From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hamish Moffatt Date: Thu, 18 Oct 2007 12:52:03 +1000 Subject: [Buildroot] an error in make ( no .config under kernel directory ) In-Reply-To: References: <20071018013332.GA724@cloud.net.au> Message-ID: <20071018025203.GB2149@cloud.net.au> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Thu, Oct 18, 2007 at 09:50:51AM +0800, Steven Woody wrote: > On 10/18/07, Hamish Moffatt wrote: > > > cp -dpRf package/config/buildroot-config > > > /home/src/buildroot/project_build_arm/M501/buildroot-config > > > cp -dpf /home/src/buildroot/project_build_arm/M501/linux-2.6.22.10/.config > > > ... > > > > > > and, i go to dl/M501/linux-2.6.22.10 directory and found no .config > > > file. what's wrong here? the linux-2.6.10 kernel was downloaded in > > > another computer and was put in dl directory. > > > > You have to specify the filename for your configuration file in "make > > menuconfig" -> kernel. > > understood. but where can i got a configureation file for the > 2.6.22.10? havn't buildroot supplied a default one suitable to > embedded target for me? I don't think buildroot can supply a meaningful default configuration file unless you are using one of the standard target boards found under target/device (and none of them match an M501). So you need to make your own. It appears that "make linux26-menuconfig" should launch the configuration editor for you. Hamish -- Hamish Moffatt VK3SB