From: Bernhard Fischer <rep.dot.nop@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] Ogg and Vorbis patch part 2
Date: Thu, 31 May 2007 23:46:38 +0200 [thread overview]
Message-ID: <20070531214638.GE12010@aon.at> (raw)
In-Reply-To: <465F19D0.6020001@teamboyce.co.uk>
On Thu, May 31, 2007 at 07:54:08PM +0100, Rod Boyce wrote:
>
>>just
>> -$(MAKE) -C $(LIBOGG_WORKDIR) clean
>>and drop the if.
>>[snip]
>>
>>
>
>All,
>
>Attached is a new improved patch to add libvorbis and libogg to build
>root. I have only tested on 386 hopefully others can test on other
>platforms. I have a floating point unit so I do not need to use an
>integer only version.
Thanks for the update, but please see below..
>
>Regards,
>Rod Boyce
>
>diff -uN --recursive ../trunk/package/libogg/libogg.mk package/libogg/libogg.mk
>--- ../trunk/package/libogg/libogg.mk 1970-01-01 01:00:00.000000000 +0100
>+++ package/libogg/libogg.mk 2007-05-31 19:48:23.186662591 +0100
>@@ -0,0 +1,64 @@
+$(LIBVORBIS_DIR)/.unpacked: $(DL_DIR)/$(LIBVORBIS_SOURCE)
+ $(LIBVORBIS_CAT) $(DL_DIR)/$(LIBVORBIS_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ touch $@
missing CONFIG_UPDATE
[snip]
>+
>+libogg-clean:
>+ @if [ -d $(LIBOGG_DIR)/Makefile ] ; then \
>+ $(MAKE) -C $(LIBOGG_DIR) clean ; \
>+ fi;
just
-$(MAKE) -C $(LIBOGG_DIR) clean
and drop the if.
>diff -uN --recursive ../trunk/package/libogg/libogg.mk~ package/libogg/libogg.mk~
>--- ../trunk/package/libogg/libogg.mk~ 1970-01-01 01:00:00.000000000 +0100
>+++ package/libogg/libogg.mk~ 2007-05-31 19:37:14.848508875 +0100
you want --exclude='*~'
Alternatively, a simple "svn diff > ~/mypatch.diff" should do the right
thing.
[snip]
>+
>+libogg-clean:
>+ @if [ -d $(LIBOGG_DIR)/Makefile ] ; then \
>+ $(MAKE) -C $(LIBOGG_DIR) clean ; \
>+ fi;
just
-$(MAKE) -C $(LIBOGG_DIR) clean
and drop the if.
>+
>+libogg-dirclean:
>+ rm -rf $(LIBOGG_DIR) $(LIBOGG_DIR)
>+#############################################################
>+#
>+# Toplevel Makefile options
>+#
>+#############################################################
>+ifeq ($(strip $(BR2_PACKAGE_LIBOGG)),y)
>+TARGETS+=libogg
>+endif
>diff -uN --recursive ../trunk/package/libvorbis/libvorbis.mk package/libvorbis/libvorbis.mk
>--- ../trunk/package/libvorbis/libvorbis.mk 1970-01-01 01:00:00.000000000 +0100
>+++ package/libvorbis/libvorbis.mk 2007-05-31 19:48:51.409340059 +0100
>@@ -0,0 +1,78 @@
[]
>+$(DL_DIR)/$(LIBVORBIS_SOURCE):
>+ $(WGET) -P $(DL_DIR) $(LIBVORBIS_SITE)/$(LIBVORBIS_SOURCE)
>+
>+$(LIBVORBIS_DIR)/.unpacked: $(DL_DIR)/$(LIBVORBIS_SOURCE)
>+ $(LIBVORBIS_CAT) $(DL_DIR)/$(LIBVORBIS_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
missing CONFIG_UPDATE
>+ touch $@
>+
>+libvorbis-clean:
>+ @if [ -d $(LIBVORBIS_DIR)/Makefile ] ; then \
>+ $(MAKE) -C $(LIBVORBIS_DIR) clean ; \
>+ fi;
just
-$(MAKE) -C $(LIBVORBIS_DIR) clean
and drop the if.
>+
>+libvorbis-dirclean:
>+ rm -rf $(LIBVORBIS_DIR) $(LIBVORBIS_DIR)
>+
>+
>+#############################################################
>+#
>+# Toplevel Makefile options
>+#
>+#############################################################
>+ifeq ($(strip $(BR2_PACKAGE_LIBVORBIS)),y)
>+TARGETS+=libvorbis
>+endif
>diff -uN --recursive ../trunk/package/libvorbis/libvorbis.mk~ package/libvorbis/libvorbis.mk~
>--- ../trunk/package/libvorbis/libvorbis.mk~ 1970-01-01 01:00:00.000000000 +0100
>+++ package/libvorbis/libvorbis.mk~ 2007-05-31 07:06:11.547658783 +0100
you want --exclude='*~'
Alternatively, a simple "svn diff > ~/mypatch.diff" should do the right
thing.
next prev parent reply other threads:[~2007-05-31 21:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-28 13:22 [Buildroot] Ogg and Vorbis patch Rod Boyce
2007-05-29 20:25 ` Bernhard Fischer
2007-05-31 18:54 ` [Buildroot] Ogg and Vorbis patch part 2 Rod Boyce
2007-05-31 21:46 ` Bernhard Fischer [this message]
2007-06-01 10:28 ` [Buildroot] Ogg and Vorbis patch part 2.1 Rod Boyce
2007-06-01 11:33 ` Peter Korsgaard
2007-06-01 17:49 ` [Buildroot] SVN diff was " Rod Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070531214638.GE12010@aon.at \
--to=rep.dot.nop@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox