From: ulf at uclibc.org <ulf@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc: init.d
Date: Fri, 17 Aug 2007 06:02:52 -0700 (PDT) [thread overview]
Message-ID: <20070817130252.CE227A45E4@busybox.net> (raw)
Author: ulf
Date: 2007-08-17 06:02:52 -0700 (Fri, 17 Aug 2007)
New Revision: 19540
Log:
Update atstk1002 target skeleton
Modified:
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/asound.state
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/hosts
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/inetd.conf
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K20alsa-utils
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K70sendsig
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K80netfs
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K85network
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K90localfs
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S01hotplug
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S02hostname
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S03bootsplash
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S08syslog
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S09klog
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S10modules-init
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S15localfs
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S20network
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S40telnetd
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S41inetd
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S42httpd
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S43ntp
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S49netfs
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S50alsa-utils
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S99splash
trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/passwd
Changeset:
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/asound.state
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/asound.state 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/asound.state 2007-08-17 13:02:52 UTC (rev 19540)
@@ -7,7 +7,7 @@
iface MIXER
name 'Master Playback Volume'
value.0 21
- value.1 20
+ value.1 21
}
control.2 {
comment.access 'read write'
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/hosts
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/hosts 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/hosts 2007-08-17 13:02:52 UTC (rev 19540)
@@ -1,11 +1,12 @@
-127.0.0.1 localhost.localdomain localhost
-127.0.1.1 stk1000.example.net stk1000
+127.0.0.1 localhost.localdomain localhost
+127.0.1.1 stk1000.example.net stk1000
# The following lines are desirable for IPv6 capable hosts
-::1 ip6-localhost ip6-loopback
+::1 localhost
+::1 ip6-localhost ip6-loopback
+::1 stk1000.example.net stk1000
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
-
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/inetd.conf
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/inetd.conf 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/inetd.conf 2007-08-17 13:02:52 UTC (rev 19540)
@@ -1,4 +1,3 @@
-ftp stream tcp nowait root.root /usr/sbin/ftpd ftpd -a
#netbios-ssn stream tcp nowait root.root /usr/sbin/smbd smbd
#netbios-ns dgram udp wait root.root /usr/sbin/nmbd nmbd
-swat stream tcp nowait.400 root.root /usr/sbin/swat swat
+#swat stream tcp nowait.400 root.root /usr/sbin/swat swat
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K20alsa-utils
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K20alsa-utils 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K20alsa-utils 2007-08-17 13:02:52 UTC (rev 19540)
@@ -5,10 +5,10 @@
# Exit silently if alsa-utils isn't installed
[ -x ${PROGRAM} ] || exit 0
-echo -n "Saving mixer state:"
-if ${PROGRAM} store > /dev/null 2> /dev/null; then
- echo " done"
+echo -n "Saving mixer state: "
+if ${PROGRAM} store; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K70sendsig
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K70sendsig 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K70sendsig 2007-08-17 13:02:52 UTC (rev 19540)
@@ -0,0 +1 @@
+#!/bin/sh
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K80netfs
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K80netfs 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K80netfs 2007-08-17 13:02:52 UTC (rev 19540)
@@ -0,0 +1 @@
+#!/bin/sh
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K85network
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K85network 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K85network 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,10 +2,10 @@
IFDOWN=/sbin/ifdown
-echo -n "Stopping networking:"
+echo -n "Stopping networking: "
if ${IFDOWN} -a; then
- echo " done"
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K90localfs
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K90localfs 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/K90localfs 2007-08-17 13:02:52 UTC (rev 19540)
@@ -0,0 +1 @@
+#!/bin/sh
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S01hotplug
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S01hotplug 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S01hotplug 2007-08-17 13:02:52 UTC (rev 19540)
@@ -1,8 +1,8 @@
-#! /bin/sh
+#!/bin/sh
-echo -n "Setting up mdev:"
+echo -n "Setting up mdev: "
set -e
-trap 'echo " failed"' EXIT
+trap 'echo "failed"' EXIT
/bin/ln -s /proc/self/fd /dev/fd
/bin/ln -s /proc/self/fd/0 /dev/stdin
/bin/ln -s /proc/self/fd/1 /dev/stdout
@@ -11,4 +11,4 @@
/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
/sbin/mdev -s
trap - EXIT
-echo " done"
+echo "done"
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S02hostname
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S02hostname 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S02hostname 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,7 +2,7 @@
PROGRAM=/bin/hostname
-echo -n "Setting hostname:"
+echo -n "Setting hostname: "
[ -x ${PROGRAM} ] || (echo " missing"; exit 0)
if [ -f /etc/hostname ]; then
@@ -12,10 +12,10 @@
fi
start() {
- if ${PROGRAM} "${HOST}" > /dev/null 2> /dev/null; then
- echo " '${HOST}'"
+ if ${PROGRAM} "${HOST}"; then
+ echo "'${HOST}'"
else
- echo " failed"
+ echo "failed"
exit 1
fi
}
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S03bootsplash
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S03bootsplash 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S03bootsplash 2007-08-17 13:02:52 UTC (rev 19540)
@@ -5,22 +5,21 @@
FBMODEFILE="/etc/fb.modes"
SPLASHFILE="/etc/stk1000bootsplash.jpg"
-echo -n "Bootsplash image:"
+echo -n "Bootsplash image: "
if [ ! -x "${FBV}" -o ! -x "${FBSET}" -o \
! -f "${SPLASHFILE}" -o ! -f "${FBMODEFILE}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ! ${FBSET} 320x240-68 > /dev/null 2> /dev/null; then
- echo " failed"
+if ! ${FBSET} 320x240-68; then
+ echo "failed"
exit 1
fi
-${FBV} ${SPLASHFILE} < /dev/null > /dev/null 2> /dev/null &
+${FBV} ${SPLASHFILE} > /dev/null &
if [ $? -eq 0 ]; then
- echo " loaded"
- kill `pidof ${FBV}` > /dev/null 2> /dev/null
+ echo "loaded"
else
- echo " failed"
+ echo "failed"
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S08syslog
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S08syslog 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S08syslog 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,23 +2,23 @@
SYSLOGD=/sbin/syslogd
-echo -n "Starting syslogd:"
+echo -n "Starting syslogd: "
if [ ! -x "${SYSLOGD}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ${SYSLOGD} > /dev/null 2> /dev/null; then
- echo " done"
+if ${SYSLOGD}; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
-echo -n "Log messages to syslog:"
-if echo 4 4 1 7 > /proc/sys/kernel/printk 2> /dev/null; then
- echo " done"
+echo -n "Log messages to syslog: "
+if echo 4 4 1 7 > /proc/sys/kernel/printk; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S09klog
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S09klog 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S09klog 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,15 +2,15 @@
KLOGD=/sbin/klogd
-echo -n "Starting klogd:"
+echo -n "Starting klogd: "
if [ ! -x "${KLOGD}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ${KLOGD} > /dev/null 2> /dev/null; then
- echo " done"
+if ${KLOGD}; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S10modules-init
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S10modules-init 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S10modules-init 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,9 +2,9 @@
MODPROBE=/sbin/modprobe
-echo -n "Probing modules:"
+echo -n "Probing modules: "
if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then
- echo " missing"
+ echo "missing"
exit 1
else
echo
@@ -13,7 +13,7 @@
grep '^[^#]' "/etc/modules" | \
while read module args; do
[ "$module" ] || continue
- if ${MODPROBE} $module $args > /dev/null 2> /dev/null; then
+ if ${MODPROBE} $module $args; then
echo " $module loaded"
else
echo " $module failed"
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S15localfs
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S15localfs 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S15localfs 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,10 +2,10 @@
MOUNT=/bin/mount
-echo -n "Mounting local filesystems:"
-if ${MOUNT} -a > /dev/null 2> /dev/null; then
- echo " done"
+echo -n "Mounting local filesystems: "
+if ${MOUNT} -a; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S20network
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S20network 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S20network 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,10 +2,10 @@
IFUP=/sbin/ifup
-echo -n "Network interfaces:"
-if ${IFUP} -a > /dev/null 2> /dev/null; then
- echo " done"
+echo -n "Network interfaces: "
+if ${IFUP} -a; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S40telnetd
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S40telnetd 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S40telnetd 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,15 +2,15 @@
TELNETD=/usr/sbin/telnetd
-echo -n "Starting telnetd:"
+echo -n "Starting telnetd: "
if [ ! -x "${TELNETD}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ${TELNETD} -l /bin/ash > /dev/null 2> /dev/null; then
- echo " done"
+if ${TELNETD} -l /bin/ash; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S41inetd
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S41inetd 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S41inetd 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,15 +2,15 @@
INETD=/usr/sbin/inetd
-echo -n "Starting inted:"
+echo -n "Starting inted: "
if [ ! -x "${INETD}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ${INETD} > /dev/null 2> /dev/null; then
- echo " done"
+if ${INETD}; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S42httpd
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S42httpd 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S42httpd 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,15 +2,15 @@
HTTPD=/usr/sbin/httpd
-echo -n "Starting httpd:"
+echo -n "Starting httpd: "
if [ ! -x "${HTTPD}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ${HTTPD} -h /www > /dev/null 2> /dev/null; then
- echo " done"
+if ${HTTPD} -h /www; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S43ntp
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S43ntp 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S43ntp 2007-08-17 13:02:52 UTC (rev 19540)
@@ -5,22 +5,22 @@
if [ -f /etc/default/ntpdate ]; then
. /etc/default/ntpdate
else
- echo " missing /etc/default/ntpdate"
+ echo "WARNING: missing /etc/default/ntpdate"
exit 1
fi
-echo -n "Starting ntpdate:"
+echo -n "Starting ntpdate: "
if [ ! -x ${NTPDATE} ]; then
- echo " missing"
+ echo "missing"
echo -n " WARNING: could not syncronize clock, "
echo "edit NTPSERVERS in /etc/default/ntpdate."
exit 1
fi
-if ${NTPDATE} $NTPOPTIONS $NTPSERVERS > /dev/null 2> /dev/null; then
- echo " done"
+if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
echo -n " WARNING: could not syncronize clock, "
echo "edit NTPSERVERS in /etc/default/ntpdate."
exit 1
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S49netfs
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S49netfs 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S49netfs 2007-08-17 13:02:52 UTC (rev 19540)
@@ -2,10 +2,10 @@
MOUNT=/bin/mount
-echo -n "Mounting remote filesystems:"
-if ${MOUNT} -t nfs -a > /dev/null 2> /dev/null; then
- echo " done"
+echo -n "Mounting remote filesystems: "
+if ${MOUNT} -t nfs -a; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S50alsa-utils
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S50alsa-utils 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S50alsa-utils 2007-08-17 13:02:52 UTC (rev 19540)
@@ -5,15 +5,15 @@
# Exit silently if alsa-utils isn't installed
[ -x ${PROGRAM} ] || exit 0
-echo -n "Restoring mixer state:"
+echo -n "Restoring mixer state: "
if [ ! -f /etc/asound.state ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-if ${PROGRAM} restore > /dev/null 2> /dev/null; then
- echo " done"
+if ${PROGRAM} restore; then
+ echo "done"
else
- echo " failed"
+ echo "failed"
exit 1
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S99splash
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S99splash 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/init.d/S99splash 2007-08-17 13:02:52 UTC (rev 19540)
@@ -3,16 +3,15 @@
PROGRAM=/usr/bin/fbv
SPLASHFILE="/etc/stk1000splash.jpg"
-echo -n "Splash image:"
+echo -n "Splash image: "
if [ ! -x "${PROGRAM}" -o ! -f "${SPLASHFILE}" ]; then
- echo " missing"
+ echo "missing"
exit 1
fi
-${PROGRAM} ${SPLASHFILE} < /dev/null > /dev/null 2>/dev/null &
+${PROGRAM} ${SPLASHFILE} > /dev/null &
if [ $? -eq 0 ]; then
- echo " loaded"
- kill `pidof ${PROGRAM}` > /dev/null 2> /dev/null
+ echo "loaded"
else
- echo " failed"
+ echo "failed"
fi
Modified: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/passwd
===================================================================
--- trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/passwd 2007-08-17 13:01:49 UTC (rev 19539)
+++ trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc/passwd 2007-08-17 13:02:52 UTC (rev 19540)
@@ -1,4 +1,4 @@
-root:$1$rsjkLsTU$zdulfnYQgyKmN3e0Fiw7C1:0:0:root:/:/bin/ash
+root:$1$rsjkLsTU$zdulfnYQgyKmN3e0Fiw7C1:0:0:root:/:/bin/sh
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
bin:x:2:2:bin:/bin:/bin/sh
sys:x:3:3:sys:/dev:/bin/sh
next reply other threads:[~2007-08-17 13:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-17 13:02 ulf at uclibc.org [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-10-12 12:33 [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/atstk1002/target_skeleton/etc: init.d ulf at uclibc.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070817130252.CE227A45E4@busybox.net \
--to=ulf@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox