From mboxrd@z Thu Jan 1 00:00:00 1970 From: sunil at amarulasolutions.com Date: Sun, 3 May 2020 14:41:17 +0530 Subject: [Buildroot] [PATCH v2 2/2] configs/orangepi_rk3399: new defconfig In-Reply-To: <1588497077-27220-1-git-send-email-sunil@amarulasolutions.com> References: <20200502233409.4a90d4b2@windsurf.home> <1588497077-27220-1-git-send-email-sunil@amarulasolutions.com> Message-ID: <1588497077-27220-3-git-send-email-sunil@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net From: Suniel Mahesh Add initial support for Orangepi RK3399 target with below features: - U-Boot 2020.04 - Linux 5.4.35 - Default packages from buildroot Signed-off-by: Suniel Mahesh --- Changes for v2: - change contact for just only orangepi-rk3399. - As suggested by Thomas Pettazzoni, rk3399 targets does not need pylibfdt or pyelftools, but only a host Python interpreter. Remove them and add python, python3 in defconfig. --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 + board/orangepi/orangepi-rk3399/extlinux.conf | 4 ++ board/orangepi/orangepi-rk3399/genimage.cfg | 39 +++++++++++++++++++ board/orangepi/orangepi-rk3399/post-build.sh | 5 +++ board/orangepi/orangepi-rk3399/readme.txt | 56 ++++++++++++++++++++++++++++ configs/orangepi_rk3399_defconfig | 56 ++++++++++++++++++++++++++++ 7 files changed, 163 insertions(+) create mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf create mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg create mode 100755 board/orangepi/orangepi-rk3399/post-build.sh create mode 100644 board/orangepi/orangepi-rk3399/readme.txt create mode 100644 configs/orangepi_rk3399_defconfig diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 32c3247..d7a8c4a 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -258,6 +258,7 @@ orangepi_pc_plus_defconfig: { extends: .defconfig } orangepi_plus_defconfig: { extends: .defconfig } orangepi_prime_defconfig: { extends: .defconfig } orangepi_r1_defconfig: { extends: .defconfig } +orangepi_rk3399_defconfig: { extends: .defconfig } orangepi_win_defconfig: { extends: .defconfig } orangepi_zero_defconfig: { extends: .defconfig } orangepi_zero_plus2_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 2b562d5..b9ace0e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2425,7 +2425,9 @@ F: package/powertop/ N: Suniel Mahesh F: board/firefly/ +F: board/orangepi/orangepi-rk3399 F: board/pine64/rockpro64 +F: configs/orangepi_rk3399_defconfig F: configs/roc_pc_rk3399_defconfig F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/ diff --git a/board/orangepi/orangepi-rk3399/extlinux.conf b/board/orangepi/orangepi-rk3399/extlinux.conf new file mode 100644 index 0000000..81a325a --- /dev/null +++ b/board/orangepi/orangepi-rk3399/extlinux.conf @@ -0,0 +1,4 @@ +label ORANGEPI_RK3399 linux + kernel /Image + devicetree /rk3399-orangepi.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait diff --git a/board/orangepi/orangepi-rk3399/genimage.cfg b/board/orangepi/orangepi-rk3399/genimage.cfg new file mode 100644 index 0000000..9d63e30 --- /dev/null +++ b/board/orangepi/orangepi-rk3399/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-orangepi.dtb", + "extlinux" + } + } + size = 112M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/orangepi/orangepi-rk3399/post-build.sh b/board/orangepi/orangepi-rk3399/post-build.sh new file mode 100755 index 0000000..ba29375 --- /dev/null +++ b/board/orangepi/orangepi-rk3399/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/orangepi/orangepi-rk3399/readme.txt b/board/orangepi/orangepi-rk3399/readme.txt new file mode 100644 index 0000000..8f9ac1a --- /dev/null +++ b/board/orangepi/orangepi-rk3399/readme.txt @@ -0,0 +1,56 @@ +OrangePI RK3399 +================ +http://www.orangepi.org/Orange%20Pi%20RK3399/ + +Build: +====== + $ make orangepi_rk3399_defconfig + $ make + +Files created in output directory +================================= + +output/images + +????????? bl31.elf +????????? boot.vfat +????????? extlinux +????????? idbloader.img +????????? Image +????????? rk3399-orangepi.dtb +????????? rootfs.ext2 +????????? rootfs.ext4 -> rootfs.ext2 +????????? rootfs.tar +????????? sdcard.img +????????? u-boot.bin +????????? u-boot.itb + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== +Orangepi-RK3399 by default boots from emmc. For SD card boot to +happen, emmc should be empty. If emmc happens to have any bootable +image then erase emmc so that bootrom will look for a proper image in SD. + +emmc can be erased once after booted into linux as shown in below link. + +https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html + +Serial console: +--------------- + +Baudrate for this board is 1500000. + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/orangepi.html diff --git a/configs/orangepi_rk3399_defconfig b/configs/orangepi_rk3399_defconfig new file mode 100644 index 0000000..cd6a9db --- /dev/null +++ b/configs/orangepi_rk3399_defconfig @@ -0,0 +1,56 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.35" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-orangepi" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="orangepi-rk3399" +BR2_TARGET_GENERIC_ISSUE="Welcome to ORANGEPI-RK3399..!!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="64M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-rk3399/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-rk3399/post-build.sh" -- 2.7.4