From: ulf at uclibc.org <ulf@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91rm9200df
Date: Wed, 26 Sep 2007 15:22:56 -0700 (PDT) [thread overview]
Message-ID: <20070926222256.84564A5D37@busybox.net> (raw)
Author: ulf
Date: 2007-09-26 15:22:55 -0700 (Wed, 26 Sep 2007)
New Revision: 20048
Log:
Use Makefile def of busybox config
Modified:
trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in
trunk/buildroot/target/device/Atmel/at91rm9200df/at91rm9200df_defconfig
Changeset:
Modified: trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in
===================================================================
--- trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in 2007-09-26 22:12:51 UTC (rev 20047)
+++ trunk/buildroot/target/device/Atmel/at91rm9200df/Makefile.in 2007-09-26 22:22:55 UTC (rev 20048)
@@ -1,10 +1,10 @@
ifeq ($(BOARD_NAME),at91rm9200df)
LINUX_BOARD_NAME=at91rm9200ek
-BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.7.1.config
+BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.7.1.config
endif
ifeq ($(BOARD_NAME),at91rm9200ek)
-BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-1.7.1.config
+BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.7.1.config
endif
Modified: trunk/buildroot/target/device/Atmel/at91rm9200df/at91rm9200df_defconfig
===================================================================
--- trunk/buildroot/target/device/Atmel/at91rm9200df/at91rm9200df_defconfig 2007-09-26 22:12:51 UTC (rev 20047)
+++ trunk/buildroot/target/device/Atmel/at91rm9200df/at91rm9200df_defconfig 2007-09-26 22:22:55 UTC (rev 20048)
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Wed Sep 26 23:17:39 2007
+# Thu Sep 27 00:11:05 2007
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="0.10.0-svn"
@@ -218,15 +218,15 @@
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.7.1"
BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
-BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config"
+BR2_PACKAGE_BUSYBOX_CONFIG=""
# BR2_PACKAGE_BUSYBOX_HIDE_OTHERS is not set
#
# Skeleton configuration
#
# BR2_PACKAGE_BUSYBOX_SKELETON is not set
-BR2_HOSTNAME="AT91SAM9261EK"
-BR2_BANNER="Welcome to the AT91SAM9261EK"
+BR2_HOSTNAME="AT91RM9200DF"
+BR2_BANNER="Welcome to the AT91RM9200DF"
#
# The minimum needed to build a uClibc development system ---
@@ -753,8 +753,6 @@
# BR2_TARGET_AT91SAM9262EK is not set
# BR2_TARGET_AT91SAM9263EK is not set
# BR2_TARGET_AT91SAM9XEEK is not set
-# BR2_TARGET_AT91SAM9261EK_SPIMODE0 is not set
-# BR2_TARGET_AT91SAM9261EK_SPIMODE3 is not set
BR2_BOARD_NAME="at91rm9200df"
BR2_TARGET_AT91_ADVANCED_INFO=y
@@ -778,13 +776,6 @@
BR2_TARGET_DATAFLASHBOOT_AT91RM9200=y
# BR2_TARGET_DATAFLASHBOOT_AT91SAM9261 is not set
# BR2_TARGET_DATAFLASHBOOT_AT91SAM9261S is not set
-# BR2_TARGET_AT91BOOT_DATAFLASH is not set
-# BR2_TARGET_AT91BOOT_DATAFLASHCARD is not set
-# BR2_TARGET_AT91BOOT_NANDFLASH is not set
-# BR2_TARGET_AT91BOOT_FLASH is not set
-# BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT is not set
-# BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM is not set
-# BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM is not set
#
# It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)
next reply other threads:[~2007-09-26 22:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-26 22:22 ulf at uclibc.org [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-01-31 21:04 [Buildroot] svn commit: trunk/buildroot/target/device/Atmel/at91rm9200df ulf at uclibc.org
2009-01-29 23:02 ulf at uclibc.org
2009-01-29 21:27 ulf at uclibc.org
2009-01-27 6:05 ulf at uclibc.org
2007-09-26 23:20 ulf at uclibc.org
2007-09-26 22:11 ulf at uclibc.org
2007-09-24 22:49 ulf at uclibc.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070926222256.84564A5D37@busybox.net \
--to=ulf@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox