From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Mon, 7 Jun 2010 22:22:19 +0200 Subject: [Buildroot] buildroot for Freescale P2020RDB board In-Reply-To: References: <20100607204413.540d07fe@surf> Message-ID: <20100607222219.60312e32@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Mon, 7 Jun 2010 21:18:03 +0200 Marcus Tangermann wrote: > The board is supported by recent kernels as I've managed to build a > working 2.6.33 from kernel.org using the toolchain provided by > Freescale. So maybe my problems result from the toolchain generated > within buildroot. Ah, great. You'll still have to tell how the kernel should be configured, anyway. > Sorry, I know. Unfortunately there is no further information. The > board simply stops, no console output. Ok, so it might be a non-working userspace or an incorrect console= configuration in the kernel command line. > You can download the whole BSP from Freescale: > http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=P2020&fpsp=1&tab=Design_Tools_Tab Which one exactly ? Those are multi-GB downloads, I'd prefer to pick the right one from the beginning. Or maybe, better, you can put the toolchain only online ? > Yes, sounds reasonable ;-) Any chance to use eglibc based external > toolchains? If they support --sysroot, then yes. If then don't, then no. What does CROSS-gcc -v from your toolchain returns ? Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com