From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brian Beattie Date: Tue, 03 Dec 2013 20:02:45 -0800 Subject: [Buildroot] pcduino Message-ID: <1386129765.18658.57.camel@kokopelli> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net I'm working on adding support for the pcDuino V1 board, this is an Allwinner A10 based board so I'm using the cubieboard as a staring point. The issue I have is that or U-Boot and the kernel this is not a problem, however for sunxi-boards and sunxi-tools, the commit id is in the Makefile. I'd like to know what the experts think the best approach is. I currently have the Makefiles patched. I could update the Makefiles, but I don't have a cubieboard to test with. I could modify the *.mk and Config files to make the commit id a configurable item and if not set use the current commit ID. I started to do this, but sunxi-tools has a Config.in and a Config.in.host and I'm not sure how to handle setting one variable that would be used in both files. Suggestions, pointers welcome. Some other approach I have not thought of. BTW I did the original KB9202 support many years ago though I have been away for a while. (that board just bit the dust which is why I bought the pcDuino). -- "For every complex problem there is an answer that is clear, simple, and wrong." -- H. L. Mencken Brian Beattie -- www.brian-beattie.com LFS12947