From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eelco Chaudron Date: Thu, 24 Dec 2015 10:15:40 +0100 Subject: [Buildroot] buildroot support for OrangePI PC In-Reply-To: <56748758.7040908@mind.be> References: <56748758.7040908@mind.be> Message-ID: <1450948540529.50320.154990@webmail2> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net I decided to do some work on the OrangePI PC and I have a basic Linux 4.4 setup running. It boots, and I have serial access to the board. Cam if you could share your 3.4 repo (and or 4.4 if it has better OrangePI support) I can get started with this too. Cheers, Eelco This is the diff; diff --git a/board/orangepi/orangepipc/boot.cmd b/board/orangepi/orangepipc/boot.cmd new file mode 100644 index 0000000..7d61e7b --- /dev/null +++ b/board/orangepi/orangepipc/boot.cmd @@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r uImage +fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-pc.dtb + +bootm $kernel_addr_r - $fdt_addr_r diff --git a/board/orangepi/orangepipc/genimage.cfg b/board/orangepi/orangepipc/genimage.cfg new file mode 100644 index 0000000..43c2249 --- /dev/null +++ b/board/orangepi/orangepipc/genimage.cfg @@ -0,0 +1,36 @@ +# Minimal SD card image for the OrangePi PC +# + +image boot.vfat { + vfat { + files = { + "uImage", + "sun8i-h3-orangepi-pc.dtb", + "boot.scr" + } + } + size = 10M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/orangepi/orangepipc/post-build.sh b/board/orangepi/orangepipc/post-build.sh new file mode 100755 index 0000000..9f115cb --- /dev/null +++ b/board/orangepi/orangepipc/post-build.sh @@ -0,0 +1,14 @@ +#!/bin/sh +# post-build.sh for OrangePi PC taken from CubieBoard's post-build.sh +# 2013, Carlo Caione <> + +BOARD_DIR="$(dirname $0)" +MKIMAGE=$HOST_DIR/usr/bin/mkimage +BOOT_CMD=$BOARD_DIR/boot.cmd +BOOT_CMD_H=$BINARIES_DIR/boot.scr + +# U-Boot script +if [ -e $MKIMAGE -a -e $BOOT_CMD ]; +then + $MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H +fi diff --git a/board/orangepi/orangepipc/post-image.sh b/board/orangepi/orangepipc/post-image.sh new file mode 100755 index 0000000..05f6b70 --- /dev/null +++ b/board/orangepi/orangepipc/post-image.sh @@ -0,0 +1,16 @@ +#!/bin/bash + +GENIMAGE_CFG="board/orangepi/orangepipc/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" + +RET=${?} +exit ${RET} diff --git a/configs/orangepipc_defconfig b/configs/orangepipc_defconfig new file mode 100644 index 0000000..cd349c5 --- /dev/null +++ b/configs/orangepipc_defconfig @@ -0,0 +1,26 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_NEON_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="OrangePi_PC" +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi PC" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepipc/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/orangepi/orangepipc/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a516ac6dda21e6f5edceecd08b475b16e360656b" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x40008000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-pc" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="orangepi_pc" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="4832e17787acb29734d895751bc7a594908aecc6" +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_PACKAGE_HOST_GENIMAGE=y On 18 December 2015 23:23:20 +01:00, Arnout Vandecappelle wrote: > On 18-12-15 14:22, Eelco Chaudron wrote: > > > Hi All, > > > > Was wondering if anyone has started working on OrangePi PC board support? > > > Not that I know of. But it should be quite similar to the cubieboard I think. > > If you make a defconfig for it, consider using genimage rather than a custom > script like mkcubiecard. > > Regards, > Arnout > > > -- > Arnout Vandecappelle arnout at mind be > Senior Embedded Software Architect +32-16-286500 > Essensium/Mind > G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven > LinkedIn profile: > GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF > -------------- next part -------------- An HTML attachment was scrubbed... URL: