From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tobias Arp Date: Wed, 22 Feb 2012 13:17:15 +0100 (CET) Subject: [Buildroot] Build udev for arm -> accept4 undefined reference Message-ID: <2003448875.2770578.1329913035731.JavaMail.fmail@mwmweb054> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, i am trying to use buildroot-2012.02-rc2 with the attached config file for an arm processor. My custom toolchain was build with crosstool-NG with this config: arm-unknown-linux-gnueabi kernel-headers: linux 3.0 binutils 2.19.1 gcc 4.3.2 glibc 2.9 But when udev should be linked i get following error messages: src/src_udevd-udev-ctrl.o: In function `udev_ctrl_get_connection': udev-ctrl.c:(.text+0x744): undefined reference to `accept4' collect2: ld returned 1 exit status src/src_udevadm-udev-ctrl.o: In function `udev_ctrl_get_connection': udev-ctrl.c:(.text+0x744): undefined reference to `accept4' collect2: ld returned 1 exit status I do not understand why this happens because accept4 does exist (in the toolchain kernel header files) and in the target kernel header file (kernel 3.2). I have seen the older messages about this issue but i cannot solve it. Best regards and thanks in advance Tobias # # Automatically generated make config: don't edit # Buildroot 2012.02-rc2 Configuration # BR2_HAVE_DOT_CONFIG=y BR2_arm=y # BR2_armeb is not set # BR2_avr32 is not set # BR2_bfin is not set # BR2_i386 is not set # BR2_mips is not set # BR2_mipsel is not set # BR2_powerpc is not set # BR2_sh is not set # BR2_sh64 is not set # BR2_sparc is not set # BR2_x86_64 is not set # BR2_xtensa is not set # BR2_generic_arm is not set # BR2_arm7tdmi is not set # BR2_arm610 is not set # BR2_arm710 is not set # BR2_arm720t is not set BR2_arm920t=y # BR2_arm922t is not set # BR2_arm926t is not set # BR2_arm10t is not set # BR2_arm1136jf_s is not set # BR2_arm1176jz_s is not set # BR2_arm1176jzf_s is not set # # cortex-A8/A9 needs gcc >= 4.4.x # # BR2_cortex_a8 is not set # BR2_cortex_a9 is not set # BR2_sa110 is not set # BR2_sa1100 is not set # BR2_xscale is not set # BR2_iwmmxt is not set BR2_ARM_TYPE="ARM920T" BR2_ARM_EABI=y # BR2_ARM_OABI is not set BR2_ARCH="arm" BR2_ENDIAN="LITTLE" BR2_GCC_TARGET_TUNE="arm920t" BR2_GCC_TARGET_ARCH="armv4t" BR2_GCC_TARGET_ABI="aapcs-linux" # # Build options # # # Commands # BR2_WGET="wget --passive-ftp -nd -t 3" BR2_SVN="svn" BR2_BZR="bzr" BR2_GIT="git" BR2_LOCALFILES="cp" BR2_SCP="scp" BR2_SSH="ssh" BR2_HG="hg" BR2_ZCAT="gzip -d -c" BR2_BZCAT="bzcat" BR2_XZCAT="xzcat" BR2_TAR_OPTIONS="" BR2_DL_DIR="$(TOPDIR)/dl" BR2_HOST_DIR="$(BASE_DIR)/host" # # Mirrors and Download locations # BR2_PRIMARY_SITE="" BR2_BACKUP_SITE="http://sources.buildroot.net/" BR2_SOURCEFORGE_MIRROR="kent" BR2_KERNEL_MIRROR="http://www.kernel.org/pub/" BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu" BR2_DEBIAN_MIRROR="http://ftp.debian.org" BR2_JLEVEL=2 # BR2_CCACHE is not set # BR2_DEPRECATED is not set # BR2_ENABLE_DEBUG is not set BR2_STRIP_strip=y # BR2_STRIP_sstrip is not set # BR2_STRIP_none is not set # BR2_OPTIMIZE_0 is not set # BR2_OPTIMIZE_1 is not set # BR2_OPTIMIZE_2 is not set # BR2_OPTIMIZE_3 is not set BR2_OPTIMIZE_S=y # BR2_PREFER_STATIC_LIB is not set # BR2_HAVE_DOCUMENTATION is not set # BR2_HAVE_DEVFILES is not set BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk" # # Toolchain # # BR2_TOOLCHAIN_BUILDROOT is not set BR2_TOOLCHAIN_EXTERNAL=y # BR2_TOOLCHAIN_CTNG is not set # BR2_KERNEL_HEADERS_2_6_35 is not set # BR2_KERNEL_HEADERS_2_6_36 is not set # BR2_KERNEL_HEADERS_2_6_37 is not set # BR2_KERNEL_HEADERS_2_6_38 is not set # BR2_KERNEL_HEADERS_2_6_39 is not set # BR2_KERNEL_HEADERS_3_0 is not set # BR2_KERNEL_HEADERS_3_1 is not set # BR2_KERNEL_HEADERS_3_2 is not set # BR2_KERNEL_HEADERS_VERSION is not set # BR2_KERNEL_HEADERS_SNAP is not set # BR2_UCLIBC_VERSION_0_9_31 is not set # BR2_UCLIBC_VERSION_0_9_32 is not set # BR2_UCLIBC_VERSION_0_9_33 is not set # BR2_UCLIBC_VERSION_SNAPSHOT is not set # BR2_BINUTILS_VERSION_2_20 is not set # BR2_BINUTILS_VERSION_2_20_1 is not set # BR2_BINUTILS_VERSION_2_21 is not set # BR2_BINUTILS_VERSION_2_21_1 is not set # BR2_BINUTILS_VERSION_2_22 is not set # BR2_GCC_VERSION_4_3_X is not set # BR2_GCC_VERSION_4_4_X is not set # BR2_GCC_VERSION_4_5_X is not set # BR2_GCC_VERSION_4_6_X is not set # BR2_GCC_VERSION_SNAP is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103 is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201009 is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2010Q1 is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3 is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q1 is not set BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y BR2_TOOLCHAIN_EXTERNAL_PATH="/home/tobias/entwicklung/arm/compiler/4.3.2" BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="$(ARCH)-linux" BR2_TOOLCHAIN_EXTERNAL_PREFIX="$(ARCH)-linux" BR2_TOOLCHAIN_EXTERNAL_GLIBC=y # BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC is not set BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y # BR2_TOOLCHAIN_EXTERNAL_CXX is not set BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS="" # BR2_TOOLCHAIN_CTNG_uClibc is not set # BR2_TOOLCHAIN_CTNG_eglibc is not set # BR2_TOOLCHAIN_CTNG_glibc is not set # BR2_TOOLCHAIN_CTNG_THREADS_NONE is not set # BR2_TOOLCHAIN_CTNG_THREADS_PTHREADS is not set # BR2_TOOLCHAIN_CTNG_THREADS_PTHREADS_OLD is not set # BR2_TOOLCHAIN_CTNG_THREADS_NPTL is not set # # Gdb Options # # BR2_PACKAGE_GDB is not set # BR2_PACKAGE_GDB_SERVER is not set BR2_LARGEFILE=y BR2_INET_IPV6=y BR2_INET_RPC=y BR2_USE_WCHAR=y BR2_ENABLE_LOCALE=y BR2_TOOLCHAIN_HAS_THREADS=y BR2_TOOLCHAIN_HAS_THREADS_DEBUG=y BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED=y BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y # BR2_ENABLE_LOCALE_PURGE is not set BR2_USE_MMU=y BR2_PREFER_SOFT_FLOAT=y BR2_SOFT_FLOAT=y BR2_TARGET_OPTIMIZATION="-pipe" BR2_TARGET_LDFLAGS="" # BR2_PTHREADS_NONE is not set # BR2_PTHREADS is not set # BR2_PTHREADS_OLD is not set # BR2_PTHREADS_NATIVE is not set # # System configuration # BR2_TARGET_GENERIC_HOSTNAME="camdisc" BR2_TARGET_GENERIC_ISSUE="Welcome to CamDisc" # BR2_ROOTFS_DEVICE_CREATION_STATIC is not set # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt" BR2_ROOTFS_SKELETON_DEFAULT=y # BR2_ROOTFS_SKELETON_CUSTOM is not set BR2_TARGET_GENERIC_GETTY_PORT="ttyAM1" # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200" BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y BR2_ROOTFS_POST_BUILD_SCRIPT="" # # Package Selection for the target # BR2_PACKAGE_BUSYBOX=y # BR2_BUSYBOX_VERSION_1_18_X is not set BR2_BUSYBOX_VERSION_1_19_X=y # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set BR2_BUSYBOX_VERSION="1.19.4" BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.19.x.config" # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set # BR2_PACKAGE_CUSTOMIZE is not set # # Audio and video libraries and applications # # BR2_PACKAGE_ALSA_LIB is not set # BR2_PACKAGE_ALSA_UTILS is not set # BR2_PACKAGE_AUMIX is not set # BR2_PACKAGE_FAAD2 is not set # BR2_PACKAGE_FLAC is not set # BR2_PACKAGE_FFMPEG is not set # BR2_PACKAGE_GSTREAMER is not set # BR2_PACKAGE_LAME is not set # BR2_PACKAGE_LIBAO is not set # BR2_PACKAGE_LIBCDAUDIO is not set # BR2_PACKAGE_LIBCUE is not set # BR2_PACKAGE_LIBCUEFILE is not set # BR2_PACKAGE_LIBDVDREAD is not set # BR2_PACKAGE_LIBDVDNAV is not set # BR2_PACKAGE_LIBID3TAG is not set # BR2_PACKAGE_LIBMAD is not set # BR2_PACKAGE_LIBMMS is not set # BR2_PACKAGE_LIBMPD is not set # BR2_PACKAGE_LIBMPEG2 is not set # BR2_PACKAGE_LIBOGG is not set # BR2_PACKAGE_LIBPLAYER is not set # BR2_PACKAGE_LIBREPLAYGAIN is not set # BR2_PACKAGE_LIBSAMPLERATE is not set # BR2_PACKAGE_LIBSNDFILE is not set # BR2_PACKAGE_LIBTHEORA is not set # BR2_PACKAGE_LIBVORBIS is not set # # Live555 needs C++ compiler # # BR2_PACKAGE_MADPLAY is not set # # mpd requires a toolchain with C++ and WCHAR support # # BR2_PACKAGE_MPG123 is not set # BR2_PACKAGE_MPLAYER is not set # BR2_PACKAGE_MUSEPACK is not set # BR2_PACKAGE_PORTAUDIO is not set # BR2_PACKAGE_PULSEAUDIO is not set # BR2_PACKAGE_SPEEX is not set # # taglib requires a toolchain with C++ support enabled # # BR2_PACKAGE_TREMOR is not set # BR2_PACKAGE_VORBIS_TOOLS is not set # BR2_PACKAGE_WAVPACK is not set # # Compressors and decompressors # # BR2_PACKAGE_BZIP2 is not set # BR2_PACKAGE_LZOP is not set # BR2_PACKAGE_XZ is not set # # Debugging, profiling and benchmark # # # bonnie++ requires a toolchain with C++ support enabled # # BR2_PACKAGE_DHRYSTONE is not set # BR2_PACKAGE_DSTAT is not set # BR2_PACKAGE_DMALLOC is not set # BR2_PACKAGE_KEXEC is not set # BR2_PACKAGE_LMBENCH is not set # BR2_PACKAGE_LSOF is not set # BR2_PACKAGE_LTP_TESTSUITE is not set # BR2_PACKAGE_LTRACE is not set # BR2_PACKAGE_MEMSTAT is not set # BR2_PACKAGE_NETPERF is not set # # oprofile requires a toolchain with C++ support enabled # # BR2_PACKAGE_RT_TESTS is not set # BR2_PACKAGE_STRACE is not set # BR2_PACKAGE_WHETSTONE is not set # BR2_PACKAGE_PV is not set # # Development tools # # BR2_PACKAGE_AUTOCONF is not set # BR2_PACKAGE_AUTOMAKE is not set # BR2_PACKAGE_BINUTILS is not set # BR2_PACKAGE_BISON is not set # BR2_PACKAGE_BSDIFF is not set # BR2_PACKAGE_CCACHE is not set # BR2_PACKAGE_CVS is not set # BR2_PACKAGE_DISTCC is not set # BR2_PACKAGE_FLEX is not set # BR2_PACKAGE_GMP is not set # # gperf requires a toolchain with C++ support enabled # # BR2_PACKAGE_MAKE is not set # BR2_PACKAGE_MPC is not set # BR2_PACKAGE_MPFR is not set # BR2_PACKAGE_LIBTOOL is not set # BR2_PACKAGE_M4 is not set # BR2_PACKAGE_PKG_CONFIG is not set # BR2_PACKAGE_SSTRIP is not set # # Games # # BR2_PACKAGE_GNUCHESS is not set # BR2_PACKAGE_PRBOOM is not set # # Graphic libraries and applications (graphic/text) # # # Graphic applications # # BR2_PACKAGE_RRDTOOL is not set # # graphic libraries # # BR2_PACKAGE_DIRECTFB is not set # BR2_PACKAGE_FBDUMP is not set # BR2_PACKAGE_FBGRAB is not set # BR2_PACKAGE_FBV is not set # BR2_PACKAGE_IMAGEMAGICK is not set # BR2_PACKAGE_SDL is not set # # other GUIs # # BR2_PACKAGE_EFL is not set # # qt requires a toolchain with C++ support enabled # # BR2_PACKAGE_XORG7 is not set # # X libraries and helper libraries # # BR2_PACKAGE_LIBERATION is not set # # X Window managers # # # X applications # # BR2_PACKAGE_GOB2 is not set # # midori requires C++, WCHAR in toolchain and libgtk2 # # BR2_PACKAGE_VALA is not set # # Hardware handling # # BR2_PACKAGE_CDRKIT is not set # BR2_PACKAGE_CRAMFS is not set # BR2_PACKAGE_DBUS is not set # BR2_PACKAGE_DMRAID is not set # BR2_PACKAGE_DOSFSTOOLS is not set # BR2_PACKAGE_E2FSPROGS is not set # BR2_PACKAGE_EEPROG is not set # BR2_PACKAGE_FCONFIG is not set # BR2_PACKAGE_FIS is not set # BR2_PACKAGE_GADGETFS_TEST is not set # # gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled # # BR2_PACKAGE_GENEXT2FS is not set # BR2_PACKAGE_GENROMFS is not set # BR2_PACKAGE_GPSD is not set # BR2_PACKAGE_GVFS is not set # BR2_PACKAGE_HWDATA is not set # BR2_PACKAGE_I2C_TOOLS is not set # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set # BR2_PACKAGE_INPUT_TOOLS is not set # BR2_PACKAGE_IOSTAT is not set # BR2_PACKAGE_IRDA_UTILS is not set # BR2_PACKAGE_KBD is not set # BR2_PACKAGE_LINUX_FIRMWARE is not set # BR2_PACKAGE_LM_SENSORS is not set # BR2_PACKAGE_LSUIO is not set # BR2_PACKAGE_LVM2 is not set # BR2_PACKAGE_MAKEDEVS is not set # BR2_PACKAGE_MDADM is not set # BR2_PACKAGE_MEMTESTER is not set # BR2_PACKAGE_MTD is not set BR2_PACKAGE_NTFS_3G=y # BR2_PACKAGE_NTFS_3G_ENCRYPTED is not set BR2_PACKAGE_NTFS_3G_NTFSPROGS=y # BR2_PACKAGE_OPEN2300 is not set # BR2_PACKAGE_OPENOCD is not set # BR2_PACKAGE_PCIUTILS is not set BR2_PACKAGE_PICOCOM=y # BR2_PACKAGE_RNG_TOOLS is not set # BR2_PACKAGE_SANE_BACKENDS is not set # BR2_PACKAGE_SDPARM is not set BR2_PACKAGE_SETSERIAL=y # # smartmontools requires a toolchain with C++ support enabled # # BR2_PACKAGE_SQUASHFS is not set # BR2_PACKAGE_SREDIRD is not set # BR2_PACKAGE_SSHFS is not set # BR2_PACKAGE_STATSERIAL is not set # BR2_PACKAGE_SYSSTAT is not set # BR2_PACKAGE_TI_UTILS is not set # BR2_PACKAGE_UBOOT_TOOLS is not set BR2_PACKAGE_UDEV=y BR2_PACKAGE_UDEV_RULES_GEN=y # BR2_PACKAGE_UDEV_ALL_EXTRAS is not set # BR2_PACKAGE_UNIONFS is not set # BR2_PACKAGE_USB_MODESWITCH is not set # BR2_PACKAGE_USBMOUNT is not set # BR2_PACKAGE_USBUTILS is not set # BR2_PACKAGE_WIPE is not set # BR2_PACKAGE_XFSPROGS is not set # # Interpreter languages and scripting # # BR2_PACKAGE_HASERL is not set # BR2_PACKAGE_LUA is not set # BR2_PACKAGE_MICROPERL is not set # BR2_PACKAGE_PHP is not set # BR2_PACKAGE_PYTHON is not set # BR2_PACKAGE_RUBY is not set # BR2_PACKAGE_TCL is not set # # Libraries # # # Compression and decompression # # BR2_PACKAGE_LIBARCHIVE is not set # BR2_PACKAGE_LZO is not set BR2_PACKAGE_ZLIB=y # # Crypto # # BR2_PACKAGE_BEECRYPT is not set # BR2_PACKAGE_GNUTLS is not set # BR2_PACKAGE_LIBGCRYPT is not set # BR2_PACKAGE_LIBGPG_ERROR is not set # BR2_PACKAGE_LIBNSS is not set # BR2_PACKAGE_OPENSSL is not set # # Database # # BR2_PACKAGE_BERKELEYDB is not set # # Mysql client requires a toolchain with C++ support enabled # # BR2_PACKAGE_SQLCIPHER is not set # BR2_PACKAGE_SQLITE is not set # # Filesystem # # BR2_PACKAGE_GAMIN is not set # BR2_PACKAGE_LIBCONFIG is not set # BR2_PACKAGE_LIBCONFUSE is not set BR2_PACKAGE_LIBFUSE=y # BR2_PACKAGE_LIBLOCKFILE is not set BR2_PACKAGE_LIBSYSFS=y # # Graphics # # BR2_PACKAGE_ATK is not set # BR2_PACKAGE_CAIRO is not set # BR2_PACKAGE_FONTCONFIG is not set # BR2_PACKAGE_FREETYPE is not set # BR2_PACKAGE_IMLIB2 is not set # BR2_PACKAGE_JPEG is not set # BR2_PACKAGE_LIBART is not set # BR2_PACKAGE_LIBEXIF is not set # BR2_PACKAGE_LIBGEOTIFF is not set # BR2_PACKAGE_GDK_PIXBUF is not set # # libgtk2 requires a toolchain with WCHAR and C++ support # # BR2_PACKAGE_LIBPNG is not set # # libraw requires a toolchain with C++ support enabled # # BR2_PACKAGE_LIBSVGTINY is not set # BR2_PACKAGE_LIBUNGIF is not set # # opencv requires a toolchain with C++ and WCHAR support # # # pango requires a toolchain with WCHAR and C++ support # # BR2_PACKAGE_PIXMAN is not set # BR2_PACKAGE_TIFF is not set # # webkit requires C++, WCHAR in toolchain and libgtk2 # # # Hardware handling # # BR2_PACKAGE_LIBAIO is not set # BR2_PACKAGE_LIBRAW1394 is not set # BR2_PACKAGE_TSLIB is not set # BR2_PACKAGE_LIBFTDI is not set # BR2_PACKAGE_LIBHID is not set # BR2_PACKAGE_LIBIQRF is not set # BR2_PACKAGE_LIBUSB is not set # BR2_PACKAGE_LIBV4L is not set # # Javascript # # BR2_PACKAGE_EXPLORERCANVAS is not set # BR2_PACKAGE_FLOT is not set # BR2_PACKAGE_JQUERY is not set # BR2_PACKAGE_JQUERY_SPARKLINE is not set # BR2_PACKAGE_JQUERY_VALIDATION is not set # BR2_PACKAGE_JSMIN is not set # # Networking # # BR2_PACKAGE_LIBCGI is not set # # libcgicc requires a toolchain with C++ support enabled # # BR2_PACKAGE_LIBCURL is not set # BR2_PACKAGE_LIBDNET is not set # BR2_PACKAGE_LIBESMTP is not set # BR2_PACKAGE_LIBEXOSIP2 is not set # BR2_PACKAGE_LIBIDN is not set # BR2_PACKAGE_LIBOAUTH is not set # BR2_PACKAGE_LIBMICROHTTPD is not set # BR2_PACKAGE_NEON is not set # BR2_PACKAGE_LIBMNL is not set # BR2_PACKAGE_LIBMODBUS is not set # BR2_PACKAGE_LIBMBUS is not set # BR2_PACKAGE_LIBNL is not set BR2_PACKAGE_LIBPCAP=y # BR2_PACKAGE_LIBOSIP2 is not set # BR2_PACKAGE_LIBRSYNC is not set # BR2_PACKAGE_LIBSOUP is not set # BR2_PACKAGE_LIBUPNP is not set # BR2_PACKAGE_LIBVNCSERVER is not set # # Other # # BR2_PACKAGE_FFTW is not set # BR2_PACKAGE_LIBARGTABLE2 is not set # BR2_PACKAGE_ARGP_STANDALONE is not set # BR2_PACKAGE_LIBATOMIC_OPS is not set # BR2_PACKAGE_LIBCAP is not set # BR2_PACKAGE_LIBDAEMON is not set # BR2_PACKAGE_LIBELF is not set # BR2_PACKAGE_LIBEVENT is not set # BR2_PACKAGE_LIBEV is not set # BR2_PACKAGE_LIBFFI is not set # BR2_PACKAGE_LIBGLIB2 is not set # BR2_PACKAGE_LIBICAL is not set # BR2_PACKAGE_LIBNSPR is not set # # libsigc++ requires a toolchain with C++ support enabled # # BR2_PACKAGE_LIBURCU is not set # BR2_PACKAGE_LTTNG_LIBUST is not set # BR2_PACKAGE_ORC is not set # # poco requires a toolchain with WCHAR and C++ support # # # Text and terminal handling # # # enchant requires a toolchain with C++ and WCHAR support enabled # # # icu requires a toolchain with C++ support and WCHAR enabled # # BR2_PACKAGE_NCURSES is not set # BR2_PACKAGE_NEWT is not set # BR2_PACKAGE_PCRE is not set # BR2_PACKAGE_POPT is not set # BR2_PACKAGE_READLINE is not set # BR2_PACKAGE_SLANG is not set # # JSON/XML # # BR2_PACKAGE_EXPAT is not set # BR2_PACKAGE_EZXML is not set # BR2_PACKAGE_JSON_C is not set # BR2_PACKAGE_LIBROXML is not set # BR2_PACKAGE_LIBXML2 is not set # BR2_PACKAGE_LIBXSLT is not set # BR2_PACKAGE_LIBYAML is not set # BR2_PACKAGE_MXML is not set # # xerces-c++ requires a toolchain with C++ and WCHAR support enabled # # BR2_PACKAGE_YAJL is not set # # Miscellaneous # # BR2_PACKAGE_SHARED_MIME_INFO is not set # # Networking applications # # BR2_PACKAGE_ARGUS is not set # BR2_PACKAGE_AVAHI is not set # BR2_PACKAGE_AXEL is not set # BR2_PACKAGE_BLUEZ_UTILS is not set # BR2_PACKAGE_BIND is not set # BR2_PACKAGE_BMON is not set # BR2_PACKAGE_BRIDGE_UTILS is not set # BR2_PACKAGE_BWM_NG is not set # BR2_PACKAGE_CAN_UTILS is not set # BR2_PACKAGE_CONNMAN is not set # # ctorrent requires a toolchain with C++ support enabled # # BR2_PACKAGE_CIFS_UTILS is not set # BR2_PACKAGE_CUPS is not set # BR2_PACKAGE_DHCPDUMP is not set # BR2_PACKAGE_DNSMASQ is not set # BR2_PACKAGE_DROPBEAR is not set # BR2_PACKAGE_EBTABLES is not set # BR2_PACKAGE_ETHTOOL is not set # BR2_PACKAGE_HOSTAPD is not set # # iperf requires a toolchain with C++ support enabled # # BR2_PACKAGE_IPROUTE2 is not set # BR2_PACKAGE_IPSEC_TOOLS is not set # BR2_PACKAGE_IPSET is not set # BR2_PACKAGE_IPTABLES is not set # BR2_PACKAGE_IW is not set # # Kismet requires a toolchain with C++ support enabled # # BR2_PACKAGE_LINKS is not set # BR2_PACKAGE_LRZSZ is not set # BR2_PACKAGE_MII_DIAG is not set # BR2_PACKAGE_MROUTED is not set # BR2_PACKAGE_MUTT is not set # BR2_PACKAGE_NBD is not set # BR2_PACKAGE_NCFTP is not set # BR2_PACKAGE_NETPLUG is not set # BR2_PACKAGE_NETSNMP is not set # BR2_PACKAGE_NETSTAT_NAT is not set # BR2_PACKAGE_NETWORK_MANAGER is not set # BR2_PACKAGE_NOIP is not set # BR2_PACKAGE_NFS_UTILS is not set # BR2_PACKAGE_NGIRCD is not set # BR2_PACKAGE_NGREP is not set # BR2_PACKAGE_NTP is not set # BR2_PACKAGE_NUTTCP is not set # BR2_PACKAGE_OLSR is not set # BR2_PACKAGE_OPENNTPD is not set # BR2_PACKAGE_OPENSSH is not set # BR2_PACKAGE_OPENVPN is not set # BR2_PACKAGE_PORTMAP is not set BR2_PACKAGE_PPPD=y BR2_PACKAGE_PPPD_FILTER=y # BR2_PACKAGE_PPPD_RADIUS is not set # BR2_PACKAGE_PPTP_LINUX is not set # BR2_PACKAGE_PROFTPD is not set # BR2_PACKAGE_QUAGGA is not set # BR2_PACKAGE_RADVD is not set # BR2_PACKAGE_RP_PPPOE is not set # BR2_PACKAGE_RSH_REDONE is not set # BR2_PACKAGE_RSYNC is not set # BR2_PACKAGE_SAMBA is not set # BR2_PACKAGE_SER2NET is not set # BR2_PACKAGE_SOCAT is not set # BR2_PACKAGE_SPAWN_FCGI is not set # # Squid requires a toolchain with C++ and IPv6 support enabled # # BR2_PACKAGE_STUNNEL is not set # BR2_PACKAGE_TCPDUMP is not set # BR2_PACKAGE_TCPREPLAY is not set # BR2_PACKAGE_TN5250 is not set # BR2_PACKAGE_TRANSMISSION is not set # BR2_PACKAGE_TTCP is not set # BR2_PACKAGE_UDPCAST is not set # BR2_PACKAGE_VPNC is not set # BR2_PACKAGE_VSFTPD is not set # BR2_PACKAGE_VTUN is not set # BR2_PACKAGE_WIRELESS_TOOLS is not set # BR2_PACKAGE_WPA_SUPPLICANT is not set # BR2_PACKAGE_XL2TP is not set # # Package managers # # BR2_PACKAGE_IPKG is not set # # Real-Time # # BR2_PACKAGE_XENOMAI is not set # # Shell and utilities # # BR2_PACKAGE_AT is not set # BR2_PACKAGE_DIALOG is not set # BR2_PACKAGE_FILE is not set # BR2_PACKAGE_INOTIFY_TOOLS is not set # BR2_PACKAGE_LOCKFILE_PROGS is not set # BR2_PACKAGE_LOGROTATE is not set # BR2_PACKAGE_SCREEN is not set # BR2_PACKAGE_SUDO is not set # BR2_PACKAGE_XMLSTARLET is not set # # System tools # # BR2_PACKAGE_ACL is not set # BR2_PACKAGE_ATTR is not set # BR2_PACKAGE_HTOP is not set BR2_PACKAGE_KMOD=y BR2_PACKAGE_UTIL_LINUX=y BR2_PACKAGE_UTIL_LINUX_MOUNT=y # BR2_PACKAGE_UTIL_LINUX_FSCK is not set # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set BR2_PACKAGE_UTIL_LINUX_LIBUUID=y BR2_PACKAGE_UTIL_LINUX_UUIDD=y BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set # BR2_PACKAGE_UTIL_LINUX_RENAME is not set # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set # BR2_PACKAGE_UTIL_LINUX_WALL is not set # BR2_PACKAGE_UTIL_LINUX_PARTX is not set # BR2_PACKAGE_UTIL_LINUX_ARCH is not set # BR2_PACKAGE_UTIL_LINUX_INIT is not set # BR2_PACKAGE_UTIL_LINUX_KILL is not set # BR2_PACKAGE_UTIL_LINUX_LAST is not set # BR2_PACKAGE_UTIL_LINUX_MESG is not set # BR2_PACKAGE_UTIL_LINUX_RAW is not set # BR2_PACKAGE_UTIL_LINUX_RESET is not set # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set # BR2_PACKAGE_UTIL_LINUX_WRITE is not set # # Text editors and viewers # # BR2_PACKAGE_ED is not set # BR2_PACKAGE_NANO is not set # BR2_PACKAGE_UEMACS is not set # # Host utilities # # BR2_PACKAGE_HOST_OPENOCD is not set # BR2_PACKAGE_HOST_SAM_BA is not set # BR2_PACKAGE_HOST_UBOOT_TOOLS is not set # # Filesystem images # # BR2_TARGET_ROOTFS_CRAMFS is not set # BR2_TARGET_ROOTFS_CLOOP is not set BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 BR2_TARGET_ROOTFS_EXT2_INODES=0 BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 # BR2_TARGET_ROOTFS_EXT2_NONE is not set BR2_TARGET_ROOTFS_EXT2_GZIP=y # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set # BR2_TARGET_ROOTFS_EXT2_LZMA is not set # BR2_TARGET_ROOTFS_JFFS2 is not set # BR2_TARGET_ROOTFS_UBIFS is not set # BR2_TARGET_ROOTFS_SQUASHFS is not set # BR2_TARGET_ROOTFS_TAR is not set # BR2_TARGET_ROOTFS_CPIO is not set # # initramfs requires a Linux kernel to be built # # BR2_TARGET_ROOTFS_ROMFS is not set # # Bootloaders # # BR2_TARGET_BAREBOX is not set # BR2_TARGET_UBOOT is not set # # Kernel # # BR2_LINUX_KERNEL is not set ___________________________________________________________ Ihr WEB.DE Postfach immer dabei: die kostenlose WEB.DE Mail App f?r iPhone und Android. https://produkte.web.de/freemail_mobile_startseite/