From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bernhard Fischer <rep.dot.nop@gmail.com>
Date: Thu, 25 Jan 2007 01:18:25 +0100
Subject: [Buildroot] problem with gcc and arch/tune/cpu option
In-Reply-To: <45B773BA.2060904@ifotec.com>
References: <45B773BA.2060904@ifotec.com>
Message-ID: <20070125001824.GH28221@aon.at>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

On Wed, Jan 24, 2007 at 03:56:58PM +0100, St?phane Champeau wrote:
>Hi all,
>
>I have a problem with :
>buildroot rev 17495
>ARM920T / EABI / gcc 4.2 20070117
>kernel 2.6.19.2 / binutils 2.17.50.0.9
>uclibc snapshot / busybox snapshot
>soft-float / LFS
>
>I have this error :
>Unknown CPU used in --with-cpu=arm
>make[1]: *** [configure-gcc] Erreur 1
>make[1]: quittant le r?pertoire 
>?/buildroot/toolchain_build_arm_nofpu/gcc-4.2-initial ?
>make: *** 
>[buildroot/toolchain_build_arm_nofpu/gcc-4.2-initial/.compiled] Erreur 2
>
>In fact gcc is configured with :
>--with-cpu=arm --with-arch=arm --with-tune=arm
>This is an error 
>(http://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html#ARM-Options)
>
>I think a part of patch 17473 break the toolchain :
>In the file buildroot/toolchain/gcc/gcc-uclibc-3.x.mk line 384
>if I put this :
>GCC_WITH_ARCH=--with-arch=armv4t
>GCC_WITH_TUNE=--with-tune=arm920t
>GCC_WITH_CPU=--with-cpu=arm920t
>instead of :
>GCC_WITH_ARCH=--with-arch=$(BR2_ARCH)
>GCC_WITH_TUNE=--with-tune=$(BR2_ARCH)
>GCC_WITH_CPU=--with-cpu=$(BR2_ARCH)
>I can build the toolchain

We will have to cleanup the BR2_ARCH, BR2_SUBARCH/BR2_CPU selection.. hmz

Thanks for noticing. I've reverted this bit until it gets fixed for
good. Sorry for any inconvenience this may have caused.