From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Mon, 20 Oct 2014 12:12:52 +0200 Subject: [Buildroot] [PATCH v2 2/2] imx6sabresd/create-boot-sd.sh: allow usage for i.MX53 In-Reply-To: <1413799972-4281-1-git-send-email-eric@eukrea.com> References: <1413799972-4281-1-git-send-email-eric@eukrea.com> Message-ID: <1413799972-4281-2-git-send-email-eric@eukrea.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net this script permits the generation of an sdcard that will boot on and i.MX53 QSB with a recent bootloader (now supported by buildroot). Tested on an i.MX53 QSB and an i.MX53 QSB-R Signed-off-by: Eric B?nard --- board/freescale/imx53loco/create-boot-sd.sh | 1 + board/freescale/imx6sabresd/create-boot-sd.sh | 8 +++----- 2 files changed, 4 insertions(+), 5 deletions(-) create mode 120000 board/freescale/imx53loco/create-boot-sd.sh diff --git a/board/freescale/imx53loco/create-boot-sd.sh b/board/freescale/imx53loco/create-boot-sd.sh new file mode 120000 index 0000000..3083fd2 --- /dev/null +++ b/board/freescale/imx53loco/create-boot-sd.sh @@ -0,0 +1 @@ +../imx6sabresd/create-boot-sd.sh \ No newline at end of file diff --git a/board/freescale/imx6sabresd/create-boot-sd.sh b/board/freescale/imx6sabresd/create-boot-sd.sh index 9930b1e..af45115 100755 --- a/board/freescale/imx6sabresd/create-boot-sd.sh +++ b/board/freescale/imx6sabresd/create-boot-sd.sh @@ -7,9 +7,7 @@ PROGNAME=$(basename $0) usage() { - echo "Create an SD card that boots on an i.MX6DL SABRESD board." - echo "It is supposed to work also for the i.MX6Q SABRESD board, but" - echo "it this is not tested." + echo "Create an SD card that boots on an i.MX53/6 board." echo echo "Note: all data on the the card will be completely deleted!" echo "Use with care!" @@ -77,8 +75,8 @@ TMPDIR=$(mktemp -d) # FAT partition: kernel and DTBs mkfs.vfat ${PART1} mount ${PART1} ${TMPDIR} -cp output/images/uImage ${TMPDIR}/ -cp output/images/*.dtb ${TMPDIR}/ +cp output/images/*Image ${TMPDIR}/ +cp output/images/*.dtb ${TMPDIR}/ || true sync umount ${TMPDIR} -- 2.1.1