From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Tue, 27 Jul 2010 20:24:44 +0200 Subject: [Buildroot] How to build xipImage? In-Reply-To: References: Message-ID: <20100727202444.76f9f85d@surf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Tue, 13 Jul 2010 20:09:30 +0200 Rossi Mario wrote: > I'm trying to build an xipImage. > > In linux26-menuconfig i enabled "Kernel Execute In Place from ROM" > but when compiling it, there is an error "Kernel configured for XIP > etc etc" "Only the xipImage target etc". Can you give the full errors and not just "etc etc" ? > How can i set this values if in "kernel binary format" there is not > it? We can add support for this in the list of kernel binary format. On ARM, it seems one must build the kernel with "make xipImage" to get a XIP image. Would this be enough ? If so, please try the attached (untested) patch. Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: xipimage.patch Type: text/x-patch Size: 804 bytes Desc: not available URL: