From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anuj Malviya Date: Wed, 13 Jun 2018 20:39:28 -0700 (MST) Subject: [Buildroot] udhcpc: no lease, failing Message-ID: <1528947568280-0.post@n4.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Friends I am getting this problem with Buildroot. Starting network: udhcpc: started, v1.27.2 [ 2.928374] net eth0: initializing cpsw version 1.12 (0) [ 2.933951] net eth0: initialized cpsw ale version 1.4 [ 2.939382] net eth0: ALE Table size 1024 [ 2.945195] libphy: PHY 4a101000.mdio:00 not found [ 2.950239] net eth0: phy "4a101000.mdio:00" not found on slave 0, err -19 [ 2.957426] libphy: PHY 4a101000.mdio:01 not found [ 2.962456] net eth0: phy "4a101000.mdio:01" not found on slave 1, err -19 [ 2.980308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: no lease, failing Failed to bring up eth0. FAIL Starting dhcpcd... no interfaces have a carrier forked to background, child pid 149 Starting Network Interface Plugging Daemon: eth0. Starting ntpd: OK Starting dropbear sshd: [ 12.722674] random: dropbear: uninitialized urandom read (32 bytes read, 29 bits of entropy available) OK Starting vsftpd: OK Welcome to Buildroot buildroot login: root Password: # ifconfig eth0 Link encap:Ethernet HWaddr E8:EB:11:28:E6:73 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:174 The IP does not get assigned and I have power reboot my system couple of times to get the IP assignment. I am using 4.4.41 kernel version and glibc. I read in earlier posts that this problem occurs with is uclibc, not sure of the solution , any pointers will be of great help. Br Anuj -- Sent from: http://buildroot-busybox.2317881.n4.nabble.com/