From mboxrd@z Thu Jan 1 00:00:00 1970 From: Biagio Montaruli Date: Thu, 22 Sep 2016 11:50:33 +0200 Subject: [Buildroot] [PATCH 2/3] Patches for Arietta G25 board based on Buildroot 2016.08 In-Reply-To: <1474537834-6002-1-git-send-email-biagio.hkr@gmail.com> References: <1474537834-6002-1-git-send-email-biagio.hkr@gmail.com> Message-ID: <1474537834-6002-2-git-send-email-biagio.hkr@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net - configs/acmesystems_arietta_g25_128mb_defconfig, configs/acmesystems_arietta_g25_256mb_defconfig : update default configuration files for both 128MB and 256MB version - board/acmesystems/arietta-g25/genimage.cfg board/acmesystems/arietta-g25/post-image.sh : add support for genimage in order to build sdcard.img - board/acmesystems/arietta-g25/readme.txt : update documentation for Arietta G25 and add notes about how to build sdcard.img Signed-off-by: Biagio Montaruli --- board/acmesystems/arietta-g25/genimage.cfg | 12 ++++----- board/acmesystems/arietta-g25/post-image.sh | 4 +-- board/acmesystems/arietta-g25/readme.txt | 33 ++++++++++------------- configs/acmesystems_arietta_g25_128mb_defconfig | 36 ++++++++++++++----------- configs/acmesystems_arietta_g25_256mb_defconfig | 36 ++++++++++++++----------- 5 files changed, 63 insertions(+), 58 deletions(-) diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg index 1080b0e..420f1b6 100644 --- a/board/acmesystems/arietta-g25/genimage.cfg +++ b/board/acmesystems/arietta-g25/genimage.cfg @@ -1,18 +1,18 @@ # Minimal SD card image for the Acmesystems Arietta G25 -# + image boot.vfat { vfat { file zImage { image = "zImage" } - + file acme-arietta.dtb { - image = "at91-ariag25.dtb" + image = "at91-ariettag25.dtb" } - + file boot.bin { - image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin" - } + image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.6.bin" + } } size = 16M } diff --git a/board/acmesystems/arietta-g25/post-image.sh b/board/acmesystems/arietta-g25/post-image.sh index c82b189..2846f56 100755 --- a/board/acmesystems/arietta-g25/post-image.sh +++ b/board/acmesystems/arietta-g25/post-image.sh @@ -6,11 +6,9 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" rm -rf "${GENIMAGE_TMP}" -genimage \ +genimage \ --rootpath "${TARGET_DIR}" \ --tmppath "${GENIMAGE_TMP}" \ --inputpath "${BINARIES_DIR}" \ --outputpath "${BINARIES_DIR}" \ --config "${GENIMAGE_CFG}" - -exit $? diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt index 485e275..1899ca2 100644 --- a/board/acmesystems/arietta-g25/readme.txt +++ b/board/acmesystems/arietta-g25/readme.txt @@ -1,20 +1,10 @@ -Acmesystems Arietta G25 - -Intro -===== - -This default configuration will allow you to start experimenting with the -buildroot environment for the Arietta G25. With the current configuration -it will bring-up the board, and allow access through the serial console. - -You can find additional informations, tutorials and a very comprehensive -documentation on http://www.acmesystems.it/arietta. +Acme Systems Arietta G25 Build instructions ================== -To build an image for the arietta g25 choose the configuration -corresponding to the arietta variant. +To build an image for the Arietta G25 choose the configuration +corresponding to the Arietta variant. For 128MB RAM variant type: @@ -24,7 +14,11 @@ else for 256MB RAM variant type: $ make acmesystems_arietta_g25_256mb_defconfig -then: +To customize the configuration choosed type: + +$ make menuconfig + +When you are ready to start building Buildroot type: $ make @@ -34,12 +28,13 @@ How to write the microSD card Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. -Copy the bootable "sdcard.img" onto an SD card with "dd": +Write the bootable SD card image "sdcard.img" onto an SD card with "dd" command: $ sudo dd if=output/images/sdcard.img of=/dev/sdX -Insert the microSD card into the arietta slot and power it. +Insert the microSD card into the Arietta slot and power it. + +To get the kernel log messages you can use a DPI cable (http://www.acmesystems.it/DPI) -The image just built is fairly basic and the only output -you will get is on serial console, please consider to use a DPI -cable (http://www.acmesystems.it/DPI) +You can find additional informations, tutorials and a very comprehensive +documentation on http://www.acmesystems.it/arietta. diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig index e5ddf13..a68ac57 100644 --- a/configs/acmesystems_arietta_g25_128mb_defconfig +++ b/configs/acmesystems_arietta_g25_128mb_defconfig @@ -1,30 +1,36 @@ # Architecture BR2_arm=y -# Toolchain -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +# Kernel headers +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y -# Kernel +# System configuration +BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh" + +# Kernel configuration BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4" BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" -BR2_LINUX_KERNEL_XZ=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25" + +# Root filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs" -# Bootloader +# AT91bootstrap bootloader BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m" -# Image -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -# BR2_TARGET_ROOTFS_TAR is not set -BR2_PACKAGE_HOST_GENIMAGE=y +# Tools to build sdcard.img BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig index cf6f67b..ce9ebac 100644 --- a/configs/acmesystems_arietta_g25_256mb_defconfig +++ b/configs/acmesystems_arietta_g25_256mb_defconfig @@ -1,30 +1,36 @@ # Architecture BR2_arm=y -# Toolchain -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +# Kernel headers +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y -# Kernel +# System configuration +BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh" + +# Kernel configuration BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4" BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" -BR2_LINUX_KERNEL_XZ=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25" + +# Root filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs" -# Bootloader +# AT91bootstrap bootloader BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m" -# Image -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -# BR2_TARGET_ROOTFS_TAR is not set -BR2_PACKAGE_HOST_GENIMAGE=y +# Tools to build sdcard.img BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y -- 2.7.4