From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Heidelberg Date: Sat, 9 Aug 2008 14:03:44 +0200 Subject: [Buildroot] [PATCH] u-boot: fix wrong syntax in Makefile Message-ID: <200808091403.44855.markus.heidelberg@web.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net u-boot: fix wrong syntax in Makefile Some $(call insert_define, ..., ...) calls were lacking the comma after the variable. That didn't lead to a syntax error but it didn't have any effect on the output u-boot/include/config.h --- target/u-boot/Makefile.in | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/target/u-boot/Makefile.in b/target/u-boot/Makefile.in index d7af24c..9148e05 100644 --- a/target/u-boot/Makefile.in +++ b/target/u-boot/Makefile.in @@ -98,16 +98,16 @@ ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"") $(call insert_define, "CONFIG_ETHADDR", $(BR2_TARGET_UBOOT_ETHADDR)) endif ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"") - $(call insert_define "CONFIG_ETH2ADDR", $(BR2_TARGET_UBOOT_ETH1ADDR)) + $(call insert_define, "CONFIG_ETH2ADDR", $(BR2_TARGET_UBOOT_ETH1ADDR)) endif ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTARGS)),"") - $(call insert_define "CONFIG_BOOTARGS", $(BR2_TARGET_UBOOT_BOOTARGS)) + $(call insert_define, "CONFIG_BOOTARGS", $(BR2_TARGET_UBOOT_BOOTARGS)) endif ifneq ($(strip $(BR2_TARGET_UBOOT_BOOTCMD)),"") - $(call insert_define "CONFIG_BOOTCOMMAND", $(BR2_TARGET_UBOOT_BOOTCMD)) + $(call insert_define, "CONFIG_BOOTCOMMAND", $(BR2_TARGET_UBOOT_BOOTCMD)) endif ifneq ($(strip $(BR2_TARGET_UBOOT_SILENT)),"") - $(call insert_define "CONFIG_SILENT_CONSOLE", "") + $(call insert_define, "CONFIG_SILENT_CONSOLE", "") endif @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE) touch $@