux" for my system,
but that didn't work, and the system assume bsd again.
How does this look?
-----------------
dhcpcd patch
-----------------
Adding pacakge dhcpcd to buildroot, ordered alphbetically in Networking pacakges, warning about uClibc config.
signed-off-by: John Stile <john@stilen.com>
--- a/buildroot-2011.11/package/Config.in 2013-03-07 07:17:35.000000000 -0800
+++ b/buildroot-2011.11/package/Config.in 2013-03-07 07:17:05.000000000 -0800
@@ -408,6 +408,7 @@ source "package/cups/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
source "package/dhcp/Config.in"
endif
+source "package/dhcpcd/Config.in"
source "package/dhcpdump/Config.in"
source "package/dnsmasq/Config.in"
source "package/dropbear/Config.in"
--- a/buildroot-2011.11/package/dhcpcd/Config.in 2013-03-07 07:23:25.000000000 -0800
+++ b/buildroot-2011.11/package/dhcpcd/Config.in 2013-03-07 07:21:47.000000000 -0800
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_DHCPCD
+ bool "dhcpcd"
+ help
+ an RFC2131 compliant DHCP client
+ NOTE: If uClibc, depends on UCLIBC_SUPPORT_AI_ADDRCONFIG=y
--- a/buildroot-2011.11/package/dhcpcd/dhcpcd.mk 2013-03-07 07:13:09.000000000 -0800
+++ b/buildroot-2011.11/package/dhcpcd/dhcpcd.mk 2013-03-07 07:00:54.000000000 -0800
@@ -0,0 +1,46 @@
+#############################################################
+#
+# dhcpcd
+#
+#############################################################
+
+DHCPCD_VERSION = 5.6.7
+DHCPCD_SOURCE = dhcpcd-$(DHCPCD_VERSION).tar.bz2
+DHCPCD_SITE = http://roy.marples.name/downloads/dhcpcd/
+DHCPCD_LICENSE = BSD-2c
+DHCPCD_INSTALL_STAGING = NO
+
+CONFIG_ARGS += --target=$(BR2_GCC_TARGET_ARCH)
+CONFIG_ARGS += --os=linux
+
+ifeq ($(BR2_USE_MMU),n)
+ CONFIG_ARGS += --disable-fork
+endif
+
+ifeq ($(BR2_INET_IPV6),)
+ DHCPCD_CFLAGS += -UHASIPv6
+endif
+
+define DHCPCD_CONFIGURE_CMDS
+ (cd $(@D); \
+ ./configure $(CONFIG_ARGS) )
+endef
+
+define DHCPCD_BUILD_CMDS
+ $(MAKE) $(TARGET_CONFIGURE_OPTS) CC="$(TARGET_CC)" LD="$(TARGET_LD)" PATH=$(TARGET_PATH) $(DHCPCD_CFLAGS) -C $(@D) all
+endef
+
+define DHCPCD_INSTALL_TARGET_CMDS
+ $(INSTALL) -D -m 0755 $(@D)/dhcpcd $(TARGET_DIR)/usr/bin/dhcpcd
+ $(INSTALL) -D -m 0644 $(@D)/dhcpcd.conf $(TARGET_DIR)/etc/dhcpcd.conf
+endef
+
+define DHCPCD_DEVICES
+ #/dev/foo c 666 0 0 42 0 - - -
+endef
+
+define DHCPCD_PERMISSIONS
+ /usr/bin/dhcpcd f 4755 0 0 - - - - -
+endef
+
+$(eval $(call GENTARGETS))
next prev parent reply other threads:[~2013-03-07 15:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 18:37 [Buildroot] adding dhcpcd John Stile
2013-03-01 18:47 ` Gustavo Zacarias
2013-03-05 16:21 ` John Stile
2013-03-05 18:47 ` Thomas Petazzoni
2013-03-06 18:01 ` John Stile
2013-03-06 18:58 ` Thomas Petazzoni
2013-03-06 19:50 ` John Stile
2013-03-06 20:05 ` Reuben Dowle
2013-03-06 20:08 ` Thomas Petazzoni
2013-03-06 20:41 ` John Stile
2013-03-06 20:54 ` Thomas Petazzoni
2013-03-06 21:02 ` John Stile
2013-03-06 21:14 ` Thomas Petazzoni
2013-03-06 21:20 ` John Stile
2013-03-06 21:29 ` Thomas Petazzoni
2013-03-06 22:57 ` John Stile
2013-03-06 23:48 ` Gilles Talis
2013-03-07 1:44 ` John Stile
2013-03-07 4:51 ` Gilles Talis
2013-03-07 7:31 ` John Stile
2013-03-07 8:53 ` Gilles Talis
2013-03-07 14:53 ` John Stile
2013-03-07 15:03 ` Thomas Petazzoni
2013-03-07 15:30 ` John Stile [this message]
2013-03-07 17:15 ` Thomas Petazzoni
2013-03-06 20:06 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362670216.30287.9.camel@genx \
--to=john@stilen.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox