From: ulf at uclibc.org <ulf@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit: trunk/buildroot/target/u-boot/2009.01-rc1
Date: Tue, 6 Jan 2009 16:09:54 +0000 (UTC) [thread overview]
Message-ID: <20090106160954.EBFDF76BFE@busybox.osuosl.org> (raw)
Author: ulf
Date: 2009-01-06 16:09:53 +0000 (Tue, 06 Jan 2009)
New Revision: 24699
Log:
Use the correct sam9g20 patch for 2009.01-rc1
Modified:
trunk/buildroot/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
Changeset:
Modified: trunk/buildroot/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
===================================================================
--- trunk/buildroot/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch 2009-01-06 14:40:24 UTC (rev 24698)
+++ trunk/buildroot/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-005-at91sam9g20ek.patch 2009-01-06 16:09:53 UTC (rev 24699)
@@ -10,13 +10,13 @@
+at91sam9g20ek_dataflash_cs1_config \
+at91sam9g20ek_config : unconfig
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
-+ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
++ echo "#define CONFIG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
-+ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
++ echo "#define CONFIG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ else \
-+ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
++ echo "#define CONFIG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91
@@ -61,7 +61,7 @@
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK 396288000 /* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK 132096000 /* peripheral = main / 3 */
-+#define CFG_HZ 1000000 /* 1us resolution */
++#define CONFIG_SYS_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
@@ -109,7 +109,7 @@
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
-+#define CONFIG_CMD_NAND 1
++#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
@@ -119,22 +119,22 @@
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
-+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
-+#define CFG_MAX_DATAFLASH_BANKS 2
-+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-+#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x22 << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
-+
++#define AT91SAM9260_BASE_SPI0 0xfffc8000
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
-+#define CFG_MAX_NAND_DEVICE 1
-+#define CFG_NAND_BASE 0x40000000
-+#define CFG_NAND_DBW_8 1
++#define CONFIG_SYS_MAX_NAND_DEVICE 1
++#define CONFIG_SYS_NAND_BASE 0x40000000
++#define CONFIG_SYS_NAND_DBW_8 1
+
+/* NOR flash - no real flash on this board */
-+#define CFG_NO_FLASH 1
++#define CONFIG_SYS_NO_FLASH 1
+
+/* Ethernet */
+#define CONFIG_MACB 1
@@ -142,57 +142,57 @@
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
-+
++#define AT91SAM9260_BASE_EMAC 0xfffc4000
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define LITTLEENDIAN 1
+#define CONFIG_DOS_PARTITION 1
-+#define CFG_USB_OHCI_CPU_INIT 1
-+#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */
-+#define CFG_USB_OHCI_SLOT_NAME "at91sam9g20"
-+#define CFG_USB_OHCI_MAX_ROOT_PORTS 2
++#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
++#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */
++#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20"
++#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
-+#define CFG_LOAD_ADDR 0x22000000 /* load address */
++#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
-+#define CFG_MEMTEST_START PHYS_SDRAM
-+#define CFG_MEMTEST_END 0x23e00000
++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
-+#ifdef CFG_USE_DATAFLASH_CS0
++#ifdef CONFIG_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-+#define CFG_ENV_IS_IN_DATAFLASH 1
-+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-+#define CFG_ENV_OFFSET 0x4200
-+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-+#define CFG_ENV_SIZE 0x4200
++#define CONFIG_ENV_IS_IN_DATAFLASH 1
++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
++#define CONFIG_ENV_OFFSET 0x4200
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
-+#elif CFG_USE_DATAFLASH_CS1
++#elif CONFIG_USE_DATAFLASH_CS1
+
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-+#define CFG_ENV_IS_IN_DATAFLASH 1
-+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-+#define CFG_ENV_OFFSET 0x4200
-+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET)
-+#define CFG_ENV_SIZE 0x4200
++#define CONFIG_ENV_IS_IN_DATAFLASH 1
++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
++#define CONFIG_ENV_OFFSET 0x4200
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
-+#else /* CFG_USE_NANDFLASH */
++#else /* CONFIG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
-+#define CFG_ENV_IS_IN_NAND 1
-+#define CFG_ENV_OFFSET 0x60000
-+#define CFG_ENV_OFFSET_REDUND 0x80000
-+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
++#define CONFIG_ENV_IS_IN_NAND 1
++#define CONFIG_ENV_OFFSET 0x60000
++#define CONFIG_ENV_OFFSET_REDUND 0x80000
++#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
@@ -204,21 +204,21 @@
+#endif
+
+#define CONFIG_BAUDRATE 115200
-+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
++#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
-+#define CFG_PROMPT "U-Boot> "
-+#define CFG_CBSIZE 256
-+#define CFG_MAXARGS 16
-+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-+#define CFG_LONGHELP 1
++#define CONFIG_SYS_PROMPT "U-Boot> "
++#define CONFIG_SYS_CBSIZE 256
++#define CONFIG_SYS_MAXARGS 16
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
++#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
-+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
-+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
++#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
@@ -231,7 +231,7 @@
===================================================================
--- a/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4) (revision 0)
+++ b/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,79 @@
+@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
@@ -271,27 +271,26 @@
+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
+
-+static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd,
++ int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
-+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
-+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
-+ switch (cmd) {
-+ case NAND_CTL_SETCLE:
-+ IO_ADDR_W |= MASK_CLE;
-+ break;
-+ case NAND_CTL_SETALE:
-+ IO_ADDR_W |= MASK_ALE;
-+ break;
-+ case NAND_CTL_CLRNCE:
-+ at91_set_gpio_value(AT91_PIN_PC14, 1);
-+ break;
-+ case NAND_CTL_SETNCE:
-+ at91_set_gpio_value(AT91_PIN_PC14, 0);
-+ break;
++ if (ctrl & NAND_CTRL_CHANGE) {
++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
++ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
++
++ if (ctrl & NAND_CLE)
++ IO_ADDR_W |= MASK_CLE;
++ if (ctrl & NAND_ALE)
++ IO_ADDR_W |= MASK_ALE;
++
++ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
++ this->IO_ADDR_W = (void *) IO_ADDR_W;
+ }
-+ this->IO_ADDR_W = (void *) IO_ADDR_W;
++
++ if (cmd != NAND_CMD_NONE)
++ writeb(cmd, this->IO_ADDR_W);
+}
+
+static int at91sam9g20ek_nand_ready(struct mtd_info *mtd)
@@ -301,11 +300,11 @@
+
+int board_nand_init(struct nand_chip *nand)
+{
-+ nand->eccmode = NAND_ECC_SOFT;
-+#ifdef CFG_NAND_DBW_16
++ nand->ecc.mode = NAND_ECC_SOFT;
++#ifdef CONFIG_SYS_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
-+ nand->hwcontrol = at91sam9g20ek_nand_hwcontrol;
++ nand->cmd_ctrl = at91sam9g20ek_nand_hwcontrol;
+ nand->dev_ready = at91sam9g20ek_nand_ready;
+ nand->chip_delay = 20;
+
@@ -351,7 +350,7 @@
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
-+
++#include <netdev.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
@@ -408,9 +407,9 @@
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
-+#ifdef CFG_NAND_DBW_16
++#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_DBW_16 |
-+#else /* CFG_NAND_DBW_8 */
++#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(3));
@@ -665,11 +664,11 @@
+#include <asm/hardware.h>
+#include <dataflash.h>
+
-+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
++AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
-+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-+ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
++struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
+};
+
+/*define the area offsets*/
@@ -795,7 +794,7 @@
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
-+ rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
++ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
next reply other threads:[~2009-01-06 16:09 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-06 16:09 ulf at uclibc.org [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-01-06 16:24 [Buildroot] svn commit: trunk/buildroot/target/u-boot/2009.01-rc1 ulf at uclibc.org
2009-01-06 16:24 ulf at uclibc.org
2009-01-06 16:33 ` Peter Korsgaard
2009-01-06 16:21 ulf at uclibc.org
2009-01-06 16:17 ulf at uclibc.org
2009-01-06 16:17 ulf at uclibc.org
2009-01-06 16:32 ` Peter Korsgaard
2009-01-06 16:13 ulf at uclibc.org
2009-01-06 16:10 ulf at uclibc.org
2009-01-03 0:06 ulf at uclibc.org
2009-01-06 14:37 ` Peter Korsgaard
2009-01-06 15:16 ` Ulf Samuelsson
2009-01-06 15:26 ` Peter Korsgaard
2009-01-06 15:56 ` Ulf Samuelsson
2009-01-06 16:18 ` Peter Korsgaard
2009-01-06 17:22 ` Ulf Samuelsson
2009-01-06 18:13 ` Peter Korsgaard
2009-01-03 0:05 ulf at uclibc.org
2009-01-03 0:04 ulf at uclibc.org
2009-01-06 14:39 ` Peter Korsgaard
2009-01-06 15:20 ` Ulf Samuelsson
2009-01-06 15:28 ` Peter Korsgaard
2009-01-06 16:03 ` Ulf Samuelsson
2009-01-03 0:04 ulf at uclibc.org
2009-01-03 0:03 ulf at uclibc.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090106160954.EBFDF76BFE@busybox.osuosl.org \
--to=ulf@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox