From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kinsella, Ray <ray.kinsella@intel.com>
Date: Fri, 15 Apr 2016 17:38:55 +0000
Subject: [Buildroot] [PATCH] package/wview: New Package
In-Reply-To: <20160306163440.63daf3fe@free-electrons.com>
References: <1453220588.3109.36.camel@intel.com>
 <20160306163440.63daf3fe@free-electrons.com>
Message-ID: <1460741934.3046.22.camel@intel.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hi Thomas, 

Sorry I only saw your response to this email now.  Clearly I messed up
badly when building this before sending this patch, apologies.  
 
Much of the feedback below is already done, the rest I will sort out
before sending a v2. 

( BTW I was trying to reuse a system daemon script from WVIEW - clearly
a bad idea, I will write one from scratch ). 

Ray K

On Sun, 2016-03-06 at 16:34 +0100, Thomas Petazzoni wrote:
> Ray,
> 
> I'm sorry, but this patch is far, far from being ready. To be honest,
> I am not even sure you even tested it considering the numerous issues 
> I found. See below.
> 
> > diff --git a/package/Config.in b/package/Config.in
> > index b971494..be2b0ba 100644
> > --- a/package/Config.in
> > +++ b/package/Config.in
> > @@ -1279,6 +1279,7 @@ menu "Miscellaneous"
> >         source "package/snowball-init/Config.in"
> >         source "package/wine/Config.in"
> >         source "package/xutil_util-macros/Config.in"
> > +        source "package/wview/Config.in"
> 
> Wrong indentation, alphabetic ordering not sepected.

Will fix. 

> 
> >  endmenu
> > 
> >  menu "Networking applications"
> > diff --git a/package/wview/0001-fix-absolute-path.patch
> > b/package/wview/0001-fix-absolute-path.patch
> > new file mode 100644
> > index 0000000..d0ccced
> > --- /dev/null
> > +++ b/package/wview/0001-fix-absolute-path.patch
> 
> Patch lacks description + SoB.

Fixed + Fixed.

> 
> > @@ -0,0 +1,220 @@
> > +diff -Naur a/alarms/Makefile.am b/alarms/Makefile.am
> > +--- a/alarms/Makefile.am       2014-05-28 01:22:49.000000000 +0100
> > ++++ b/alarms/Makefile.am       2016-01-18 15:40:26.229746967 +0000
> > +@@ -39,6 +39,5 @@
> > + wvalarmd_LDFLAGS = -L$(prefix)/lib -L/usr/lib
> 
> The -L/usr/lib is quite certainly the thing to remove. So should
> -L$(prefix)/lib, as prefix=/usr, so it would become -L/usr/lib as
> well.
> Please fix this globally.

Fixed across the board. 

> 
> > diff --git a/package/wview/Config.in b/package/wview/Config.in
> > new file mode 100644
> > index 0000000..a0f0bc9
> > --- /dev/null
> > +++ b/package/wview/Config.in
> > @@ -0,0 +1,23 @@
> > +comment "wview needs a toolchain w/ C++, wchar and udev /dev
> > management"
> > +       depends on !(BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR &&
> > BR2_PACKAGE_HAS_UDEV)
> 
> We normally write such conditions as:
> 
> 	depends on !<foo> || !<bar> || !<baz>

Fixed

> > +
> > +config BR2_PACKAGE_WVIEW
> > +       bool "wview"
> > +       depends on BR2_INSTALL_LIBSTDCPP
> > +       depends on BR2_USE_WCHAR
> > +       depends on BR2_PACKAGE_HAS_UDEV
> > +       depends on BR2_PACKAGE_APACHE
> 
> Why ?

The daemon have a dependency on a webserver.
It uses apache + php to generate rolling graphs. 
AUTOTOOLs checks for them as I remember.  

> 
> > +       depends on BR2_PACKAGE_PHP
> 
> Why ?

as above ... 

> 
> > +       select BR2_PACKAGE_RADLIB
> 
> There is no such package in Buildroot.

radklib v5 is on the mailing list. 

> 
> > +       select BR2_PACKAGE_LIBCURL
> > +       select BR2_PACKAGE_GD
> > +       select BR2_PACKAGE_LIBPNG
> > +       select BR2_PACKAGE_LIBUSB
> > +       select BR2_PACKAGE_OPENSSL
> 
> The package also needs sqlite, as can be seen in its configure
> script:
> 
> AC_CHECK_LIB([sqlite3], [sqlite3_open], [], [echo "libsqlite3 is
> missing!";exit -1])

Let me look into that one, it may not be accurate. 

> 
> Thread support is also needed, as can be seen in the configure
> script:
> 
> AC_CHECK_LIB([pthread], [pthread_create], [], [echo "libpthread is
> missing!";exit -1])

Will look into this.

> 
> > +       help
> > +            wview is a collection of unix daemons which interface
> > with a
> > +            supported weather station to retrieve archive records
> > +            (if generated by the station) and current conditions.
> > +
> > +            http://sourceforge.net/projects/radlib/
> 
> Is this the right URL ?

Have fixed

> > diff --git a/package/wview/S61wview b/package/wview/S61wview
> > new file mode 100644
> > index 0000000..c64a014
> > --- /dev/null
> > +++ b/package/wview/S61wview
> > @@ -0,0 +1,205 @@
> > +#!/bin/sh
> > +
> > +# add to the shared library search path
> > +export LD_LIBRARY_PATH=/lib:/usr/lib
> 
> Not needed.

ok 

> 
> > +CONF_DIRECTORY=/etc/wview
> > +RUN_DIRECTORY=/var/wview
> > +WVIEW_INSTALL_DIR=/usr/bin
> > +# chkconfig: - 89 11
> 
> Not needed.

ok

> 
> > +# description: wview is a unix weather program
> > +#
> > +# wview          Start/Stop the wview daemons
> > +#
> > +# processnames: wviewd htmlgend wviewftpd wvalarmd wvcwopd
> > wviewsshd wvhttpd
> > +# config: $prefix/etc/wview
> > +# pidfiles: $prefix/var/wview/*.pid
> > +
> > +# Source function library:
> > +#. /etc/init.d/functions
> 
> Not needed.

ok

> > +
> > +WVIEWD_FILE=`cat $CONF_DIRECTORY/wview-binary`
> > +WVIEWD_BIN=$WVIEW_INSTALL_DIR/$WVIEWD_FILE
> > +test -x $WVIEWD_BIN || exit 5
> > +
> > +HTMLD_BIN=$WVIEW_INSTALL_DIR/htmlgend
> > +test -x $HTMLD_BIN || exit 6
> > +
> > +FTPD_BIN=$WVIEW_INSTALL_DIR/wviewftpd
> > +test -x $FTPD_BIN || exit 7
> > +
> > +SSHD_BIN=$WVIEW_INSTALL_DIR/wviewsshd
> > +test -x $SSHD_BIN || exit 7
> > +
> > +ALARMD_BIN=$WVIEW_INSTALL_DIR/wvalarmd
> > +test -x $ALARMD_BIN || exit 8
> > +
> > +CWOPD_BIN=$WVIEW_INSTALL_DIR/wvcwopd
> > +test -x $CWOPD_BIN || exit 9
> 
> All those checks are useless, we now Buildroot will have installed
> those binaries.

ok

> 
> > +HTTP_BIN=$WVIEW_INSTALL_DIR/wvhttpd
> > +
> > +SQLD_BIN=$WVIEW_INSTALL_DIR/wviewsqld
> > +
> > +RADROUTER_BIN=$WVIEW_INSTALL_DIR/radmrouted
> > +
> > +PMOND_BIN=$WVIEW_INSTALL_DIR/wvpmond
> > +test -x $PMOND_BIN || exit 10
> > +
> > +WVIEWD_PID=$RUN_DIRECTORY/wviewd.pid
> > +HTMLD_PID=$RUN_DIRECTORY/htmlgend.pid
> > +FTPD_PID=$RUN_DIRECTORY/wviewftpd.pid
> > +SSHD_PID=$RUN_DIRECTORY/wviewsshd.pid
> > +ALARMD_PID=$RUN_DIRECTORY/wvalarmd.pid
> > +CWOPD_PID=$RUN_DIRECTORY/wvcwopd.pid
> > +HTTP_PID=$RUN_DIRECTORY/wvhttpd.pid
> > +SQLD_PID=$RUN_DIRECTORY/wviewsqld.pid
> > +RADROUTER_PID=$RUN_DIRECTORY/radmrouted.pid
> > +PMOND_PID=$RUN_DIRECTORY/wvpmond.pid
> > +
> > +wait_for_time_set() {
> > +    THOUSAND=1000
> > +    CURRVAL=`date +%s`
> > +    while [ "$CURRVAL" -lt "$THOUSAND" ]; do
> > +        sleep 1
> > +        CURRVAL=`date +%s`
> > +    done
> > +}
> 
> Why is this needed ?

I will investigate. 

> > +
> > +kill_running_processes() {
> > +       if [ -f $RADROUTER_PID ]; then
> > +               echo "radlib router pid file $RADROUTER_PID exists 
> > - killing existing process"
> > +               kill -15 `cat $RADROUTER_PID`
> > +               rm -f $RADROUTER_PID
> > +       fi
> > +       if [ -f $WVIEWD_PID ]; then
> > +               echo "wviewd pid file $WVIEWD_PID exists - killing
> > existing process"
> > +               kill -15 `cat $WVIEWD_PID`
> > +               rm -f $WVIEWD_PID
> > +       fi
> > +       if [ -f $HTMLD_PID ]; then
> > +               echo "htmlgend pid file $HTMLD_PID exists - killing
> > existing process"
> > +               kill -15 `cat $HTMLD_PID`
> > +               rm -f $HTMLD_PID
> > +       fi
> > +       if [ -f $FTPD_PID ]; then
> > +               echo "wviewftpd pid file $FTPD_PID exists - killing
> > existing process"
> > +               kill -15 `cat $FTPD_PID`
> > +               rm -f $FTPD_PID
> > +       fi
> > +       if [ -f $SSHD_PID ]; then
> > +               echo "wviewsshd pid file $SSHD_PID exists - killing
> > existing process"
> > +               kill -15 `cat $SSHD_PID`
> > +               rm -f $SSHD_PID
> > +       fi
> > +       if [ -f $ALARMD_PID ]; then
> > +               echo "wvalarmd pid file $ALARMD_PID exists -
> > killing existing process"
> > +               kill -15 `cat $ALARMD_PID`
> > +               rm -f $ALARMD_PID
> > +       fi
> > +       if [ -f $CWOPD_PID ]; then
> > +               echo "wvcwopd pid file $CWOPD_PID exists - killing
> > existing process"
> > +               kill -15 `cat $CWOPD_PID`
> > +               rm -f $CWOPD_PID
> > +       fi
> > +       if [ -f $HTTP_PID ]; then
> > +               echo "wvhttpd pid file $HTTP_PID exists - killing
> > existing process"
> > +               kill -15 `cat $HTTP_PID`
> > +               rm -f $HTTP_PID
> > +       fi
> > +       if [ -f $PMOND_PID ]; then
> > +               echo "wvpmond pid file $PMOND_PID exists - killing
> > existing process"
> > +               kill -15 `cat $PMOND_PID`
> > +               rm -f $PMOND_PID
> > +       fi
> 
> Please use start-stop-daemon instead of this code.

ok

> > +}
> > +
> > +case "$1" in
> > +  start)
> > +       kill_running_processes
> > +
> > +       wait_for_time_set
> > +
> > +       echo "Starting wview daemons:"
> > +
> > +       if [ -x $RADROUTER_BIN ]; then
> > +           $RADROUTER_BIN 1 $RUN_DIRECTORY
> > +       else
> > +           echo "Cannot find $RADROUTER_BIN - exiting!"
> > +           exit 10
> > +       fi
> > +       sleep 1
> > +       $WVIEWD_BIN
> > +       sleep 1
> > +       $HTMLD_BIN
> > +       $ALARMD_BIN
> > +       $CWOPD_BIN
> > +       $HTTP_BIN
> > +       $FTPD_BIN
> > +       $SSHD_BIN
> > +    $PMOND_BIN
> 
> Use start-stop-daemon.

ok

> +    ;;
> > +  start-trace)
> > +       kill_running_processes
> > +
> > +       echo "Starting wview daemons (tracing to $RUN_DIRECTORY):"
> > +       echo "Warning: traced processes run very slowly and may
> > effect performance."
> > +
> > +       if [ -x $RADROUTER_BIN ]; then
> > +           $RADROUTER_BIN 1 $RUN_DIRECTORY
> > +       else
> > +           echo "Cannot find $RADROUTER_BIN - exiting!"
> > +           exit 10
> > +       fi
> > +       sleep 1
> > +       strace -o $RUN_DIRECTORY/$WVIEWD_FILE.trace $WVIEWD_BIN -f
> > &> /dev/null &
> > +       sleep 1
> > +       strace -o $RUN_DIRECTORY/htmlgend.trace $HTMLD_BIN -f &>
> > /dev/null &
> > +       strace -o $RUN_DIRECTORY/wvalarmd.trace $ALARMD_BIN -f &>
> > /dev/null &
> > +       strace -o $RUN_DIRECTORY/wvcwopd.trace $CWOPD_BIN -f &>
> > /dev/null &
> > +       strace -o $RUN_DIRECTORY/wvhttpd.trace $HTTP_BIN -f &>
> > /dev/null &
> > +       strace -o $RUN_DIRECTORY/wviewftpd.trace $FTPD_BIN -f &>
> > /dev/null &
> > +       strace -o $RUN_DIRECTORY/wviewsshd.trace $SSHD_BIN -f &>
> > /dev/null &
> > +       strace -o $RUN_DIRECTORY/wvpmond.trace $PMOND_BIN -f &>
> > /dev/null &
> > +       ;;
> 
> Remove all of this.

ok 

> 
> > +  stop)
> > +       echo "Shutting down wview daemons..."
> > +       if [ -f $PMOND_PID ]; then
> > +           kill -15 `cat $PMOND_PID`
> > +       fi
> > +       if [ -f $HTTP_PID ]; then
> > +           kill -15 `cat $HTTP_PID`
> > +       fi
> > +       if [ -f $CWOPD_PID ]; then
> > +           kill -15 `cat $CWOPD_PID`
> > +       fi
> > +       if [ -f $ALARMD_PID ]; then
> > +           kill -15 `cat $ALARMD_PID`
> > +       fi
> > +       if [ -f $SSHD_PID ]; then
> > +           kill -15 `cat $SSHD_PID`
> > +       fi
> > +       if [ -f $FTPD_PID ]; then
> > +           kill -15 `cat $FTPD_PID`
> > +       fi
> > +       if [ -f $HTMLD_PID ]; then
> > +           kill -15 `cat $HTMLD_PID`
> > +       fi
> > +       if [ -f $WVIEWD_PID ]; then
> > +           kill -15 `cat $WVIEWD_PID`
> > +       fi
> > +       sleep 1
> > +       if [ -f $RADROUTER_PID ]; then
> > +           kill -15 `cat $RADROUTER_PID`
> > +       fi
> 
> Use start-stop-daemon, and remove kill_running_processes.



> > index 0000000..701bf9f
> > --- /dev/null
> > +++ b/package/wview/wview.hash
> > @@ -0,0 +1 @@
> > +sha256 
> >  460b34fcdf36f4905edf65e150ec83118e1e631c5532901feefcdc0266a27453 
> >  wview-5.21.7.tar.gz
> > diff --git a/package/wview/wview.mk b/package/wview/wview.mk
> > new file mode 100644
> > index 0000000..5f53ed0
> > --- /dev/null
> > +++ b/package/wview/wview.mk
> > @@ -0,0 +1,23 @@
> > +##################################################################
> > ##############
> > +#
> > +#  wview
> > +#
> > +##################################################################
> > ##############
> > +
> > +WVIEW_VERSION = 5.21.7
> > +WVIEW_SOURCE = wview-$(WVIEW_VERSION).tar.gz
> > +WVIEW_SITE = http://downloads.sourceforge.net/wview
> > +WVIEW_INSTALL_STAGING = YES
> > +WVIEW_LICENSE = GPL v2
> 
> Should be "GPLv2"
ok 

> > +WVIEW_LICENSE_FILES = COPYING
> > +VIEW_DEPENDENCIES = radlib libcurl gd libpng udev libusb openssl
> > mysql
> 
> VIEW_DEPENDENCIES is never taken into account since the variable
> prefix
> is not correct. This very mistake is a good indication that you have
> never built this package. 

Ok - my mistake.

> Whenever you submit a new package in
> Buildroot, please at least make sure that it builds fine in a
> configuration that has *only* this package selected in menuconfig,
> and
> that a build from scratch of this configuration works fine.

Apologies I thought I had, I clearly messed up - I usually do a 'rm -rf
output'.

> radlib doesn't exist in Buildroot.

radlib patch is in v5 on the BL mailing list.

> 
> You have "mysql" in this variable, but it is not selected in the
> Config.in file. Plus, I don't see any mysql use in the source code
> itself.

I will look into this, I am pretty sure it is required. I will confirm.

> 
> You need to add sqlite in there.

I will look into this.

> > +WVIEW_AUTORECONF = YES
> > +
> > +WVIEW_CONF_OPTS += --enable-mysql --prefix=$(STAGING_DIR)/usr
> 
> There is no --enable-mysql configuration option.
> 

I will look into this.

> Passing --prefix=$(STAGING_DIR)/usr is completely wrong. Leave -
> -prefix
> to its default value. If the program doesn't build with -
> -prefix=/usr,
> then something else is broken in the package Makefiles, and passing a
> different --prefix is 1/ papering over the problem and 2/ potentially
> harmful.

Yes - this is the same mess that there was radlib, have had to make
similar changes there. 

> 
> Hint: the problem is at least the -L$(prefix)/lib in the Makefile.am,
> as pointed above.
> 
> I've marked the patch as Changes Requested. Please resubmit a new
> version addressing the above issues. Thanks!

Thanks Thomas - apologies for the mess. 

> Thomas