From: ulf at uclibc.org <ulf@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: at91rm9200df at91sam9260dfc at91sam9261e etc...
Date: Sat, 11 Aug 2007 16:09:35 -0700 (PDT) [thread overview]
Message-ID: <20070811230935.7FE93A606F@busybox.net> (raw)
Author: ulf
Date: 2007-08-11 16:09:34 -0700 (Sat, 11 Aug 2007)
New Revision: 19446
Log:
Cleanup Atmel boards
Modified:
trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in
trunk/buildroot/target/device/Atmel/at91sam9260dfc/Makefile.in
trunk/buildroot/target/device/Atmel/at91sam9261ek/Makefile.in
trunk/buildroot/target/device/Atmel/at91sam9263ek/Makefile.in
trunk/buildroot/target/device/Atmel/atngw100/Makefile.in
trunk/buildroot/target/device/Atmel/atstk1002/Makefile.in
Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in 2007-08-11 23:03:04 UTC (rev 19445)
+++ trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in 2007-08-11 23:09:34 UTC (rev 19446)
@@ -1,10 +1,10 @@
-ifeq ($(strip$(BOARD_NAME)),at91rm9200df)
+ifeq ($(BOARD_NAME),at91rm9200df)
LINUX_BOARD_NAME=at91rm9200ek
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.6.0.config
endif
-ifeq ($(strip$(BOARD_NAME)),at91rm9200ek)
+ifeq ($(BOARD_NAME),at91rm9200ek)
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.6.0.config
endif
Modified: trunk/buildroot/target/device/Atmel/at91sam9260dfc/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91sam9260dfc/Makefile.in 2007-08-11 23:03:04 UTC (rev 19445)
+++ trunk/buildroot/target/device/Atmel/at91sam9260dfc/Makefile.in 2007-08-11 23:09:34 UTC (rev 19446)
@@ -1,6 +1,4 @@
-ifeq ($(strip$(BOARD_NAME)),at91sam9260dfc)
+ifeq ($(BOARD_NAME),at91sam9260dfc)
LINUX26_BOARD_NAME=at91sam9260ek
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.6.0.config
endif
-
-
Modified: trunk/buildroot/target/device/Atmel/at91sam9261ek/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91sam9261ek/Makefile.in 2007-08-11 23:03:04 UTC (rev 19445)
+++ trunk/buildroot/target/device/Atmel/at91sam9261ek/Makefile.in 2007-08-11 23:09:34 UTC (rev 19446)
@@ -1,3 +1,3 @@
-ifeq ($(strip $(BOARD_NAME)),at91sam9261ek)
+ifeq ($(BOARD_NAME),at91sam9261ek)
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.6.0.config
endif
Modified: trunk/buildroot/target/device/Atmel/at91sam9263ek/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91sam9263ek/Makefile.in 2007-08-11 23:03:04 UTC (rev 19445)
+++ trunk/buildroot/target/device/Atmel/at91sam9263ek/Makefile.in 2007-08-11 23:09:34 UTC (rev 19446)
@@ -1,3 +1,3 @@
-ifeq ($(strip $(BOARD_NAME)),at91sam9263ek)
+ifeq ($(BOARD_NAME),at91sam9263ek)
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.6.0.config
endif
Modified: trunk/buildroot/target/device/Atmel/atngw100/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/atngw100/Makefile.in 2007-08-11 23:03:04 UTC (rev 19445)
+++ trunk/buildroot/target/device/Atmel/atngw100/Makefile.in 2007-08-11 23:09:34 UTC (rev 19446)
@@ -1,12 +1,12 @@
-ATNGW100_PATH=target/device/Atmel/atngw100
-
+ifeq ($(BOARD_NAME),atngw100)
#BR2_PACKAGE_BUSYBOX_CONFIG=$(ATNGW100_PATH)/busybox.config
#UCLIBC_CONFIG_FILE=target/device/Atmel/uClibc.config.$(ARCH)
-TARGET_SKELETON=$(ATNGW100_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(ATNGW100_PATH)/device_table.txt
+TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
+TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
ifeq ($(strip $(BR2_PACKAGE_LINUX)),y)
#LINUX26_FORMAT=uImage
-#LINUX26_KCONFIG=$(ATNGW100_PATH)/linux26.config
+#LINUX26_KCONFIG=$(BOARD_PATH)/linux26.config
endif
+endif
Modified: trunk/buildroot/target/device/Atmel/atstk1002/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/Makefile.in 2007-08-11 23:03:04 UTC (rev 19445)
+++ trunk/buildroot/target/device/Atmel/atstk1002/Makefile.in 2007-08-11 23:09:34 UTC (rev 19446)
@@ -1,12 +1,12 @@
-ATSTK1002_PATH=target/device/Atmel/atstk1002
-
+ifeq ($(BOARD_NAME),atstk1002)
#BR2_PACKAGE_BUSYBOX_CONFIG=$(ATSTK1000_PATH)/busybox.config
#UCLIBC_CONFIG_FILE=target/device/Atmel/uClibc.config.$(ARCH)
-TARGET_SKELETON=$(ATSTK1002_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(ATSTK1002_PATH)/device_table.txt
+TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
+TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
ifeq ($(strip $(BR2_PACKAGE_LINUX)),y)
#LINUX26_FORMAT=uImage
-#LINUX26_KCONFIG=$(ATSTK1000_PATH)/linux26.atstk1002.config
+#LINUX26_KCONFIG=$(BOARD_PATH)/linux26.atstk1002.config
endif
+endif
next reply other threads:[~2007-08-11 23:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-11 23:09 ulf at uclibc.org [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-01-31 21:44 [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: at91rm9200df at91sam9260dfc at91sam9261e etc ulf at uclibc.org
2009-01-31 22:03 ` Peter Korsgaard
2009-01-31 22:29 ` Ulf Samuelsson
2008-03-30 20:42 ulf at uclibc.org
2007-07-29 7:34 ulf at uclibc.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070811230935.7FE93A606F@busybox.net \
--to=ulf@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox