From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hamish Moffatt Date: Tue, 16 Oct 2007 16:44:09 +1000 Subject: [Buildroot] buildroot for armeb, gcc-4.2.1 fails to build In-Reply-To: <006b01c80fb9$f07efe40$01c4af0a@Glamdring> References: <20071016055638.GA23927@cloud.net.au> <006b01c80fb9$f07efe40$01c4af0a@Glamdring> Message-ID: <20071016064409.GA24904@cloud.net.au> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Tue, Oct 16, 2007 at 08:00:07AM +0200, Ulf Samuelsson wrote: >> And this is caused by soft-float. >> Summary of situation: >> arm EABI hard-float: builds. >> armeb EABI hard-float: libgcc_s.so fails to link due to incorrect file >> format of libc.so >> arm/armeb OABI hard-float: builds. >> arm/armeb OABI soft-float: fails as above (both endians fail the same >> way). >> I haven't tried soft-float EABI. > > I tried the ARM integrator, on Bernhards recommendation > a few weeks ago, and that would build an EABI 4.2.1 softfloat toolchain, > a few days later, it was broken again. > I think that there must be some uClibc options which should be set > in the correct way for the build to complete. I just built arm + EABI + soft-float + 4.2.1 successfully. I'm trying armeb now, although I'm not hopefully given that the same configuration except for soft-float failed (with non-float-related errors). Hamish -- Hamish Moffatt VK3SB