From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 19 Apr 2010 18:06:37 +0200 Subject: [Buildroot] Still can't build working rootfs with crosstool-NG toolchain In-Reply-To: References: Message-ID: <20100419180637.241cbdd0@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Mon, 19 Apr 2010 14:44:30 +0000 (UTC) Grant Edwards wrote: > I've spend the past week trying to use crosstool-NG instead of > buildroot to build a toolchain. I had been using external buildroot > toolchains for the past couple months with no problems. But, that is > unsupported by buildroot, and I'm giving up fighting that battle. Come on, it is *not* unsupported. We are trying to support it, but facing issues. > It doesn't seem to matter which toolchain I use to build the kernel, I > get the same results with both kernels. I'm using an Atmel > AT91SAM9G20EK development board, gcc 4.4.3, uClibc 0.9.30.2. The problem might be related to OABI vs. EABI. What's the configuration of the toolchain, the Buildroot configuration, and the kernel configuration for this ? Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com