From mboxrd@z Thu Jan 1 00:00:00 1970 From: sunil at amarulasolutions.com Date: Sun, 3 May 2020 14:41:16 +0530 Subject: [Buildroot] [PATCH v2 1/2] configs/rockpro64: new defconfig In-Reply-To: <1588497077-27220-1-git-send-email-sunil@amarulasolutions.com> References: <20200502233409.4a90d4b2@windsurf.home> <1588497077-27220-1-git-send-email-sunil@amarulasolutions.com> Message-ID: <1588497077-27220-2-git-send-email-sunil@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net From: Suniel Mahesh A defconfig for the rockpro64 was added in 59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32 compiler was needed to build ATF, and this was not supported back then. Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced. Following new changes are introduced in comparision with the older changeset: - renamed defconfig from pine64_rockpro64 to rockpro64 - updated readme - using a GPT partition layout - update defconfig to build ATF - bump u-boot to 2020.04 - bump linux to 5.4.35 Signed-off-by: Suniel Mahesh --- Changes for v2: - merged this patch @ http://patchwork.ozlabs.org/project/buildroot/list/?series=174156 into this series. - change contact for just only rockpro64. - As suggested by Thomas Pettazzoni, rk3399 targets does not need pylibfdt or pyelftools, but only a host Python interpreter. Remove them and add python, python3 in defconfig. --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/pine64/rockpro64/extlinux.conf | 4 +++ board/pine64/rockpro64/genimage.cfg | 39 +++++++++++++++++++++++ board/pine64/rockpro64/post-build.sh | 5 +++ board/pine64/rockpro64/readme.txt | 60 ++++++++++++++++++++++++++++++++++++ configs/rockpro64_defconfig | 56 +++++++++++++++++++++++++++++++++ 7 files changed, 167 insertions(+) create mode 100644 board/pine64/rockpro64/extlinux.conf create mode 100644 board/pine64/rockpro64/genimage.cfg create mode 100755 board/pine64/rockpro64/post-build.sh create mode 100644 board/pine64/rockpro64/readme.txt create mode 100644 configs/rockpro64_defconfig diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index fa8e077..32c3247 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -318,6 +318,7 @@ raspberrypi_defconfig: { extends: .defconfig } riotboard_defconfig: { extends: .defconfig } roc_pc_rk3399_defconfig: { extends: .defconfig } rock64_defconfig: { extends: .defconfig } +rockpro64_defconfig: { extends: .defconfig } roseapplepi_defconfig: { extends: .defconfig } s6lx9_microboard_defconfig: { extends: .defconfig } sheevaplug_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index e427ab1..2b562d5 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2425,7 +2425,9 @@ F: package/powertop/ N: Suniel Mahesh F: board/firefly/ +F: board/pine64/rockpro64 F: configs/roc_pc_rk3399_defconfig +F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/ N: Sven Haardiek diff --git a/board/pine64/rockpro64/extlinux.conf b/board/pine64/rockpro64/extlinux.conf new file mode 100644 index 0000000..ea081a1 --- /dev/null +++ b/board/pine64/rockpro64/extlinux.conf @@ -0,0 +1,4 @@ +label RK3399_ROCKPRO64 linux + kernel /Image + devicetree /rk3399-rockpro64.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg new file mode 100644 index 0000000..41358ed --- /dev/null +++ b/board/pine64/rockpro64/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-rockpro64.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/pine64/rockpro64/post-build.sh b/board/pine64/rockpro64/post-build.sh new file mode 100755 index 0000000..ba29375 --- /dev/null +++ b/board/pine64/rockpro64/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/pine64/rockpro64/readme.txt b/board/pine64/rockpro64/readme.txt new file mode 100644 index 0000000..de86970 --- /dev/null +++ b/board/pine64/rockpro64/readme.txt @@ -0,0 +1,60 @@ +PINE64 ROCKPro64 +================ +https://www.pine64.org/rockpro64/ + +Build: +====== + $ make rockpro64_defconfig + $ make + +Files created in output directory +================================= + +output/images + +????????? bl31.elf +????????? boot.vfat +????????? extlinux +????????? idbloader.img +????????? Image +????????? rk3399-rockpro64.dtb +????????? rootfs.ext2 +????????? rootfs.ext4 -> rootfs.ext2 +????????? rootfs.tar +????????? sdcard.img +????????? u-boot.bin +????????? u-boot.itb + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== +RockPro64 has a 40-pin PI-2 GPIO Bus. + +Connect a jumper between pin 23 and pin 25 for SD card boot. + +Serial console: +--------------- +The pin layout for serial console on PI-2 GPIO Bus is as follows: + +pin 6: gnd +pin 8: tx +pin 10: rx + +Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the +power is on then connect pin 10(receive). + +Baudrate for this board is 1500000. + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html diff --git a/configs/rockpro64_defconfig b/configs/rockpro64_defconfig new file mode 100644 index 0000000..6721349 --- /dev/null +++ b/configs/rockpro64_defconfig @@ -0,0 +1,56 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.35" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpro64" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPRO64..!!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="64M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh" -- 2.7.4