From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Wed, 7 Jan 2009 07:29:21 +0100
Subject: [Buildroot] Which u-boot/buildroot version for ppc8272?
In-Reply-To: <loom.20090106T224840-114@post.gmane.org>
References: <loom.20090106T043218-43@post.gmane.org>
	<87ljtovpem.fsf@macbook.be.48ers.dk>
	<loom.20090106T224840-114@post.gmane.org>
Message-ID: <20090107072921.3740d709@hcegtvedt>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

On Tue, 6 Jan 2009 22:53:33 +0000 (UTC)
Daniel Ng <daniel_ng11@lycos.com> wrote:

> Peter Korsgaard <jacmet@...> writes:
> > Yes, u-boot recently broke. I fixed it up yesterday and it builds
> > for me for a 603e (83xx).
> > 
> 
> Hi Peter,
> 
> I've just tried the latest (buildroot-20090106.tar.bz2) but get the
> same error-
> 
> make[1]: Entering directory 
> `/home/dng/buildroot/project_build_powerpc/uclibc/u-boot-2009.01-rc1'
> make[1]: *** No rule to make target `_config'.  Stop.

Here is your error

> make[1]: Leaving directory
> `/home/dng/buildroot/project_build_powerpc/uclibc/u- boot-2009.01-rc1'
> make: ***
> [/home/dng/buildroot/project_build_powerpc/uclibc/u-boot-2009.01-
> rc1/.configured] Error 2
> 
> In 'make menuconfig', all I did was:
> 
> 1) Specify PowerPC 603e
> 2) Select u-boot
> 
> -everything else was left as their defaults.
> 
> Perhaps I need to change another menuconfig setting?
> 

You need to set BR2_TARGET_UBOOT_BOARDNAME in Kconfig.

-- 
Best regards,
Hans-Christian Egtvedt