From: Thomas De Schampheleire <patrickdepinguin@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/1] Openpowerlink: new package
Date: Sat, 21 Sep 2013 11:41:31 +0200 [thread overview]
Message-ID: <1a79dc2d-e40d-441e-a579-6f029b14dedb@email.android.com> (raw)
In-Reply-To: <681556336.7308664.1379724486354.JavaMail.root@openwide.fr>
Romain Naour <romain.naour@openwide.fr> schreef:
>
>Signed-off-by: Romain Naour <romain.naour@openwide.fr>
>---
> package/Config.in | 1 +
>package/openpowerlink/Config.in | 92
>+++++++++++++++++++++
> .../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++
>package/openpowerlink/openpowerlink.mk | 93
>++++++++++++++++++++++
> 4 files changed, 213 insertions(+)
> create mode 100644 package/openpowerlink/Config.in
>create mode 100644
>package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
> create mode 100644 package/openpowerlink/openpowerlink.mk
>
>diff --git a/package/Config.in b/package/Config.in
>index e1dfd5d..fdf9b55 100644
>--- a/package/Config.in
>+++ b/package/Config.in
>@@ -912,6 +912,7 @@ endmenu
> menu "Real-Time"
> source "package/xenomai/Config.in"
> source "package/rtai/Config.in"
>+source "package/openpowerlink/Config.in"
> endmenu
>
> menu "Shell and utilities"
>diff --git a/package/openpowerlink/Config.in
>b/package/openpowerlink/Config.in
>new file mode 100644
>index 0000000..42a6099
>--- /dev/null
>+++ b/package/openpowerlink/Config.in
>@@ -0,0 +1,92 @@
>+comment "openpowerlink requires thread support in toolchain"
>+ depends on !BR2_TOOLCHAIN_HAS_THREADS
>+
>+config BR2_PACKAGE_OPENPOWERLINK
>+ bool "Openpowerlink"
>+ depends on BR2_TOOLCHAIN_HAS_THREADS
>+ depends on BR2_i386 || BR2_x86_64
>+ help
>+ openPOWERLINK is an Open Source Industrial Ethernet
>+ stack implementing the POWERLINK protocol for Managing Node
>+ (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave).
>+
>+ It is provided by SYSTEC electronic
>(http://www.systec-electronic.com),
>+ B&R (http://www.br-automation.com) and
>+ Kalycito (http://www.kalycito.com).
>+
>+if BR2_PACKAGE_OPENPOWERLINK
>+
>+choice
>+ prompt "Openpowerlink mode"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP
>+ bool "userspace stack"
>+ select BR2_PACKAGE_LIBPCAP
>+
>+config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
>+ bool "kernel stack"
>+ depends on BR2_LINUX_KERNEL
>+ help
>+ You may select BR2_PACKAGE_PCIUTILS for lscpi, and
>BR2_PACKAGE_PROCPS for ps command.
>+ These commands are used in EplLoad and EplUndload scripts.
>+
>+endchoice
>+
>+if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
>+
>+choice
>+ prompt "Select Ethernet Powerlink Driver"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_82573
>+ bool "Intel 82573"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_8255x
>+ bool "Intel 8255x"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_RTL8139
>+ bool "Realteck RTL-8139"
>+
>+endchoice
>+
>+endif
>+
>+choice
>+ prompt "Select MN/CN mode"
>+
>+ config BR2_PACKAGE_OPENPOWERLINK_MN
>+ bool "MN"
>+ help
>+ Enable Managing Node mode
>+
>+ config BR2_PACKAGE_OPENPOWERLINK_CN
>+ bool "CN"
>+ help
>+ Enable Controlled Node mode
>+
>+endchoice
>+
>+# Powerlink Demos
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE
>+ bool "Console MN demo"
>+ depends on BR2_PACKAGE_OPENPOWERLINK_MN
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT
>+ bool "QT MN demo"
>+ depends on BR2_PACKAGE_OPENPOWERLINK_MN
>+ select BR2_PACKAGE_QT
>+ select BR2_PACKAGE_QT_STL
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE
>+ bool "Console CN demo"
>+ depends on !BR2_PACKAGE_OPENPOWERLINK_MN
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL
>+ bool "Kernel demo"
>+ depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
>+ string "Debug level for EPL"
>+ help
>+ default value: 0xEC000000L
>+
>+endif
>diff --git a/package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
>b/package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
>new file mode 100644
>index 0000000..a71298d
>--- /dev/null
>+++ b/package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
>@@ -0,0 +1,27 @@
>+From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001
>+From: Romain Naour <romain.naour@openwide.fr>
>+Date: Wed, 18 Sep 2013 23:33:04 +0200
>+Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sources
>list
>+
>+demo_mn_qt use EplGetEmergErrCodeStr()
>+
>+Signed-off-by: Romain Naour <romain.naour@openwide.fr>
>+---
>+ Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 +
>+ 1 file changed, 1 insertion(+)
>+
>+diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>+index 9db2f7f..48ae9eb 100644
>+--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>+@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp
>+ src/MainWindow.cpp
>+ src/NodeState.cpp
>+
>${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
>++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c
>+ )
>+
>+ # The TRACE macros need trace.c on the Windows platform
>+--
>+1.8.4
>+
>diff --git a/package/openpowerlink/openpowerlink.mk
>b/package/openpowerlink/openpowerlink.mk
>new file mode 100644
>index 0000000..ac28de9
>--- /dev/null
>+++ b/package/openpowerlink/openpowerlink.mk
>@@ -0,0 +1,93 @@
>+################################################################################
>+#
>+# openPOWERLINK
>+#
>+################################################################################
>+
>+OPENPOWERLINK_VERSION = V1.08.3
>+OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
>+OPENPOWERLINK_SITE =
>http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
>+
>+OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
>+OPENPOWERLINK_LICENSE_FILES = license.txt
>+OPENPOWERLINK_INSTALL_STAGING = YES
>+
>+ifeq ($(BR2_i386),y)
>+OPENPOWERLINK_ARCH = x86
>+endif
>+
>+ifeq ($(BR2_x86_64),y)
>+OPENPOWERLINK_ARCH = x86_64
>+endif
>+
>+OPENPOWERLINK_CONF_OPT =
>-DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/
>+
>+OPENPOWERLINK_DEBUG_LEVEL = $(call
>qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
>+
>+ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),)
>+OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000L
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL)
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y)
>+# use the user space stack (libpcap)
>+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF
>+OPENPOWERLINK_DEPENDENCIES = libpcap
>+else
>+# use the kernel stack
>+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON
>+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR)
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION)
>+OPENPOWERLINK_DEPENDENCIES = linux
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573
>+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139
>+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON
>+OPENPOWERLINK_DEPENDENCIES += qt
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF
>+endif
>+
>+define OPENPOWERLINK_EXTRACT_CMDS
>+ $(RM) -rf $(OPENPOWERLINK_DIR)
>+ unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE)
>+ test -d $(OPENPOWERLINK_DIR) || \
>+ mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE))
>$(OPENPOWERLINK_DIR)
>+endef
>+
>+$(eval $(cmake-package))
Why is this so hard?
prev parent reply other threads:[~2013-09-21 9:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1165322922.7308619.1379724109699.JavaMail.root@openwide.fr>
2013-09-21 0:48 ` [Buildroot] [PATCH 1/1] Openpowerlink: new package Romain Naour
2013-09-21 7:16 ` Thomas De Schampheleire
2013-09-21 7:42 ` Thomas Petazzoni
2013-09-21 10:19 ` Romain Naour
2013-09-21 8:15 ` Thomas De Schampheleire
2013-09-22 13:43 ` Thomas Petazzoni
2013-09-23 11:34 ` Thomas De Schampheleire
2013-09-23 12:13 ` Thomas Petazzoni
2013-09-21 8:17 ` Thomas De Schampheleire
2013-09-22 8:20 ` Thomas Petazzoni
2013-09-21 9:38 ` Thomas De Schampheleire
2013-09-21 9:41 ` Thomas De Schampheleire [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1a79dc2d-e40d-441e-a579-6f029b14dedb@email.android.com \
--to=patrickdepinguin@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox