From mboxrd@z Thu Jan  1 00:00:00 1970
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 15 Jul 2009 11:21:05 +0200
Subject: [Buildroot] [PATCH] Add support for custom post-build script
In-Reply-To: <1247086018-18816-1-git-send-email-daniel@caiaq.de>
References: <1247086018-18816-1-git-send-email-daniel@caiaq.de>
Message-ID: <20090715092105.GG9464@buzzloop.caiaq.de>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

What about this one?


On Wed, Jul 08, 2009 at 10:46:58PM +0200, Daniel Mack wrote:
> The config help text says it all:
> 
>   Specify a script to be run after the build has finished and before
>   the BR2 starts packing the files into selected packages.
> 
>   This gives users the oportunity to do board-specific cleanups,
>   add-ons and the like, so the generated files can be used directly
>   without further processing.
> 
>   The script is called with the target directory name as first and
>   only argument. Make sure the exit code of that script is 0,
>   otherwise make will stop after calling it.
> 
> Signed-off-by: Daniel Mack <daniel@caiaq.de>
> Cc: Sven Neumann <s.neumann@raumfeld.com>
> ---
>  Makefile         |    4 ++++
>  target/Config.in |   15 +++++++++++++++
>  2 files changed, 19 insertions(+), 0 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 76dd2cd..dbeede5 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -360,6 +360,10 @@ endif
>  	find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIPCMD) 2>/dev/null || true
>  	$(TARGET_LDCONFIG) -r $(TARGET_DIR) 2>/dev/null
>  
> +ifneq ($(BR2_ROOTFS_POST_BUILD_SCRIPT),"")
> +	$(BR2_ROOTFS_POST_BUILD_SCRIPT) $(TARGET_DIR)
> +endif
> +
>  ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
>  LOCALE_WHITELIST=$(PROJECT_BUILD_DIR)/locales.nopurge
>  LOCALE_NOPURGE=$(strip $(subst ",,$(BR2_ENABLE_LOCALE_WHITELIST)))
> diff --git a/target/Config.in b/target/Config.in
> index 87abbe6..dbdc2d6 100644
> --- a/target/Config.in
> +++ b/target/Config.in
> @@ -12,6 +12,21 @@ config BR2_ROOTFS_SUFFIX
>  	help
>  	  Add a custom string to the end of the root file system name.
>  
> +config BR2_ROOTFS_POST_BUILD_SCRIPT
> +	string "Custom script to run before packing files"
> +	default ""
> +	help
> +	  Specify a script to be run after the build has finished and before
> +	  the BR2 starts packing the files into selected packages.
> +
> +	  This gives users the oportunity to do board-specific cleanups,
> +	  add-ons and the like, so the generated files can be used directly
> +	  without further processing.
> +
> +	  The script is called with the target directory name as first and
> +	  only argument. Make sure the exit code of that script is 0,
> +	  otherwise make will stop after calling it.
> +
>  comment "filesystem for target device"
>  
>  source "target/cramfs/Config.in"
> -- 
> 1.6.3.1
>